Should I Put My Sony Computer in the Oven?

In a recent podcast I asked for help with my wife's ailing Sony Vaios computer. The graphics card has gone toes up. Sony acknowledges that they had BIG problems with the NVIDIA graphics cards, but even though our computer has an NVIDIA graphics card and has all the symptoms that come with the NVIDIA graphics card problem, because our particular model is not on their list of affected computers, they won't fix it. (Mental note: Don't buy any more Sony computers!)

Anyway, KB1SNG recommends putting the mother board in the oven:

As crazy as it may sound, you could try putting the motherboard in the oven.
Many people (including myself) have tried this with success.
I did it a while ago, and I can't remember if this ( http://www.overclockers.com/forums/showthread.php?t=606658 ) was the guide I used or not, but it should suffice. If I find the other link, I'll post it here.73,Nick LaPointe, KB1SNG

Rogier provides this useful info:

NVIDIA lost a lawsuit with regards to a faulty graphics Chip. Caused by the fact that when they started using lead free solder. This new solder turned out not as heat resistant as thought and tends to break loose causing the chip to fail.
He continues:
Hmm that's a bold move to put the board in the oven.
On the other hand there is little to be lost and you might give it a try.
Thinking of it I rather apply the heat locally. Isolate the Graphics chip from the rest and apply a short blast of heat to the chip.
Perhaps with a hot air paint stripper....

So what do you guys think? Should I pop it in the oven? Or apply some heat? I kind of like the idea of fixing a problem caused by lead-free solder (yuck).

Immediate Gratification: WSPR shows results very fast

So you build or modify a rig and you put up a new antenna and you then spend some time wondering if you're really "getting out," right? Well, wonder no more my friends! WSPR provides almost instant feedback on your work! Here is what the display looked like for my station a short time after I connected my modified transceiver to my new 30 meter dipole. Pond crossings were rare events before.

In my last post I asked if there were others running homebrew gear on WSPR. I am not alone! Paul, M0XPD, has put together a rig far more sophisticated than mine. Paul writes:

You ask if there are any others running h/b in WSPR...

My 50mW multi-mode beacon runs WSPR, DFCW and S/MT Hell on a 10-minute, frequency-hopping cycle.

It is entirely stand-alone - severing the umbilical cord to the PC gave me a really good feeling!

I'm currently working on a set of filters (BP and LP) to allow me to run on other bands (currently I'm on 30m).

Description on my blog: http://m0xpd.blogspot.com

A good radio morning at N2CQR

Today I had one of those really good ham radio mornings in the shack. My objective was to add one more amplifier stage between the balanced modulator and the power amplifier in my Roman WSPR DSB Direct Conversion transceiver. First I had to take the balanced modulator (trifilar transformer and two diodes in a singly balanced configuration) off the board and move back, closer to the AF input jack -- I needed to make space for the new amplifier stage. For that stage I consulted Doug DeMaw's books and Wes Hayward's EMRFD. I went with a feedback amp using a 2N3904 in Class A.

With coffee brewed and with my Drake 2-B tuned to the very congenial DX-60 net (75 meters AM on Sunday mornings), I turned to the junk box. It was like meeting old friends! I pulled out parts that Michael, AA1TJ had sent me. I pulled out others that had been sent by Jim, AL7RV. I got out my box of isolation pads that Jerry Felts, NR5A had sent in. Soon the parts were glued and soldered to a board that already had an AF amplifier designed by Roger Hayward, KA7EXM and a PA that is my "Manhattan-ized" version of Tony Park's SDR rig PA. At the center of the board is little Colpitts oscillator that I took from a WSPR rig designed by Gene, W3PM -- earlier in the week Gene had posted a comment on this blog saying he was pleased to see my call on his WSPR screen. I wonder if Gene realized that he was seeing the signal from an oscillator from his design! The laptop was provided by a listener who prefers to remain anonymous -- thanks OM! Nearby, a copy of "Lid, Kid, Space Cadet" by Jeff K1NSS provided encouragement.

The rig passed the smoke test so I moved it over to the operating position and put it on the air. I got immediate gratification: the WSPRnet map right away showed my signal (now around 200 milliwatts) being received all round North America. You can watch this LIVE by going to http://wsprnet.org/drupal/wsprnet/map Just plug N2CQR into the "Call" box and hit UPDATE.

