DSB QRP DX on 17

The solar flux index is now above 131 and the effects are very apparent on 17 meters. (I will pull out the telescope this morning to get some direct confirmation of improved solar conditions!) This morning I worked Daniel, F5BBD, with my little DSB rig with the 5 watt JBOT amplifier. Very solid contact. He gave me a 55. I hear Japanese stations in the evening. And I am hearing guys on 17 who I haven't heard since the last solar cycle: My friend Chris SM0OWX seems to be right where he was when we last spoke.

Our book: "SolderSmoke -- Global Adventures in Wireless Electronics"http://soldersmoke.com/book.htmOur coffee mugs, T-Shirts, bumper stickers: http://www.cafepress.com/SolderSmokeOur Book Store: http://astore.amazon.com/contracross-20

Find your Estes Rocket Catalog Online

On Wednesday we were all waxing nostalgic about 73 Magazine. (Did anyone figure out how to download ALL 511 of them?) I mentioned that I read many of the early 1970s editions from cover to cover. This morning I found on the Maker blog links to another publication that was burned permanently into my adolescent memory banks: The Estes Model Rocket catalog. Wow, I spent a lot of time studying the tech stats on the various rockets and rocket engines. (A8-3s!) I suspect that many SolderSmoke fans were also Estes enthusiasts.

Here are ALL the catalogs:
http://www.estesrockets.com/customer-service/full-catalog/

I think mine was the 1971 edition (above). I still feel bad about losing my Astron Big Bertha. And guilty about all the frogs I killed in the Astron X-Ray. I forgot all about the rocket with the 8 mm movie camera.

Our book: "SolderSmoke -- Global Adventures in Wireless Electronics"http://soldersmoke.com/book.htmOur coffee mugs, T-Shirts, bumper stickers: http://www.cafepress.com/SolderSmokeOur Book Store: http://astore.amazon.com/contracross-20

73 Magazine -- Online!

Some of my earliest ham radio memories are of 73 Magazine. Perhaps this has something to do with the electro-erotica cover shots of the early 1970s! I used to buy copies at "Electronics 59" in Spring Valley, New York. I remember struggling to understand the magazine: Why were these guys so obsessed about going to Navassa Island? Why was there a column entitled "Never Say Die?" Why was the classified section entitled "Caveat Emptor?" In time, all this would become clear to me. Occasionally, I'll come across an old issue and will suddenly remember it from when it first came out. I must have read these things cover-to-cover. (Jean Shepherd recalled reading even the grommet ads in the old QSTs.)

I really liked 73. It always had a zany, edgy, kind of "out-there" feel to it. Of course, near the end it went too far off the reservation (Bio-electrifiers? Faked moon walks?)

This morning QRP-L brings us the news that all the back issues are available on-line:

http://www.archive.org/search.php?query=collection%3A73-magazine&sort=-publicdate

I'm hoping that somewhere in there we will be able to find that early 70's article about the varactor-tuned DC receiver that I tried to build but couldn't get working.

Our book: "SolderSmoke -- Global Adventures in Wireless Electronics"http://soldersmoke.com/book.htmOur coffee mugs, T-Shirts, bumper stickers: http://www.cafepress.com/SolderSmokeOur Book Store: http://astore.amazon.com/contracross-20

A WWV Trick with the Drake 2-B

I was reading the October 1962 issue of 73 Magazine (we're always on the cutting edge here!). In the back pages a little piece from K4FQU (quite a call!) about the Drake 2-B caught my eye. OM FQU points out that by putting the bandswitch on 40 and the preselector at 10, WWV's 15 mc signal can be heard at the zero position on the 2B dial. It works! The familiar time signal beeps are coming through nicely here. It's fun to teach an old dog new tricks!

If you are looking for a 2-B, Bill KE5VZT alerted me to this one:
http://forums.qrz.com/showthread.php?325222-Drake-2B-with-Q-mult-amp-speaker

On the same page there is a review of a new Double Sideband rig from World Radio Labs -- the SB-175. Sounds like a winner!

Our book: "SolderSmoke -- Global Adventures in Wireless Electronics"http://soldersmoke.com/book.htmOur coffee mugs, T-Shirts, bumper stickers: http://www.cafepress.com/SolderSmokeOur Book Store: http://astore.amazon.com/contracross-20

"The Little Sweetheart" Receiver

Wow, what a beautiful piece of work! And a fascinating story behind it, with hints of wartime romance... Thanks to Mike AA1TJ whose very eclectic reading (Czech tech mags!) led us to this. Thanks also the Crypto Museum. Here is the link:

http://www.cryptomuseum.com/spy/sweetheart/index.htm

With more info here:
http://antiqueradios.com/forums/viewtopic.php?t=96007
And here:
http://antiqueradios.com/forums/viewtopic.php?t=96057

Our book: "SolderSmoke -- Global Adventures in Wireless Electronics"http://soldersmoke.com/book.htmOur coffee mugs, T-Shirts, bumper stickers: http://www.cafepress.com/SolderSmokeOur Book Store: http://astore.amazon.com/contracross-20

Amateur Radio Balloon Crosses The Pond (and the Continent)

Wow, congratulations to the California Near Space team. Their balloon flew from Silicon Valley, across the U.S., across the Atlantic and is now en route to Italy. As a former Azores APRS operator, I was pleased to see the APRS report from those islands. George, KJ6VU, of Sierra Radio Systems, was present for the launch.

