Podcasting since 2005! Listen to Latest SolderSmoke

Sunday, December 4, 2011

SolderSmoke Podcast #139

December 3, 2011

http://soldersmoke.com/soldersmoke139.mp3

Halloween, Thanksgiving, and Billy's Birthday (on the range!)


Astro-Knack: CCD camera in the telescope. Solar astronomy.


Winter approaches: Shack heating by Heath, Halli, Hammarlund and Drake.


2B troubles on 17 meters.


Rig Re-Cycling: Rebuilding 17 meter rigs from the last solar cycle.


Azores DSB re-build: Oscillator troubles then adding a JBOT.


Manhattan style construction and the need for urban renewal.


Book Review: Steve Jobs. (Woz has the Knack!)


MAILBAG


Our book: "SolderSmoke -- Global Adventures in Wireless
Electronics"
http://soldersmoke.com/book.htmOur coffee mugs, T-Shirts, bumper stickers: http://www.cafepress.com/SolderSmokeOur Book Store: http://astore.amazon.com/contracross-20

Friday, December 2, 2011

An Inspirational Homebrew Motor from Spain


Bruce, KK0S, alerted me to this inspirational masterpiece from Spain. It is, as he points out, one of a number of really great videos about top level homebrew craftsmanship from Europe (remember the French homebrew tubes?).

Other comments from Bruce:
Did you notice that the calipers and micrometer this guy was using were seriously old-school. Totally manual readout. Not even a dial on that set of calipers! On top of that, his little lathe was manually fed. Notice in one of the shots, he is shown turning the cross slide feed wheel. No CNC anywhere. I can't be positive, but I don't think the lathe had a digital position readout either. This man is a machinist in the truest sense of the word. The Knack not only lives - it thrives!

Our book: "SolderSmoke -- Global Adventures in Wireless Electronics"http://soldersmoke.com/book.htmOur coffee mugs, T-Shirts, bumper stickers: http://www.cafepress.com/SolderSmokeOur Book Store: http://astore.amazon.com/contracross-20

Thursday, December 1, 2011

Secret Listeners -- The Voluntary Interceptors

Jim, AL7RV, and several others sent me the link to this really interesting video about the British radio amateurs in WWII. Real "stiff upper lip" spirit in this video. Musn't grumble! Great stuff from Great Britain: http://www.eafa.org.uk/catalogue/5108

That regen receiver they showed looks a lot like the beast that I brought back from the UK with me. Once again, I am hearing the siren song of the diabolical regens....

Progress continues on my Indian-ized Azorean DSB transceiver (with JBOT amp). I now have the amp nicely stabilized (thank God!). Now I just need to get the output from the balanced mod close to the 1 mW PEP level needed by the amp. Should be done soon. And my cold seems to be going away, so maybe I'll be able to share my tales of JBOT derring-do in a podcast this weekend.

Our book: "SolderSmoke -- Global Adventures in Wireless Electronics"http://soldersmoke.com/book.htmOur coffee mugs, T-Shirts, bumper stickers: http://www.cafepress.com/SolderSmokeOur Book Store: http://astore.amazon.com/contracross-20

Sunday, November 27, 2011

30% off on SolderSmoke, The Book. Cyber-Monday Sale. November 28


Our book: "SolderSmoke -- Global Adventures in Wireless Electronics"
http://soldersmoke.com/book.htm
Our coffee mugs, T-Shirts, bumper stickers: http://www.cafepress.com/SolderSmoke
Our Book Store: http://astore.amazon.com/contracross-20

Saturday, November 26, 2011

A Re-balanced Modulator for my Re-cycled Rig


My effort to bring my Azorean 17 meter DSB rig back to life continues. This is proving to be harder than I thought. I'm still taming my version the JBOT amp. It still seems to break into oscillation -- I think the oscillation freq is around 1 MHz. But I am making progress.

I had to go back and work on the balance modulator circuit. I really like the simple two diode singly balanced mixer circuit. But my original Azorean board had, like the oscillator board, been through a few too many rounds of modification and repair. I decided to start over. See above. I even came up with my own little innovation on this circuit. Doug DeMaw's original design called for a 100 ohm pot at the junction of the two diodes, with the signal coming off the tap. You adjust the pot to balance the circuit and null out the carrier. But I didn't have a 100 ohm pot. Lots of 1K controls were available, so I put in two 50 ohm resistors in place of the pot, then put the 1k pot between the diodes, with the tap to ground. This balances things out nicely. See below.

I hope to get a podcast out next week, but I've been suffering from a nasty headcold that would have introduced all kinds of weird audio effects.

