A Great Story about the Benefits of Repairing Old Gear -- The Bremerton Typewriter Company

Listen to this in its audio form.  Maybe follow along with the (type?)written text.  Enjoy the pictures and the videos and -- above all -- the message.  

This wonderful article has a lot to say about the value of repairing -- and knowing how to repair -- old gear.  Not just typewriters, althought that is very cool.  But this article also pertains to old boatanchor ham gear, and to the skills needed to homebrew rigs today. And it says a lot about mentorship. 

I really liked this story.

 https://www.nytimes.com/interactive/2025/11/20/us/typewriter-repair-seattle-bremerton.html?unlocked_article_code=1.208.N367.53DGZGZ8oPIm&smid=url-share

How VU2RM Got Into the Satellites

 

Readers will remember last week's post about the homebrew rivalry between VU2RM and VU2NR. (Note the bio about VU2RM below).  This morning Farhan sent me this article from a 1970s-era Indian ham radio magazine in which VU2RM describes his early efforts to get onto the satellites. I also tried during the mid 1970s, but I didn't have the kind of magic decoder ring provided (via QSL!)  by OH2RK.  My satellite success had to wait some 20 years, until I was in the Dominican Republic.  More on this below the VU2RM article. 

This morning I replied to Farhan's email:  

Very cool Farhan.  I see that Pete may have an Indian rival for "most SSB transceivers built."  

I got into the satellites during my 1992-1996 stay in the Dominican Republic.   At first, we had no way to get the up-to-date Keplerian elements to predict satellite passes.  Then Compuserve opened up. I had to telephone Miami from the DR to get the Keps.  I ran up a huge phone bill. 

I too built an antenna for these contacts.  Mine was the 2 meter portion of a 144/440 MHz project from 73 magazine called "The Ray-Gun".  I built mine out of scrap lumber and refrigerator tubing.  I still have these elements!  I used them in the beam that I built to listen for YOUR satellite!   In the DR, elevated the thing by 45 degrees and pointed it in the general direction of the satellite.  

RS-11 had a very cool robot aboard.  If you called it just right, it would issue you a serial number.  I have the QSL.

Here are some articles about our satellite adventures.  

https://www.gadgeteer.us/ASTRO.HTM

BTW, Luis Ernesto HI8LEZ visited me during summer 2024 in the DR! 

My hombrew 2 meter beam in the Dominican Republic

Internet Archive / Wayback Machine in an Old Church in San Francisco

 

Three cheers for the Internet Archive!  Among its millions or trillions of things saved, there is the SolderSmoke podcast and blog.  

Check out the CNN video: 

https://www.cnn.com/2025/11/16/business/video/internet-archive-wayback-machine-church-digvid

HAARP Test 17 -- 22 November 2025

 

Details here (click on November 2025): https://haarp.gi.alaska.edu/transmissions

Submit signal reports here:  https://haarp.gi.alaska.edu/form/reception-reports

Early SSB in India: Espionage, Stolen Secrets, and Kleptomania

 

Earlier this month I had stumbled across a 1964 QST article entitled "A Sideband Transceiver, VU2 Style."  I forwarded the link to Pete N6QW, Grayson KJ7UM, and to Farhan VU2ESE.  Last night Farhan sent me this insider look at early SSB in India.  It is really great.  The battle for preeminence among early SSB homebrewers in India reminds me a bit of Jean Shepherd's descriptions of homebrew radio in Hammond, Indiana.   Farhan's description of the early rigs being "all over the place, in about 3 or 4 boxes... with a whole lot of  wires running all over"  really resonated with me -- yes, even today, that is true homebrew. Thank you Farhan for sharing this with us. 

Farhan writes: 

VU2NR, Raju was a legend! Quirky, brilliant and liked to be by himself. He lived to a very old age of 100 or so. He was the first ham to get on SSB from India. Therein hangs a story of espionage, stolen secrets, cold war, politics and kleptomania. Most of the actors are now dead, so it can be told now.

I never met VU2NR, he rarely travelled. One evening at Paddy's shack, I was shooting the breeze with VU2RM, Ram, about my own SSB efforts. Ram was probably the most knowledgeable ham on SSB in India and his RM96 was widely duplicated. Paddy and Ram were trying to empty out a bottle of the Old Monk and I casually mentioned how we had to scrounge around for SSB lattice filters until Wes showed us how to build them ourselves. At that point, Ram unloaded this story to us:

VU2NR joined the Allies and worked as a radio mechanic with the RAF. After the war, he joined the ICAO (International Civil Aviation Organization) and then finally the United Nations as a comms expert, he was in Aden for a while. He understood the radios well and he became a well known homebrewer. His most brilliant work was the NR60 (it is an SSB radio built around four CA3028 kind of mixers). It was the first SSB radio that I had built (and it worked!) but we are getting ahead of ourselves.

