SolderSmoke Podcast #107

http://www.soldersmoke.com

On SolderSmoke 107:

SolderSmoke -- The Book!  ON SALE NOW!
Get it here: SolderSmoke: A Global Adventure in Radio Electronics

Orbits II reborn via a VK6 junkbox
NA5N's Amazing Atlanticon 2002 article
WSPR madness:
20 mw across the Atlantic.
K1JT picks up my sigs
WSPR generates interest on Hack-A-Day
Linux: Ubuntu gets SolderSmoke Thumbs-up
Somerset Supper Report
Diode Ring Mixers
Solar conditions
AA1TJ, Chloroform, and HB transistors
ET's rig
Have fun at FDIM!
MAILBAG

SolderSmoke -- The Book! On Sale Now!

SolderSmoke is the story of a secret, after-hours life in
electronics. Bill Meara started out as a normal kid, from a normal
American town. But around the age of 12, he got interested in
electronics, and he has never been the same.
To make matters worse, when he got older he became a diplomat. His
work has taken him to Panama, Honduras, El Salvador, the Spanish Basque
Country, the Dominican Republic, the Azores islands of Portugal,
London, and, most recently, Rome. In almost all of these places his
addiction to electronics caused him to seek out like-minded radio
fiends, to stay up late into the night working on strange projects, and
to build embarrassingly large antennas above innocent foreign
neighborhoods. SolderSmoke takes you into the basement workshops and
electronics parts stores of these exotic foreign places, and lets you
experience the life of an expatriate geek. If you are looking for
restaurant or hotel recommendations, look elsewhere. But if you need to
know where to get an RF choke re-wound in Santo Domingo, SolderSmoke is the book for you.
SolderSmoke is no ordinary memoir. It is a technical memoir. Each
chapter contains descriptions of Bill’s struggles to understand (really
understand) radio-electronic theory. Why does P=IE? Do holes really
flow through transistors? What is a radio wave? How does a frequency
mixer produce sum and difference frequencies? If these are the kinds
of questions that keep you up at night, this book is for you.
Finally, SolderSmoke is about brotherhood. International,
cross-border brotherhood. Through the SolderSmoke podcast we have
discovered that all around the world, in countries as different as
Sudan and Switzerland, there are geeks just like us, guys with
essentially the same story, guys who got interested in radio and
electronics as teenagers, and who have stuck with it ever since. Our
technical addiction gives us something in common, something that
transcends national differences. And our electronics gives us the means
to communicate. United by a common interest in radio, and drawn closer
together by means of the internet, we form an “International
Brotherhood of Electronic Wizards.”

http://www.lulu.com/content/paperback-book/soldersmoke/6743576

Homebrew Transistors? Careful with the Chloroform!

I suppose it was inevitable. After years of pushing the envelope with the tunnel diode, it seems like Michael, AA1TJ, is moving toward homebrewing his own transistors. Michael writes:

Hey, I found a Yahoo Group of kindred spirits late last night, 2N1150_Down; where the interest is centered on early Germanium semiconductor devices. I downloaded a book from their files that, until now, I'd only heard about. Practical Transistors and Transistor Circuits, by J.S. Kendall, first appeared in the U.K. in 1954. Believe it or not, the subject of the book is how to make the "practical" transistors referred to in his title! Of course, these are point-contact devices built from a pair of cat's whiskers on a slab of "P-type" Germanium salvaged from diodes. I especially like where he writes, "Great care should be exercised owning to the anesthetic properties of the chloroform vapour...the constructor may not be aware of the danger until he is almost on the point of collapse." Oh brother!

Better yet, I found an article in the group's files taken from the March and April, 1954 issues of The Short Wave Magazine, by G3HMO. This fellow not only made his own transistor, he used it to build a one-transistor, 160m, transmitter and then went on to make contacts with it up to a distance of 30miles! He writes, "There is nothing impractical about making a point-contact transistor at home." Oh baby, crack me open a bottle of chloroform and let's get to it!

The photo above is, of course, the original point contact transistor from 1947. It looks do-able.
In searching for the picture I came across this interesting article from the author of the wonderful book on this subject "Crystal Fire" : "How Europe missed the Transistor"

Big Solar Flare -- End to the Minimum?

From a WIRED article today: "Solar flares rise and fall on an 11-year cycle, and last year marked what scientists thought was the solar minimum. But through the beginning of 2009, the sun stayed unusually quiet. That changed yesterday, when a major sunspot appeared on the backside of the sun, where it was captured by NASA’s STEREO instrument."

