George, KB3ODH, found this about 1/2 mile from the Cape Hatteras Lighthouse.
Thanks for all the suggestions on the bike radio. I googled around a bit and found a schematic that seems very similar to the little receiver I'm working with. I almost certainly would be better off starting anew (perhaps keeping the AF circuitry). But it is interesting to see how a simple AM receiver works. That first transistor is an autodyne circuit -- both a mixer and a oscillator.
As I mentioned on the podcast, I've been riding my bike to work lately. I really enjoy it. We have great bike trails in this area. They use paths of defunct railroad lines -- I ride Washington and Old Dominion Trail.
So I was sitting in the shack yesterday morning, drinking coffee and listening to IGY by Donald Fagen on Pandora, when I heard what I thought was an alarm. I thought it might have been a smoke detector going off (always a real possibility in the N2CQR shack!). It took me a moment to realize that what I was hearing was the device pictured above. I'd left my 2 meter HT tuned to 145.950 MHz, and Arissat-1 was breaking squelch with SSTV tones. Very cool.
Billy alerted me to Pandora. Very cool. You just give it an indication of the kind of music you'd like to listen to. They do the rest. I started out with Creedance Clearwater Revival, and Pandora proceeded to send me a stream of sort-of similar rock. Streaming audio through the web. And it is apparently all legal (you listen to a commercial every once in a while). This is great for background music in the shack. After all, you can only listen to so much SolderSmoke, and 75 meter SSB chatter is not good for you. I'm not sure if it is available outside the USA. I hope it is.
Our book: "SolderSmoke -- Global Adventures in Wireless Electronics"http://soldersmoke.com/book.htmOur coffee mugs, T-Shirts, bumper stickers: http://www.cafepress.com/SolderSmokeOur Book Store: http://astore.amazon.com/contracross-20
In the last podcast I played a recording of some 2 meter signals picked up by my handheld transceiver from the new amateur radio satellite ArisSat-1. Included in the transmission were some tones that were obviously SSTV. Mike, K2MTS, ran the audio through some SSTV software and got this! Pretty good! From space to my HT, across the room to the SolderSmoke mic, out over the internet in podcast form, back to me in an e-mail, and now, on the blog. Thanks Mike!
http://soldersmoke.com/soldersmoke136.mp3
Eddie, KC4LVV, alerted me to the web pages of Nick, KC9KEP. What beautiful craftsmanship! Inspirational stuff! Check out the homebrew capacitors. And the coils! And the coil winder. It's almost too much!
An e-mail exchange on QRP-L this morning about using ceramic resonators in 455 kHz filter circuits (great idea Grayson!) led me to the ham radio corner of the PAR electronics web site. PAR is the company run by Dale Parfitt, W4OP. 
A stiff wind and occasional drizzle did not put off the large attendance of QRP and home building enthusiasts who attended QRP in the Country on July 17th. Hundreds of people from all over England and Holland found their way to Upton Bridge Farm, Somerset where the farm barns provided cover. About 25 stalls and displays showed off or sold everything from components to large construction projects. Apart from a few traders selling components, most displays were from Clubs publicising their activities or of ancient domestic and wartime radios, with a few individuals selling items to make space for new projects! There were also practical construction projects to be seen as ‘students’ built their Cary RXs with occasional help from the Bath Buildathon team led by Steve G0FUW. The catering team led by Tony G0GFL cooked a prodigious amount of special local burgers and sausages from the host Tim G3PCJ’s farm served in rolls baked locally that very morning, and washed down by village beer and cider, under the careful eye of Robert PA9RZ!A raffle raised £200 for those suffering in East Africa; the main prize being a year’s subscription to PW kindly donated by Rob G3XFD which was won by Graham G4DPH. George G3RJV was asked to select a couple of displays that ‘appealed’ to him for two other prizes. The GQRP Club had kindly donated a special edition of Drew VK3XU’s latest project book which was also won by G4DPH for his PW Sprat project; a Walford Electronics Radlet CW TCVR kit went to Colin G3YHU for his valved superhet. A years subscription to BYLARA was won by SWL Mike Jones who is about to take his Foundation licence course.
After the event Tim G3PCJ said he was said delighted with the increased attendance and wished to thank everybody whose hard work had made the event so successful. He urged all Clubs within reasonable distance to plan their displays for next year! Watch the press for announcements of the date!
Proprietor Tim Walford BSc MIEE CEng G3PCJ
Posts
All Comments
Posts
All Comments
