Podcasting since 2005! Listen to Latest SolderSmoke

Friday, April 11, 2014

"That 70s Show": Steve "Snort Rosin" Smith Restores a 70's era Tuna Tin 2




Hi Bill,

Your recent stories about your TT-2 and original TT-2 "mojo transfer" prompted me to resurrect my TT-2 'resto' project. 

The attached photos show my 70s era TT-2 obtained for $5 from a QRP-L member.  This is how I received it and you can see that it's almost a duplicate copy of the original, complete with 'phenolic' substrate PC board material and hand-scrawled traces. 

I have collected most of the components necessary to convert it to a look-alike of Doug Demaw's 1976 item.  I already have 1 or 2 of the proper Radio Shack RF chokes but lack one more to have the complete set and I'm about to grab some original Radio Shack 276-1617 transistors.  The rest of the missing/incorrect parts I can drag out of the ever expansive Snort Rosin junque box. 

By hand selecting the two transistors for max. power gain I hope to eek 300 mW out of the thing.

Anyway, hope you enjoy the shots and I'll send more when it's finished.

73.......Steve Smith WB6TNL
          "Snort Rosin"




Our book: "SolderSmoke -- Global Adventures in Wireless Electronics" http://soldersmoke.com/book.htm Our coffee mugs, T-Shirts, bumper stickers: http://www.cafepress.com/SolderSmoke Our Book Store: http://astore.amazon.com/contracross-20

Tuesday, April 8, 2014

PY2OHH's New Super-Minimalist (11 Component!) QRPp Transceiver


Wow!   Check out the latest rig from PY2OHH, the Wizard of Sao Paulo,

http://py2ohh.w2c.com.br/trx/pititico/pititico.html


Our book: "SolderSmoke -- Global Adventures in Wireless Electronics" http://soldersmoke.com/book.htm Our coffee mugs, T-Shirts, bumper stickers: http://www.cafepress.com/SolderSmoke Our Book Store: http://astore.amazon.com/contracross-20

Pete Friedrichs' Amazing Books, Projects, and Guests


H.P. "Pete" Friedrichs is the author of two books that belong on our book shelves: "Voice of the Crystal" and "Instruments of Amplification." http://www.hpfriedrichs.com/mybooks/mybooks.htm

This morning I got a nice e-mail from Pete.  He's been listening to the podcast.

His e-mail caused me to revisit his web site.  Lots of minimalist homebrew gold there!

Check out the collection of projects sent to Pete from all around the world by readers of his books: 

http://www.hpfriedrichs.com/guestgallery/guestgallery.htm

Our book: "SolderSmoke -- Global Adventures in Wireless Electronics" http://soldersmoke.com/book.htm Our coffee mugs, T-Shirts, bumper stickers: http://www.cafepress.com/SolderSmoke Our Book Store: http://astore.amazon.com/contracross-20

Sunday, April 6, 2014

QRPp Model Planes


Michael, AA1TJ, alerted me to this very interesting hobby.  The video is really beautiful.

http://floatdocumentary.com/documentary

Our book: "SolderSmoke -- Global Adventures in Wireless Electronics" http://soldersmoke.com/book.htm Our coffee mugs, T-Shirts, bumper stickers: http://www.cafepress.com/SolderSmoke Our Book Store: http://astore.amazon.com/contracross-20

Saturday, April 5, 2014

Parachutist's Helmet-Camera Images Falling Meteorite



Just because it is pretty cool.  Also, we like parachutes, meteorites, and Norway.

Our book: "SolderSmoke -- Global Adventures in Wireless Electronics" http://soldersmoke.com/book.htm Our coffee mugs, T-Shirts, bumper stickers: http://www.cafepress.com/SolderSmoke Our Book Store: http://astore.amazon.com/contracross-20

Monday, March 31, 2014

SolderSmoke Podcast #159: Hamfests, Herring Aids, and Tuna Tins


 
SolderSmoke Podcast #159 is available.
 

http://soldersmoke.com/soldersmoke159.mp3

April 1, 2014
Vienna Wireless Hamfest
BITX Talk
W1REX speaks
Tuna Tin 2 Mojo Transfer Ceremony
After 38 years -- finishing my Herring Aid 5 receiver
Feedback, Phasing Dots, Rotational Sense, and Oscillation (or not)
Motorboating (when you don't want to)
Building my Tuna Tin 2 with parts from W1REX
On the air with Tuna Tin and Herring Aid
More Minimalist Meanderings:
An (Almost) All Altoid Crystal Radio!
Tek 465 dies (again) :-(
MAILBAG

