We’re a garage band, we come from garageland
-
Hi, FastRadioBurst 23 here letting you know of a couple of our shows this
week. On Sunday 28th April 2024 at 0900/1300 hrs UTC on 6160 kHz and then
at 2000...
6 hours ago
A word of caution regarding backlight power connections: Not all LCDs have on-board current limiting for the backlight LED(s). Some are wired directly to the anode and cathode of the LED(s). Connecting +5V as shown in this video may well destroy the backlight. Following the traces from the connector to the LED(s) is usually easy and will tell you if you do or do not need an external current limiting resistor.
ReplyDelete