Back in the 50s, ham shacks of India consisted of World War II surplus receivers and a self-built 807 transmitter driven by a VFO. There was a fair amount of buzz on the bands about SSB. The hams could occasionally pick up DX that was on SSB and easily resolved by the BC-348s  and the HROs but there was no way to build one. The QST was difficult to get your hands on but Raju had become a subscriber of the QST during his RAF days.

A QST sailed on a slow boat from the USA and landed up at the port on the east coast of India, Vizag and made its way to Raju's doorstep. Over weeks, he gathered parts and in the summer of 1955 he quietly came on 40 meters on SSB! This blew everyone away. Until now, one had only heard stories of SSB transmitters told by sailors of Sandra Maria Gracia after a few drinks to a bunch of hams clutching onto their 807s. It was as if Jesus had materialized!

VU2RM, Ram was not amused. He was a homebrewer with pride and honour. He could never be bested. He spent the next evening tuning on Raju's SSB up and down to note that the other sideband was missing and the carrier was gone. It sank into him that Raju had indeed beaten him to SSB. Ram worked at the Kakinada port, about 100 miles further down south on the east coast as the port radio engineer. He didn't sleep well. At 5 am, he got up, walked out and took a bus to Vizag where Raju lived. He was at Raju's door at 9 am. Raju was amused at the young guy and invited him in. They knew each other as rival homebrewers. There was tension in the air. Raju showed off his SSB transmitter in the front hall of his home. It was all over the place in about 3 or 4 boxes. There was the power supply, the PA, the ssb generator using a 2Q4 (a passive RC phasing network), a separate VFO box and a whole lot with wires running all over. In a corner was his stack of QSTs.

Raju's XYL called out for coffee and snacks (called 'Tiffin' in south Indian English) and Raju sauntered off to the kitchen to fetch his celebratory feast...

With alacrity and swiftness that only comes once in a lifetime, Ram, VU2RM, sprang to action. He darted to the QST collections, quickly found the one with the SSB transmitter on the cover, turned the pages to discover VU2NR's dog eared pages. He was staring at the circuit trying to memorize it. He realized that 2Q4's internal diagram had really odd values that he could never remember. So he did what James Bond, Bertie Wooster and Louvre thieves would have done. He rolled it up and slipped it into his pocket! (In those days, QST could be rolled and slipped into your trouser pockets, leading to wider dissemination of knowledge). He called out to Raju asking him to forget the refreshments as his bus was due back home. He legged it out and didn't stop until the bus stop. He hid around the bus yard hoping to not be caught by Raju. In the meantime, Raju, cursing the young upstart, drank both the filter coffee cups and left for work. Raju was unaware that the royal jewels were stolen.

VU2RM, Ram, started to work on his SSB radio over the next few days. He stopped going to work. At first, he figured out how to null the carrier using a twin triode modulator. Next, he fabricated the 2Q4 circuit. He sand papered lower value resistors until they read as close to the value as he could manage on his analog volt-ohm meter. He gave up on the exact capacitances and just soldered a bunch of the closest together. He had a crude 2Q4 equivalent. This, he dropped into his rat next circuit and an 'Almost' SSB signal emerged. He was probably having a sideband suppression of less than 15 dB at this point. It was suppressed and the carrier was nulled. He declared victory.

In the morning, Ram was on the band strutting off his SSB transmitter to the local gang. Graciously accepting the accolades from his fan club and extolling virtues of life on SSB to the lesser mortals. The news quickly spread over CW and AM of VU2RM as the second SSB station from India.

In the meantime, the atmosphere at VU2NR was tense. You could cut the air with a toggle switch. Raju had no idea how Ram had gotten the SSB. He carefully tuned around on his signal. He could pick up faint traces of the opposite sideband. Ram's carrier was also leaky. He decided that Ram was probably passing off his AM transmitter as a SSB. He said as much on air to his own devotees. Ram, ever watchful of his own reputation, heard this criticism and broke in, challenging Raju to prove that his was indeed not SSB. Raju's reaction was mixed. Now he wasn't sure. 