The NASA stereo images were nice, but the amazing picture above was taken from a backyard in Buffalo, New York by solar photographer Alan Friedman.

It seems like the effects of this new prominence will be felt here on earth on May 8. Woo Hooo! Maybe my WSPR signal will cross new oceans!

Inside a Mini-Circuits Mixer, and the Dissing of DSB

I'm not crazy about using integrated circuits, especially the really complex ones for which true understanding of how they work is impossible. The Mini-Circuits mixers are not, of course ICs, but for me they too have always had a whiff of the "black-box" about them. Thomas, OZ2CPU, pulls away the veil with this photo of the innards of an SBL-1.

I came across Thomas's very interesting web site when I was installing in my QRSS beacon rig the SBL-1 mixer sent to me by Jim, AL7RV. That poor SBL had died suddenly during testing. Thomas alerted me to the cause of death: In his caption for the picture of the innards, he notes, "I was unlucky to kill this one during my first transmit experiment. The IF input can NOT accept more than +20dBm audio level."

Joop and I have been discussing diode ring mixers, and I've been reading an article about them by Paul, NA5N. It looks to me like the designers of the SBL mixers weren't really thinking of balanced modulators when they created these things. Just look at the schematic above. In a normal receiver application, LO energy goes in from the L port, your RF goes in R, and your IF (or, in a DC receiver, your AF) comes out from the I port. But when we use these things as balanced modulators, we have to put the Audio INTO the I port. You can see how too much voltage on that port would quickly release the smoke from those little hot-carrier diodes.

The data sheets are oriented to the standard application (RF into R, LO into L, IF output at I). We are told to keep the LO level at +7dBm and that the 1 db compression point for the RF input is +1dBm. But at what level should you put the AF input to the I port if you are using this thing as a balanced modulator in a weird WSPR DSB rig? Similarly, the data sheets give SWR data across a wide frequency range for the L and R ports... but not for the I port. DSB is getting dissed!

K1JT Spots My DSB QRPp WSPR Signal

2009-05-03 16:42	N2CQR		-29					K1JT		7035	4371
2009-05-03 16:38	N2CQR		-24					K1JT		7035	4371

I got into WSPR because I wanted the gratification that comes from seeing a map readout indicating that my QRP signal has crossed various oceans. Well, yesterday I crossed the pond for a second time, but this time the receiving station heard the signal more than once, so the rx station callsign appeared on the display (if the signal is heard only once, you get the line showing the path, but NOT the rx station call). And what a fine callsign it was: K1JT, Joe Taylor, Nobel Prize winner and the inventor of WSPR.

In the last SolderSmoke I got Joe's name wrong (I called him John). It must have been too early in the morning here. Anyway, I was gently corrected by Wes, W7ZOI, and I promissed to make ammends. Sorry Joe! (Thanks Wes).

The Dover Construction Club

Last night there was a meeting of the Dover Construction Club (discussed by Nigel, M0NDE, in Solder Smoke #194). For the first time, the members agreed to be photographed.

Above, in the foreground, Merv checks the main board of his softrock, Ian explains to Paul how a mod to an old FT101ZD will work, and Nigel is seen using the microscope and observe to Merv he has not soldered all the IC legs down on a SMD board. He says he knows. grin!!

Ian Keyser, G3ROO, host of Dover Construction Club. At his bench in a separate part of the workshop where he has test equipment to diagnose the inevitable faults. Here he is working on the RAMU featured in a past edition of Sprat.

In a corner of the garden a brick arch leads to the workshop door, behind the brown door hides the secret world of the amateur radio constructor. Obviously, this is something of a clandestine operation.

Tony, sitting at the other end of Ian's test area, taking down some CW.

In this workshop club members have bandsaw, milling machine, lathe, and pillar drill.

Wow! That's the kind of club that we'd all like to be part of -- Nigel's comments on SS 104 generated a lot of envious e-mail . Thanks a lot guys!

WSPRing Across the Mighty Atlantic

You have to look carefully, but in the picture above you can see a little green line stretching from Rome to Maine. That's my 20 milliwatt WSPR signal crossing the Atlantic. W1CDO's receiver picked me up at 0452 UTC yesterday.

