Podcasting since 2005! Listen to our latest pocast here:

Podcasting since 2005! Listen to Latest SolderSmoke

Wednesday, November 19, 2025

How VU2RM Got Into the Satellites

 

Readers will remember last week's post about the homebrew rivalry between VU2RM and VU2NR. (Note the bio about VU2RM below).  This morning Farhan sent me this article from a 1970s-era Indian ham radio magazine in which VU2RM describes his early efforts to get onto the satellites. I also tried during the mid 1970s, but I didn't have the kind of magic decoder ring provided (via QSL!)  by OH2RK.  My satellite success had to wait some 20 years, until I was in the Dominican Republic.  More on this below the VU2RM article. 


This morning I replied to Farhan's email:  

Very cool Farhan.  I see that Pete may have an Indian rival for "most SSB transceivers built."  

I got into the satellites during my 1992-1996 stay in the Dominican Republic.   At first, we had no way to get the up-to-date Keplerian elements to predict satellite passes.  Then Compuserve opened up. I had to telephone Miami from the DR to get the Keps.  I ran up a huge phone bill. 

I too built an antenna for these contacts.  Mine was the 2 meter portion of a 144/440 MHz project from 73 magazine called "The Ray-Gun".  I built mine out of scrap lumber and refrigerator tubing.  I still have these elements!  I used them in the beam that I built to listen for YOUR satellite!   In the DR, elevated the thing by 45 degrees and pointed it in the general direction of the satellite.  

RS-11 had a very cool robot aboard.  If you called it just right, it would issue you a serial number.  I have the QSL.

Here are some articles about our satellite adventures.  


BTW, Luis Ernesto HI8LEZ visited me during summer 2024 in the DR! 

My hombrew 2 meter beam in the Dominican Republic



No comments:

Post a Comment