It was now Raju's turn to have a sleepless night. After his breakfast, he had had enough of confusion and he hauled his old scope and himself into the 8 am bus to Kakinada and showed up at Ram's doorstep! "Show me your radio" he said crisply.

For Ram it was his moment of crowning glory. He had brought Raju down to his shack! Raju plugged his scope into Ram's transmitter. He sniffed around the transmitter which was laid all over the table. "Where is your 2Q4?" he asked. Ram pointed to bunch of resistors and capacitors and Raju realized Ram's dog headed brilliance. He sat down, traced to the balancing pots (there would be two of them as this was a phasing transmitter). At this time, he decided to show Ram his greater prowess. He reached out to the carrier nulling pots, and tweaked them to minimum carrier (Ram was watching the oscilloscope with his mouth wide open). He told Ram that he had now fixed the carrier and then showed him how to adjust the RF phasing control for minimum by tuning to the opposite sideband on Ram's Bc 348. Having proved to Ram that he was a better homebrewer, he declared that now, Ram's transmitter was indeed SSB and not semi-AM. Raju retrieved his honor by being gracious and "mentoring" Ram.

 

They had coffee and snacks and it was time for Raju to leave, as Ram was showing Raju to the door, Raju's eye caught a QST on the shelf... he pulled it out and stared down at the QST with his own address neatly stickered on the QST's cover. He glared at Ram for a long time and turned away and left in a huff. Ram called after him down the street but Raju was gone.

VU2NR's last radio was built when he turned 90. It was the NR90 and it was built using NE612 chips. His hamming came to an abrupt end when one day his son dropped in unannounced only to find him perched on his tower of 30 feet height, fixing a fallen element of his self-made log periodic. The son was so horrified that he took away all the radios to save him from self-harm (this part of the story is unconfirmed).

 

My friend Sasi, VU2XZ, was close to him and he got the family to donate his callsign to a repeater that has been established in his memory. VU2NR lives on.

- f 

------------------------

Here is the link to the 1964 QST article.   VU2NR's article appears on page 19: 

https://www.worldradiohistory.com/INTERNATIONAL/QST/QST-1964-03.pdf

SolderSmoke Podcast 262: Hybrid Wireless, 100 Watt Amplifier, Antipode VK6, Tropo DR to PR?, Mixers, MAILBAG

SolderSmoke Podcast #262 is available: 

Audio only: http://soldersmoke.com/soldersmoke262.mp3

Video:  https://www.youtube.com/watch?v=QSUyE4IaHFw&t=61s 

Intro: 

-- We are over 100 on the Direct Conversion Receiver Builds.  We talked about the receiver project at the GQRP convention.  Video on the blog.

-- G4 Geomagnetic storm November 11-12.  Messed up my computer.  Blackout in the DR?  

Pete: 

-- USMC Birthday. Having served alongside them they have my deepest respect. Veterans Day. 

-- Think about supporting those without a job this Thanksgiving. Cash to various organizations is best.

 -- 50 Hz off frequency -- What does that mean if you tune by ear and not by mouse/waterfall?

--  The Hybrid Wireless is on the air. A unique build and not often seen.

Dean:  

-- Progress on the HOMEBREW MOSFET amplifier.  Claude helped. 

Dean's 100 watt amplifier

SHAMELESS COMMERCE DIVISION:  Mostly DIY RF.   Become a SolderSmoke Patron.  Buy stuff from Amazon through the link on this blog (in the right side column). 

Bill:  

Bill's antipode from Virginia

-- VK early in the morning.  Also E51MWA and FW5K.  All homebrew SSB. My antipodes. VK6ACF Charley 11,629 miles.  Might be my most distant station worked. 

-- Preping for VHF in HI7.  Can I kerchunk Boricua repeaters with Tropo?  See: https://soldersmoke.blogspot.com/2025/09/puerto-rico-dominican-republic-tropo-on.html

-- Bill's mixer obsession. Grayson's HSD Chapter 12. The importance of knowing "the paticular go of it." EMRFD Chapter 5. 

-- The new look for the SolderSmoke blog. 

MAILBAG:  

-- Todd VE7BPO -- Doing well. 