Our book: "SolderSmoke -- Global Adventures in Wireless Electronics"http://soldersmoke.com/book.htmOur coffee mugs, T-Shirts, bumper stickers: http://www.cafepress.com/SolderSmokeOur Book Store: http://astore.amazon.com/contracross-20

Saturday, November 19, 2011

The Bar of King Arduino

I'm not sure what I would do with an Arduino, but articles like this definitely make me want one! Here's one passage:

To make the board, the group had a specific, student-friendly price as their goal: $30. "It had to be the equivalent of going out to dinner at a pizza place," Banzi says. They also wanted to make it quirky, something that would stand out and be cool-looking to erudite geeks. If other boards were often green, they’d make theirs blue; while some manufacturers economized on input and output pins, they’d add plenty to their board. As a final touch, they added a little map of Italy on the back of the board. "A lot of the design choices are weird for a real engineer," Banzi says with a knowing laugh, "but I’m not a real engineer, so I did it in a silly way!"

Here's the article. Note the origin of the name of the device.

http://spectrum.ieee.org/geek-life/hands-on/the-making-of-arduino/0

Our book: "SolderSmoke -- Global Adventures in Wireless Electronics"http://soldersmoke.com/book.htmOur coffee mugs, T-Shirts, bumper stickers: http://www.cafepress.com/SolderSmokeOur Book Store: http://astore.amazon.com/contracross-20

Friday, November 18, 2011

Steve Smith (on the left) and Bill (with the filter)

Steve "Snort Rosin" Smith has been keeping me on the side of the angels (and the FCC regs) in the area of harmonic filtering. Today he sent me this Steve and Bill cartoon. Thanks Steve. Just what I needed as I prepare for my next attempt to get my JBOT (with filter!) to behave. Wish me luck!

Our book: "SolderSmoke -- Global Adventures in Wireless Electronics"http://soldersmoke.com/book.htmOur coffee mugs, T-Shirts, bumper stickers: http://www.cafepress.com/SolderSmokeOur Book Store: http://astore.amazon.com/contracross-20

Thursday, November 17, 2011

Amplifier Woes -- Help me! Help me!

When I look in the mirror and I see a haunted, obsessed look in my eyes. My wife senses that there is something wrong in the ham shack. She is right. I have an amplifier that wants to be an oscillator. Help me exorcise these gremlins! Guys, this problem is holding up the production of the next SolderSmoke podcast.

My JBOT amp works fine into a dummy load, but when I connect it to an antenna, it gets unstable. Here are some more details of the symptoms:

I am running the JBOT with a 5 element (two toroids, 3 caps) low pass filter (designed by Doug DeMaw and approved by Steve Smith).

With the antenna connected, all is well UNTIL I raise the power out (by varying the input) beyond about 1 watt. Below one watt, the amp is working fine, and it stable. As soon as I hit the 1 watt point, the amplifier seems to break into oscillation. This does not happen into the dummy load.

The antenna is a simple dipole fed by coax. It shows a low SWR. Even when I put an antenna tuner between the amp and the antenna and bring the SWR down to negligible levels, the instability problem persists.

With the amp disconnected from all other circuitry other than the antenna and the power supply, if I just touch the input capacitor, it breaks into oscillation. This does not happen when the amp is working into the dummy load.

I've bolstered the power supply filtering and decoupling. No luck. I tried some de-Qing of the transformers. No luck.

Any suggestions?


Our book: "SolderSmoke -- Global Adventures in Wireless Electronics"http://soldersmoke.com/book.htmOur coffee mugs, T-Shirts, bumper stickers: http://www.cafepress.com/SolderSmokeOur Book Store: http://astore.amazon.com/contracross-20

Sunday, November 13, 2011

Backyard Solar Astronomy

Over the weekend I took a break from JBOT amplifiers and did something I've been meaning to do for a long time: solar astronomy. I pulled out my old 4.5 inch Tasco reflector telescope and aimed it at old sol. I know, I know, this can be dangerous, but we were careful -- note that Billy is standing on the other side of the business end of the telescope. In his hands is the paper onto which we projected the solar image. I'd always wondered how I would get the sun into the telescope's field of view without risking my eyesight by using the finder scope. This turned out to be no trouble at all: I just looked at the shadow cast by the tube of the telescope and --using the shadow as my guide -- moved the tube until it was lined up with the sun. We snapped a picture of our results. I think our crude effort compared very favorably with the picture from NASA's Solar Dynamics Observatory. You can see the same sunspots in each image (ours is reversed because we were using a reflector). These images are from 12 November 2011.