Date	Call		SNR				W	by	loc	km	mi
2009-04-29 4:52	N2CQR		-22				0.020	W1CDO	FN43ou	6541	4064

The day/night terminator was in the mid-Atlantic at that time, so I think I had a bit of a tailwind from the gray line! But still, not bad for 20 mw in Maunder Minimum II. K1JT's software and W1CDO's receive system did the heavy lifting. Antenna here is just an end-fed wire among the buildings of central Rome.

Goats Go QRP to the Field!

Another great video from Steve and the goats.

The Flea at MIT

Nick LaPointe sent along this nice virtual tour of the famous flea market (it includes four videos):
http://eepromeagle.dyndns.org/Pick/gallery/v/mitswapfest090419/

Nick also points us to the very interesting web site of Stephanie Maksylewich (VA3UXB): http://planetstephanie.net/

Thanks Nick!

SolderSmoke 106 Podcast

http://www.soldersmoke.com

In SolderSmoke 106:

Sicily, Mt. Etna, The Godfather
DSB success on WSPR
Am I the lowest power WSPR station in the world?
Diode Ring Mixers
SolderSmoke: The Book
SolderSmoke: The Cologne?
And now, a word from our sponsor: Genesis Radio
MAILBAG

Our first sponsor: GenesisRadio

SolderSmoke is very pleased to have GenesisRadio of Australia as our first sponsor. Check out their site: http://www.genesisradio.com.au/G40/index.html

My very ugly DSB QRPP WSPR Rig

As described in SolderSmoke 106. My beacon box is the vertical aluminum box. The junk box AF Amp lies on the shelf. Like they used to say, "It's ugly, but it gets you there."

Eldon's awesome 9V QRSS rig

Amazing! That's the whole rig, keyer chip included! And those red wires you see coming off the end -- that's the loop antenna. Here is Eldon's description of this rig:

For now, even thou it worked, I have abandoned the Water Tank QRSS Encoder, for a more traditional ID Keyer (K-ID2), and I have been busy rebuilding my 9 Volt Battery QRSS transmitter.

For my first approach, I wanted to use the Manhattan style of construction using mostly SMDs. The Oscillator was very successful even thou there were NO actual Manhattan Islands use, the components are just tacked-soldered together - I guess it would have to be called the "Ugly SMD Style".

Photos of Rev-0 are available on my web site;
http://qrss.ebcon.com/WA0UtWH/Gallery/Qx/

Setting the frequency was tough, as the some initial installed component's had to be replaced to get it to oscillate and adjustable within the 100Hz QRSS band. The "Ugly SMD Style" of construction is possible, but circuit changes are difficult. I decided to etch a HB circuit board to provide for a more physically stable "component selection breadboard", where SMDs part values could be easily tried, by just pressing them down in place (which BTW works very well). I then decided to expand the etched board to include space for the K-ID2 Keyer - with the goal of direct QRSS modulation with very few additional components.

This all worked so well, that I constructed another for a final form. Note: the second transistor in the photos is a 78L05 voltage regulator, which is used to help with long term oscillator stabilization, and used to reduce the power requirement and provide battery longevity.

The final QRSS Beacon uses a SMD 2N3904 for the oscillator and is now transmitting 1.5mW into a 18 inch loop antenna, currently only my grabber shows the results. But - My plan is to build this Beacon into the center insulator of a 30m Dipole and then start looking for QRSS Grabber DX. The battery should last several days at this very low power.

My goal is: to achieve long distance, with a very physically-small transmitter, small part count, and with extremely low power.

It will take me several days to construct and install the dipole antenna, until then you can see this Beacon sending "WA0UWH" on the Seattle Grabber:

http://qrss.ebcon.com/WA0UtWH/grabber/

73's - Eldon - WA0UWH

On to the Canary Islands

Got up this morning, walked into the shack and saw on my computer screen a thin green line from Rome to the Canary Islands. I knew that my little WSPR station had reached out to new territory, and had established a new distance record (for me). Life is good!
As I've been doing, I decided to see who was at the other end of that line. It was Luis, EA8AY (pictured above). Luis's station picked up my 18 milliwatt signal at 2106 UTC on April 24. The distance was 1871 miles (3011 kilometers). I was 23 db below the noise.
Luis has a very nice web page: http://www.ea8ay.com/index.html (Warning: This site will likely cause feelings of extreme jealousy: Luis is living in a fantastic location, with a beautiful family AND he is the owner of an Argonaut 509!)
On his site, Luis has a nice video that will give you a sense of what WSPR is like:


wspr with 100 mw from luis on Vimeo.