-- Grayson KJ7UM on the loss of Jim Tonne W4ENE.  Gone, but through his writting, continuing to contribute.See: https://web.archive.org/web/20220429224036/http://tonnesoftware.com/appnotes/demodulator/EnvelopeDemodulators.pdf

-- Camden is a 23 year-old blind ham who is looking for some homebrew help. He lives in Pleasant City, Ohio, about an hour east of Columbus.  Can you help him? camden@bopp.net

-- Dale Parfitt into the QRP Hall of Fame!  The Radio Gods Approve! 

-- Paul VK3HN -- Bricolage, Cacharreo, Artilugio, and Jugaad.  SA612 going obsolete. 

-- Mike WN2A Mixers and all that. Tropo.  "Greetings from the National Radio Noisy Zone!" (NJ) 

-- Peter Marks VK3TPM -- SolderSmoke template help -- Digital HF Voice

-- Walter KA4KXX -- A great book by L.B. Cebik

-- Bob KD4EBM  -- The Bob Pease Analog Troubleshooting book. Pease quote: "My favorite programming language is solder," 

-- Cor PA3COR  Difference between mixers and adders

-- Mike WA3O  I still have his HW-7.  Amazing water-cooled amplifier.   VK3MO.  

-- Samuele IU2QBW     An Italian Homebrewer  https://soldersmoke.blogspot.com/2025/10/a-wonderful-homebrew-direct-conversion.html

-- Pil Joo VA3GPJ  Experimenting with TIA amps. 

-- Farhan VU2ESE -- USB and LSB LC filters -- Applicable for crystal filters too? 

-- Rogier PA1ZZ Thanks for the great videos! 

-- Captain Mike  KX4WC   Aeronautical Mobile --Santiago, Chile to Panama!  With Mike WA3O and Ian VK3MO:  https://soldersmoke.blogspot.com/2025/11/vk3mo-and-wa3o-brotherhood-of-ham-radio.html 

-- Dave AA7EE  A completely AI SolderSmoke? "Open the pod bay doors Hal." 

-- Pat W3RGA heard my 1 watt HI7 beacon.  Thanks Pat. 

-- Patrick Voets -- A Belgian living in the Netherlands -- supports our defiant NIMCEL position! 

-- Brian "Moses" Hall K8TIY, Father of Robert of "Crank it in Robert" fame.  Check out the video.  Young Robert appears around the 45 minute point:  https://youtu.be/Xqs2Ihucr6I?t=2730

-- Will Harris KI4POV -- an esteemed homebrewer -- asks about using 75 ohm coax. I say yes, Pete tells him how to do it right. 

SolderSmoke Homebrew Direct Conversion Receiver Hall of Fame Update: 97 Completed + 7 Honorable Mentions: Total Receivers Built: 104 (As of November 10, 2025, 2018Z)

 Please let us know if you spot any errors, or if we have inadvertently missed anyone.  Don't worry about being late to the game -- the challenge continues.  All of the info is still available (see below). 

As of November 10, 2025 2018Z:

So far 97 completed receivers, and 7 honorable mentions.  Total Count:  104.       Receivers built in 17 countries.   

NE3U (KY4EOD)  Matt 

KQ4AOP       First ham signals ever heard! 

N9TD             Derek

AC3NG          Ryan

VK3TPM       Peter Marks  

W4KAC         Ken 

W4KAC         Ken built a second one! 

N2EPE           Erik

VA3NCA        Wayde    

KI5SRY          Mark -- Gears on PTO screw

 

KA1MUQ       Frying pan receiver

AA1N              Adam

ZL1AUN         Aaron -- Using SSB transmitter -- New Zealand

W8UC             Never before homebrewed. 

VK4PG           Phil -- Nice case, "really pleased"

G7LQX           Working well, video of CW and SSB.  -- England

KE2AMP        John     Spring on PTO screw -- great

N9SZ              Steve  nice receiver

KD9NHZ        Piotr  Nice one

KE8ICE          Calvin, Very cool receiver. 

 

WV3V              Jayson!  Got it done!

GM5JDG         Martin.   -- Scotland 

KF8BOG          Jim:  A long struggle, but success.  

Chris Wales    Fantastic video.  -- Wales

YD9BAX         Wayan! Homebrew transformer!  Indonesia

N0NQD         Jeff 

WN3F              Roy -- Made new stickers! 

AB5XQ            Bill  

KB7ZUT          Andy  

AA1OF            Jer

VictorKees        Holland

KC9OJV           John -- Manhattan-style convert

WZ5M              1, 2 or maybe even 3 receivers!