Our book: "SolderSmoke -- Global Adventures in Wireless Electronics" http://soldersmoke.com/book.htm Our coffee mugs, T-Shirts, bumper stickers: http://www.cafepress.com/SolderSmoke Our Book Store: http://astore.amazon.com/contracross-20

Sunday, March 30, 2014

First Contact with Herring Aid 5 AND Tuna Tin 2


Ah, it was a good morning in the N2CQR shack!  Last week I ran into fellow ham David Cowhig at work.   I was regaling him with tales of Herring Aid and Tuna Tin derring-do.  Oh the stations I had heard with the receiver!  And the stations that I'd worked with the transmitter!   Then David asked the question: "Yea, but have you worked anybody with the receiver paired up with the transmitter?"  Uh, no.  Not yet. 
 
Well this morning I took care of that.  7040 kc.   1115 UTC.  W4ELP was calling CQ.  He wasn't too strong, and I wasn't sure if we were on the same side of zero beat (that's what happens with direct conversion -- you get all the sigs in two places on the dial) but I took a shot at it.  And he heard me! 
 
Here's the icing on the cake:  This was his SECOND QSO with my Tuna Tin 2!  Ed had been contact #4 when I was running the TT2 with the Drake 2B.   After exchanging reports he asked "Bill ARE YOU STILL ON THE TUNA TIN?" 
 
The rig (TX AND RX) is pictured above.   Close-up of the receiver appears below.  And below that is a picture of Ed, W4ELP, in his Georgia shack.  Note the HW-8.
 
Thanks Ed! Thanks David!
 






Our book: "SolderSmoke -- Global Adventures in Wireless Electronics" http://soldersmoke.com/book.htm Our coffee mugs, T-Shirts, bumper stickers: http://www.cafepress.com/SolderSmoke Our Book Store: http://astore.amazon.com/contracross-20

Saturday, March 29, 2014

Harv's DDS Function Generator


Nice looking DDS function generator Harv!  Glad to see the HT-37 in the background. (And it appears well protected -- is that some sort of digital shielding to protect it from the bits and bytes?) The eraser buttons are a nice touch. Good luck with the Minima!

Hi Bill,
 
Well I have nearly completed my DDS Function Generator as I prepare to construct the Minima.
 
The Function Generator was a necessity for the bench so I can tackle Tweaking and Troubleshooting my work.
It is housed an aluminum box and completely self-contained.
My objective was to have the choice, to either lay the unit flat on the work surface or stand it on a shelf for easy reading while seated.
The Generator has both a  DDS and HF-ECG output.
The buttons are fashioned from White Pencil Erasers since finding proper buttons for the membrane keypad beneath was difficult.
 
I have obtained a set of Farhan’s Boards for the Minima but will begin my effort with a Manhattan Style Construction so I can perfect my choice of parts.
The soldering iron is heating and I’m ready for a new and exciting challenge.
 
Happy Solder Melting Everyone!
 
Harv -=WA3EIB=-
Albq., NM.


Our book: "SolderSmoke -- Global Adventures in Wireless Electronics" http://soldersmoke.com/book.htm Our coffee mugs, T-Shirts, bumper stickers: http://www.cafepress.com/SolderSmoke Our Book Store: http://astore.amazon.com/contracross-20

Thursday, March 27, 2014

Remotely Controlled Stations on the Internet

Now for something completely different!  

I  find myself talking fairly often to hams who are using remote transceivers.  The operator will be in say, Michigan, with the rig in Florida.  Some of them are using the online system:

http://www.remotehams.com/

I signed up and downloaded the software.   It works very well.  Many of the stations are closed to outsiders, and some of them don't let you transmit, but it is fun to listen from remote locations.

This morning I hooked up the Tuna Tin 2 and was able to hear my 200 mW signal through AI4W's receiver in Kentucky. 

Our book: "SolderSmoke -- Global Adventures in Wireless Electronics" http://soldersmoke.com/book.htm Our coffee mugs, T-Shirts, bumper stickers: http://www.cafepress.com/SolderSmoke Our Book Store: http://astore.amazon.com/contracross-20

Tuesday, March 25, 2014

Designer: Douglas Bowman | Dimodifikasi oleh Abdul Munir Original Posting Rounders 3 Column