I know that WSPR is not everyone's cup of tea, but I like it. It was fun to build this rig. While WSPR is almost exclusively a mode that uses store-bought equipment, I get a kick out of being one of very few ops using a homebrew transceiver in this mode. (Are there any others?)

Next steps: I need to figure out how to set up automatic switching (by the computer) from transmit to receive. And I want to make some PSK-31 contacts with this rig.

Thanks to all who contributed!

73 Bill

Need audio reports for Podcast 128

How did 128 sound? I did drop off the lows, but I used the same filter I used in 127.

10% off on SolderSmoke The Book

Now through December 31. Use coupon code PEARTREE when checking out.

Saturn and Rhea

After a long spell of looking almost exclusively at Jupiter and our Moon, I was very pleased to see that Saturn is now visible. It is up in the south-east just before dawn, to the upper right of VERY bright Venus. The Sky and Telescope screen shot is a good representation of what I saw. I was using a 6 inch reflector telescope. I could see Titan very easily, and I could also see Rhea by using the averted vision trick.
Above is a much better view of Rhea. This one was taken by the Cassini spacecraft last November. Rhea has been in the news recently because scientists have discovered oxygen in its atmosphere:
http://www.astronomy.com/en/News-Observing/News/2010/11/Cassini%20reveals%20oxygen%20atmosphere%20of%20Saturn%20moon%20Rhea.aspx

Lynn Marsh, Boy Telegrapher, 1909

Note the steely-eyed look of determination and confidence. That's the same look that we see in the eyes of the 1925 radio builders (scroll down), and in the eyes of other knack victims.

Free Shipping on SolderSmoke -- The Book

Sorry, but this offer is for is U.S. only.

SolderSmoke 128 is out!

http://soldersmoke.com/soldersmoke128.mp3

3 December 2010
Visit to Wright Brother's Kitty Hawk site
Antenna work on Veterans' Day
W4HBK's Pensacola Snapper
"Knackers of the World Unite" (even in the UK!)
Sky and Telescope Jupiter moons program
Listen to a meteor ping!
DSB DC WSPR transceiver
Other ham books on Lulu
Ubuntu Karmic Koala's Skyrockets
Movie Review: "Social Network"
LTSpice under Wine (in Ubuntu)
Forrest Mims
Broken laptop -- need advice
MAILBAG
New puppy en route

I'll update the rss feed tomorrow.

MOJ goes QRSS

Mark W8MOJ (aka "MOJ") is the artist who created the latest SolderSmoke theme music. MOJ has recently gone QRSS with Slow Feld Hell. Above you can see the results as captured by W4HBK's grabber. Note that MOJ is giving HELL to the N2CQR shark fins!

Some SERIOUS young radio builders

No appliance operators in this bunch! Dave Lucas alerted me to Tom Glover's wonderful site:
http://www.gloveradio.blogspot.com/

Ham Radio on NPR

Mike: KC7IT sent in this very nice quote from National Public Radio:

NPR's On The Media has a sweet little reference to ham radio this week, in their report from a conference about Twitter. Listen to conference organizer Jeff Pulver, starting at 4:15:

BOB GARFIELD: .... sharing thoughts is something people do, fulfilling a primal human need for keeping in touch, even virtual touch, with other humans. Conference organizer, Jeff Pulver:

JEFF PULVER: When I was nine years old I was a very lonely person, and I – maybe I’m always lonely forever. But my - I went to my uncle’s office one day and he had this strange radio and he turned it on, and he says, “CQ, CQ, this is K2QQM calling CQ.”

And all of a sudden these squeaky voices started responding to my uncle. And I thought, this is pretty cool [LAUGHS], that these strangers are now talking to my uncle. And I became obsessed between the time I was nine to about twelve and a half. I taught myself Morse Code, electronic theory, I taught myself the rules and regulations all about amateur radio. In high school, junior high school, I would spend 40, 60 hours a week on the radio. And that was my lifeline. That was where I connected. And all I had to say is I was Jeff from New York, and it didn't matter how old I was, it didn't matter what I did for a living. I had this.

And now all these years later, 6 o'clock in the morning to 7 o'clock in the morning, every day, wherever I am in the world, I'm online. But instead of saying, CQ, CQ, I say, good morning. And a magical thing happens every day.

-------

That was me too, way back in junior high on 2 meter AM with my Heath Twoer. Turns out Jeff's still active too. Nice.

73 de KC7IT