K1KJW             Jim in Vermont

KC5DI              Dallas -- friend of WZ5M

Gary                 Australian -- Wooden PTO form

LU2VJM          Juan in Argentina  -- Argentina

K1OA               Scott "Most fun in 50 years"

KC9DLM         Ben -- Had EFHW problems

PH2LB             Lex  Yellow, Glue Stick -- Netherlands

AI6WR             David

G6GEV            Dave (It was a blast!) 

KC1ONM        Wayne  MakerLabs NH

KB1OIQ          Andy    MakerLabs NH

KA1PQK         Jay       MakerLabs NH

W1TKO           Mike    MakerLabs NH

K5KHK            Karl

SM0TPW         Mikael  -- Sweden

KI7LKB           Brian (coat hanger tube)

M6CRD            Chris

W2DAB           Dave in NYC

W4JYK            Wes of VWS

KA4CDN          Mike of VWS

M7EFO             Adrian 

VK5RC             Rob

KD8KHP          Dave

VK1CHW         Chris

KA0PHJ           Brian

W0IT                Louis

W1PJE             Phil

W2AEW           Alan

KN6FVK          John (Barkhausen-Be-Gone Spray) 

VU2JXN           Ramakrishnan -- India

AA0MS            Doug 

9V1/KM7ABZ   Paul  --  Singapore

VK2BLQ          Stephen -- Australia

N3FJZ              Rick

Daniel               VE5DLD  -- Canada

Student 1          Student of VE5DLD

Student 2          Student of VE5DLD

Student 3         Student of VE5DLD

K7WXW          Bill 

NK3H               Mitch

KN4ZXG         Ted

WA1MAC        Paul

N4AVC             Chuck 

K3IY                 Kevin

N6ASD             Ashish in Bangalore

W1DSP             Rick

WD4CFN         Steve

KM5Z             Mike

KF5DAN         Dan

Fritz                 Fritz

N9OK              Joe

WA5DSS         Bill 

K0GDB           Grant

G0JNR            Shane Glow-in-Dark Coil Form

KK7BCO        Tobias

K2BVR            Bob

Robert              Sutton

K5YFO           Dave (Texas) 

KD4PBJ          Chris

KN4GAH        Chris -- EE perspective

F1GMA           Philippe  -- France

W2TEF            Todd

EI9ITB            Karl  -- Ireland

VU2TUM         Puneit Singh

-------------------------

Honorable Mentions: 

*AA7U            Steve No PTO

*VK7IAN        Ian -- No Manhattan boards -- Tasmania

*KC1FSZ        Bruce's build on a PC board

*CT7AXD       Graham -- different AF amp -- Portugal

* DL1AJG      Andreas -- Germany

* Matthew      Student of DL1AJG

* Arash           Student of DL1AJG 

-----------------------------------------

Candidates for the Hall of Fame: 

SA5RJS              Rasmus

KA9TII               James

AA7FO              Chuck 

VA3ZOT           Tony  Surface Mount -- Honorable Mention? 

AB2XT             John (Done, just need the video)

KO7M              Jeff (Piper Cub)

For more information on how you too can build the receiver: 

Join the discussion - SolderSmoke Discord Server:

https://discord.gg/Fu6B7yGxx2

 

Documentation on Hackaday:

https://hackaday.io/project/190327-high-schoolers-build-a-radio-receiver

 

SolderSmoke YouTube channel:

https://www.youtube.com/@soldersmoke

Puneit Singh VU2TUM's FB Homebrew 40 meter SolderSmoke Direct Conversion Receiver

It was really good to see Puneit Singh finish this receiver project.  He overcame many difficulties, including a lot of travel and an acute shortage of time, but he got it done. Congratulations Puneit Singh and welcome to the Hall of Fame. 

Puneit is also a CW man -- we hope he pairs this receiver up with a simple CW transmitter and makes some "fully homebrew" contacts. 

 

A Visit to the U.S. National Radio Astronomy Observatory (and the surrounding Quiet Zone)

Because my kids went to college in the Shenandoah Valley of Virginia, I sometimes found myself asking Google Maps how long it would take to get to the radio astronomy observatory at Green Bank, West Virginia.  It looked close on the map, but as these two guys found out, it really was quite far away.  So we never made the trip.  I am glad that these guys did. See the video above. 

Look, I am a former member of the SARA, the Society of Amateur Radio Astronomers.  I am a huge fan of the Parkes Radio Telescope in Australia, the focal point (!) of the movie "The Dish."   I also have on my shelf the book, "Big Ear Two -- Listening for Other Worlds" by John Kraus W8JK:  

https://en.wikipedia.org/wiki/John_D._Kraus.  I am really interested in this stuff.  