Our book: "SolderSmoke -- Global Adventures in Wireless Electronics"http://soldersmoke.com/book.htmOur coffee mugs, T-Shirts, bumper stickers: http://www.cafepress.com/SolderSmokeOur Book Store: http://astore.amazon.com/contracross-20

Have An Oz Knack Christmas with VK2ZAY!

This is not the most flattering picture of our friend Alan, VK2ZAY, but I find myself forced to use it (again!) because of the Christmas light head-gear. Sorry OM.

I was thinking about Alan just the other day as I contemplated my broken Lafayette power supply (scroll down to the test gear article). You see, the meter in that little supply was destroyed by a trivial electric motor that Billy and I built a long time ago after a visit to Alan's amazing site. Don't worry Alan -- the broken meter is not your fault.

Once again proving that he is a true Knack victim and a certified member of the International Brotherhood of Electronic Wizards, Alan is doing an "Advent Calendar" of YouTube tech videos -- one short video each day during the Christmas season. I looked at a couple of them this morning. You guys will love them. Alan obviously has a deep understanding of the circuitry and a great talent for explaining how his creations work.
Thanks a lot Alan! Here is the link:

http://www.youtube.com/user/vk2zay

Our book: "SolderSmoke -- Global Adventures in Wireless Electronics"http://soldersmoke.com/book.htmOur coffee mugs, T-Shirts, bumper stickers: http://www.cafepress.com/SolderSmokeOur Book Store: http://astore.amazon.com/contracross-20

Seeing EM Waves with a Coffee Can

Thanks to Leif KC8RWR for alerting me to this. Amazing stuff, but somehow I think they need to get an Altoid tin into this project. You can sense the enthusiasm.

"Particles? We don't need no stinkin' particles!"

Our book: "SolderSmoke -- Global Adventures in Wireless Electronics"http://soldersmoke.com/book.htmOur coffee mugs, T-Shirts, bumper stickers: http://www.cafepress.com/SolderSmokeOur Book Store: http://astore.amazon.com/contracross-20

The "Snort Rosin" Test Gear Philosophy

Steve Smith, WB6TNL, and I often find ourselves on the same frequency:

Hi Bill,

After reading your latest blog post, I realized that you and I are somewhat kindred spirits. You successfully build and test relatively complex amateur radio equipment using the most basic and inexpensive test equipment.

As part of my business (land mobile radio) I own expensive and complex test equipment, however when I build and test homebrewed amateur radio gear I prefer to use inexpensive home-built or kit-built test equipment because that is what is generally available to most hams. My philosophy is that it is very important to impress upon beginning homebrewers the fact that fancy, complex test gear is not absolutely necessary to be successful in homebrewing.

Perfectly functional test gear can be built using only basic electronic tools. Certainly, homebrewed equipment might not have all the 'bells and whistles' of commercial gear and won't do everything 'automagically' but with careful calibration and learning how interpret the results, homebrewed test equipment can provide very accurate measurements.

One good example is your Palomar R-X Noise Bridge. Most every ham wants a MFJ 259B or Autek VA-1 antenna analyser but an inexpensive bridge like the Palomar or a homebrewed equivalent can provide many of the same measurements. Sure, a ham-band or general-coverage receiver is required to use a noise bridge but, by using -very- simple circuits, a very competent test receiver can be built using the most basic test gear. Even with only a good SWR meter and a little math thrown in, +/- Xj (reactance) measurements can be made (See http://www.qsl.net/n8xpv/ for information regarding "the 3 meter method" ).

One of my favorite resources for simple test equipment is Monty Northrup's (N5ESE} site: 73.......

Steve Smith WB6TNL "Snort Rosin"

From:

"solder smoke"

To:

"Steve Smith"

Great message Steve. Yea, I think the best troubleshooting tool is a real understanding of what is happening (or supposed to be happening) in the circuit and an ability to think logically about what could be causing the problem. Technical detective work. And indeed, that SWR bridge can tell you a lot.
73 Bill

Our book: "SolderSmoke -- Global Adventures in Wireless Electronics"http://soldersmoke.com/book.htmOur coffee mugs, T-Shirts, bumper stickers: http://www.cafepress.com/SolderSmokeOur Book Store: http://astore.amazon.com/contracross-20

Test Gear/Workbench Maintenance

I mentioned in the last podcast that I was going to take a break from construction projects and spend a little time fixing up tools, test gear, and the work bench. First up was my old soldering gun. I bought this thing almost 40 years ago! It is pretty beat up, but I managed to patch it up and it now works fine. Even the original light bulb works.