Our picture


NASA's picture

Our book: "SolderSmoke -- Global Adventures in Wireless Electronics"http://soldersmoke.com/book.htmOur coffee mugs, T-Shirts, bumper stickers: http://www.cafepress.com/SolderSmokeOur Book Store: http://astore.amazon.com/contracross-20

"The Knack" on a Mysterious Island

Paul, W2IOG, sent a nice e-mail about a very early use of the term "The Knack": 1874 by Jules Verne. (What word did he use in French?). I took a look at the Wikipedia page and discovered that there was indeed quite a bit of "The Knack" on Lincoln Island:

"With the knowledge of the brilliant engineer Smith, the five are able to sustain themselves on the island, producing fire, pottery, bricks, nitroglycerin, iron, a simple electric telegraph, a home on a stony cliffside called "Granite House", and even a seaworthy ship. They also manage to figure out their geographical location."

Hello Bill,

I have been a listener to your Soldersmoke pod-casts for a couple of years now. I am also a regular reader of the blog as well as a long time victim of "The Knack". I was browsing an old book store the other day when I came across a beautifully illustrated copy of Jules Verne's book "The Mysterious Island" copyright 1920. I couldn't resist, and when I reached chapter nine of part one of the book I was really glad I had made the purchase. In the story, which takes place in 1853, castaways on an apparently uninhabited island are trying to make fire for the first time. After trying and failing to make sparks by striking stones together, two of the castaways try the following:

"Pencroft, although he had no confidence in the proceeding, then tried rubbing two pieces of dry wood together, as [primitive people] do. Certainly, the movements which he and Neb gave themselves, if they had been transformed into heat, according to the new theory, would have been enough to heat the boiler of a steamer! It came to nothing. The bits of wood became hot, to be sure, but much less so than the operators themselves.

After working an hour, Pencroft, who was in a complete state of perspiration, threw down the pieces of wood in disgust. 'I can never be made to believe that [primitive people] light their fires in this way, let them say what they will,' he exclaimed. 'I could sooner light my arms by rubbing them against each other!'

The sailor was wrong to despise the proceeding. [Primitive people] often kindle wood by means of rapid rubbing.
But every sort of wood does not answer for the purpose, and besides, there is 'the knack,' following the usual expression, and it is probable that Pencroft had not 'the knack.' "

Congratulations on getting that 17 meter rig back on the air!

Paul W2IOG


Our book: "SolderSmoke -- Global Adventures in Wireless Electronics"http://soldersmoke.com/book.htmOur coffee mugs, T-Shirts, bumper stickers: http://www.cafepress.com/SolderSmokeOur Book Store: http://astore.amazon.com/contracross-20

Saturday, November 12, 2011

Sunspots! QRP DSB contacts on 17 meters


You can see here why I had so much fun in the summer of 2001 with my Azorean Homebrew QRP DSB rig. And why I am now re-CYCLING (get it?) and refurbishing the 17 meter gear that I built last cycle.

I've had the DSB rig on the air yesterday and have worked seven stations (2 watts peak DSB to a dipole).

Back to the Future! Someone on QRP-L said the SFI was recently at 180! Go Sol!

Our book: "SolderSmoke -- Global Adventures in Wireless Electronics"http://soldersmoke.com/book.htmOur coffee mugs, T-Shirts, bumper stickers: http://www.cafepress.com/SolderSmokeOur Book Store: http://astore.amazon.com/contracross-20

Thursday, November 10, 2011

JBOT Amplifier Installed in Azorean DSB Rig

I've been remiss in posting to the blog, but I have a good excuse: I've been melting solder. I have working on the installation of my new Farhan-designed JBOT amplifier in my old Azorean DSB transceiver. I'm really enjoying this project, and I now see it as the first in a series. My shack has a number of creations that were built during the peak years of the last solar cycle, but have since fallen into disuse. Many of them were partially cannibalized -- usually it was the RF amplifier that was taken out. The JBOT was just what I needed. I plan to refurbish all of these rigs, adding a bit of India to each one of them. This is very much in keeping with our "International Brotherhood of Electronic Wizards" ethos.

The installation went fairly well, but with all of the ups and downs that accompany this kind of project. The amp worked fine on the bench, fed with a signal generator and into a dummy load. But of course, life got more complicated when I installed it in the rig. Yes, it took off on me. This was no fault of the amplifier -- I just needed to add some additional shielding. It is working fine now. See above. I moved it out of center stage and put it off in the corner to avoid feedback problems. More discussion of this in the next podcast (maybe this weekend).

Our book: "SolderSmoke -- Global Adventures in Wireless Electronics"http://soldersmoke.com/book.htmOur coffee mugs, T-Shirts, bumper stickers: http://www.cafepress.com/SolderSmokeOur Book Store: http://astore.amazon.com/contracross-20
Designer: Douglas Bowman | Dimodifikasi oleh Abdul Munir Original Posting Rounders 3 Column