This video was a really nice look at the observatory and at the surrounding area.  I may have to try again to get out there: 

https://en.wikipedia.org/wiki/National_Radio_Astronomy_Observatory

 

VK3MO and WA3O - The Brotherhood of Ham Radio

Ian VK3MO and his daughter Rachel in 2006

I have known Mike WA3O for many years -- he sent me his HW-7 QRP transceiver, which I proudly display in my shack.  I have also had several contacts with VK3MO, going back to at least 2002.  I ran into both of them on 20 meters from the Dominican Republic on September 2, 2025 when KX4WC/AM was flying from Chile to Panama.  This was a very cool contact.   WA3O made it even cooler by sending this email about his connection to Ian VK3MO.  Mike writes:    

On another note. VK3MO . I heard Ian talking one afternoon about Pittsburgh. After he cleared with his QSO I called him and asked about it and he said his daughter was visiting Pittsburgh to check out a university (Duquesne). So I gave him my email and phone number in case anything should arise. We met up with his daughter and took her to dinner and she and my wife went to Niagra Falls. About a year after that his daughter went to that university and on many occasions we got together for a meal and to hang out.

 Ian and his wife did come to visit and we got to meet them . I also kept a morning 40 meter schedule with Ian every day.  Ian has STACKED ROMBIC antennas (one at 140 ft and one at 70 ft) so he was a massive signal most days. Ian was very grateful to have us available, just in case.

  His daughter is an accomplished violinist and got us tickets to the opera where she was in the orchestra. 

  Then Covid hit and she was just finishing finals so, we packed her up and got her to the airport before they closed the Australian boarders.

 

All from the brotherhood of ham radio.

73's  Mike WA3O 

VK3MO's 20 meter monoband array w 200 foot rotating tower

He also has STACKED RHOMBICS for 40 meters 

WA3O's Water-Cooled 1.3 kW amp using MOSFETS

More pictures at https://www.qrz.com/db/WA3O

Jim Tonne -- W4ENE -- SK -- Does anyone have his 2012 Envelope Demodulator Article?

 

Some sad new arrived this morning via QRZ.com and the AM Window:   Jim Tonne W4ENE has passed away: 

https://www.legacy.com/us/obituaries/name/james-tonne-obituary?id=59587279

https://forums.qrz.com/index.php?threads/jim-tonne-w4ene-sk.969255/

Jim was a prolific software developer for radio amateurs.  He was the source of the Elsie program used by so many of us. 

I had a very useful e-mail exchange with Jim in 2022 about envelope detectors.  Much of the exchange was about a 2012 article that Jim wrote on this subject.  I was looking for it just today.  Unfortunately Jim's software business (and his websites) are all apparently tied up with the executor.  I can't access them. 

Does anyone out there have a downloaded copy of Jim's 2012 article on Envelope Demodulators that they could send to me? 

http://www.tonnesoftware.com/appnotes/demodulator/EnvelopeDemodulators.pdf

It is a tribute to the contributions made by a radio amateur that even after his passing people are scrambling to find his articles and his software.   Condolences to Jim's family. 

Another GREAT Book -- L.B. Cebik, W4RNL's "Seven Steps to Designing your Own Ham Equipment" - 1979 - FREE!

Thanks to Walter KA4KXX for alerting us to this gem of a book.  L.B. Cebik is best known as an antenna guru.  I did not know that he also did a book on the homebrewing of rigs.  

Here is the URL: https://archive.org/details/sevenstepstodesi0000cebi/page/n2/mode/1up  Just click on the "borrow" box and you can look at the whole thing.  Thanks too to the Internet Archive for preserving this important piece of ham literature. 

I was a bit apprehensive when I saw "designing" in the title.  We have talked about how, all too often, modern hams seem to challenge the homebrew nature of our rigs by asking if we had "designed" it ourself.  "Well," I answer,  "I did not invent the Colpitts oscillator, nor the common emitter amplifier, nor the superheterodyne receiver... But I did build this rig myself."  I worried that OM Cebik might have been plunging us into this design debate way back in 1979.  

But no need for worry.  His definition of "design" is quite expansive:  

I have not read the whole thing yet.  I hope that others will go through it and highlight for the group the parts that they find to be the best.  Please put your thoughts in the comments section below. 

Thanks again Walter.