I use this little AADE L/C meter a lot, but was having trouble getting parts across the test terminals. So I soldered alligator clips onto one of the parts connectors that came with the device. Makes testing easier.

Just a little audio oscillator. Puts out .2 volts at 713 Hz. Useful for testing the phone rigs.

I picked up this little Lafayette power supply at a hamfest and found it quite useful. But then I managed to knock the needle off the meter while fooling around with trivial electric motor. Any ideas on where I could get a replacement meter movement, or on what value I should use?

Here is a wave meter that I picked up at the Kemptom Park rally in London. Apparently at one point all UK radio amateurs were required to have one of these devices. I'm tempted to chop it up for parts. That variable cap with the reduction drive looks promising. And could that meter solve my problem with the power supply (above). If anyone can think of a reason to keep this as a wavemeter, please let me know.

Further proof of my extreme retro-ness. This is what I use as a signal generator. A Heathkit SG-6. Older than me!

This is my scope. HAMEG. Supposed to be good to 10 MHz but of course I can use it at higher freqs (which I do). I need to upgrade. Any suggestions?

A very useful little square wave generator.

I need to make more use of this noise bridge. Lots of potential here.

Obviously a London purchase. Very useful little AF sig generator from the UK's equivalent of Radio Shack. My only complaint: No auto-off. I forget to turn it off and run down the two 9 V batteries.

Long time listeners will remember this device. This is the one in which I soldered in the chip upside down. It works fine on th 5 Hz to 100 MHz range. Dead on the 4 - 600 MHz position.

I bought this power supply at the Kempton Rally, then converted it into a current limited supply using a chip and a circuit provided by Tony, G4WIF. My daughter Maria helped paint the cabinet. Lots of soul in this little machine.

Just three meters. The middle (analog one) is still very useful, and has considerable sentimental value for me -- my wife got if for me when we were back in the Dominican Republic.
My version of the W7ZOI power meter. Mike, KL7R, and I built versions of this device back in 2004 or so.
This is Cappuccio. He joins me in the shack most mornings. I'm not really a dog person, but I'm growing fond of him, even though he occasionally eats resistors and capacitors.

Our book: "SolderSmoke -- Global Adventures in Wireless Electronics"http://soldersmoke.com/book.htmOur coffee mugs, T-Shirts, bumper stickers: http://www.cafepress.com/SolderSmokeOur Book Store: http://astore.amazon.com/contracross-20

Homebrew Ferrari

Speaking of homebrew motors, a number of people sent me this YouTube video about another intrepid European with amazing workshop skills. Great stuff. (It reminded me of the title of one of Jean Shepherd's books: "Ferrari in the Bedroom.")

Our book: "SolderSmoke -- Global Adventures in Wireless Electronics"http://soldersmoke.com/book.htmOur coffee mugs, T-Shirts, bumper stickers: http://www.cafepress.com/SolderSmokeOur Book Store: http://astore.amazon.com/contracross-20

The Woz's Early Exposure to Electronics

Here is what I was trying to --- hic-- say about Steve Wozniak --hic-- in Podcast #139:

From "Steve Jobs" by Walter Isaacson:

"One of Steve Wozniak's first memories was going to his father's workplace on a weekend and being shown electronic parts, with his dad "putting them on a table with me so that I could play with them." He watched with fascination as his father tried to get a waveform line on a video screen to stay flat so that so that he could show that one of his circuit designs was working properly. "I could see that whatever my dad was doing, it was important and good." Woz, as he was known even then, would ask about the resistors and transistors lying around the house, and his father would pull out a blackboard to explain what they did. "He would explain what a resistor was doing all the way back to atoms and electrons. He explained how resistors worked when I was in the second grade, not by equations, but by having me picture it."

This is clearly the approach to electronics that we see in the book "From Atoms to Amperes" by F.A. Wilson.

Mike, KC7IT, gave Woz a new title "the uber-knack-master of all time":

Woz is the uber-knack-master of all time, and always has been in my book. His Apple II design is a work of genius in getting ten pounds of function out of five pounds of parts.

One of many examples: Apple II was the first personal computer to use DRAM memory chips, which were brand new then and kinda scary even for us pros. DRAMs store data as charges on tiny leaky capacitors. Every 20 milliseconds or so they have to be refreshed.

Everyone else had counters and logic just for refresh. Woz arranged the Apple II's display memory, so reading out the pixels to the TV screen 60 times per second did the refresh too, at no cost in circuits or performance. The elegant design of a pure knack genius.

Our book: "SolderSmoke -- Global Adventures in Wireless Electronics"http://soldersmoke.com/book.htmOur coffee mugs, T-Shirts, bumper stickers: http://www.cafepress.com/SolderSmokeOur Book Store: http://astore.amazon.com/contracross-20