Steve Smith of SolderSmoke's West Coast bureau sent us the link to this article about a very interesting guy who made enormous contributions to the radio art. Three cheers for Norman Krim!Power of Making from Juriaan Booij on Vimeo.
One of the many perks that I enjoyed during my four years in London was living near that city's amazing museums. I was more of a Science Museum or Natural History Museum guy, but the we also loved the V&A. Each day on my way to work, the 414 bus took me past the V&A's magnificent facade. I always tried to get a seat that would allow me to get a good look.
Over the weekend I built another JBOT 5 watt linear amplifier (design by Farhan). I used a nice piece of copper-clad board that Dave, W8NF, sent me (thanks again Dave). 
Our book: "SolderSmoke -- Global Adventures in Wireless Electronics"http://soldersmoke.com/book.htmOur coffee mugs, T-Shirts, bumper stickers: http://www.cafepress.com/SolderSmokeOur Book Store: http://astore.amazon.com/contracross-20
The good news is that conditions are not a lot better than they have been. The bad news is that they won't be getting much better. But take heart guys: the next few years should be pretty good. Now is the time to get those rigs and antennas for the upper HF bands in shape. Construction of a second 17 meter JBOT amplifier begins today (this one for the Azores SSB transmitter). 
Greg, KC2DWF, sent me this link to a really great web site about the AM broadcast station WLW (aka "The Nation's Station"). Brace yourselves guys, for we are now moving out of QRP land: The exciter on this baby is 50 kilowatts! The modulator could produce 400 kilowatts of AUDIO! The article is very well written, obviously done by an aficionado of high power RF. There are some great lines in there. Here is a sample: 
Universal VXO
Paul, W2IOG, alerted me to the passing of Robert Helliwell, one of the discoverers of the "whistlers" and an expert on VLF phenomena and the magnetosphere. Paul met him and tells me that he was a real gentleman. His obit is fascinating:
OM Dave, WA5DJJ, writes to us about a different kind of SKN -- I guess this would be SLOWWWWWW Key Night!
2012 is off to a good start here at SolderSmoke HQ. I'm planning on putting up an 80-10 dipole fed with open wire (window) line. So I need a balanced ATU. A very simple link coupled design appears in lots of the antenna books and handbooks (1980 ARRL Handbook page 19-8, RSGB's "Practical Wire Antennas" by John Heys, page 86): Just a series LC circuit in the primary and another tuned circuit with a split stator variable cap in the secondary. The junk box was VERY cooperative: I found a big tuning coil (or might it have been two coils?) probably from an old Heathkit DX-40 or DX-60) -- that would work for the secondary coil. Then for the primary I found a smaller coil that would fit perfectly (with one layer of Gorilla tape) inside the secondary. I also found two really pristine 1000 pF air variables (I know, they can't handle much voltage, but, hey, that's one of the benefits of being a QRP guy, right?) I used the HW-7 as a signal generator and this morning did some experiments with different loads. You have to play around a bit with the taps on the secondary, but the ATU seems quite capable of matching loads from about 50 ohms up to at least 10K, and it works from at least 40 meters to 15 meters.
I wanted to start off 2012 with something inspirational, and here it is: Ashhar Farhan's work bench. I was visiting his site yesterday and found lots of good info, good humor and, indeed, inspiration. Be sure to check out his RF generator project. And the page that gives his thought on tools and test gear. All of it is wonderful -- you'll find lots of evidence of Farhan's long-term case of The Knack, his efforts to put "soul into his new machines" (his kids are mentioned frequently in his descriptions of his projects), and his obvious qualification for membership in the International Brotherhood of Electronic Wizards. I really like Farhan's efforts to design rigs that can be built with parts available all around the world -- a JBOT amp of his design is percolating nicely in my 17 meter DSB rig, and has been crossing the Atlantic almost every day.
My rehabilitation of homebrew 17 meter gear from the last solar cycle continues. Following the same path that I followed in 2001-2002, I will now move from DSB to SSB. I pulled out the little receiver that I put together way back when. It is a version of Doug DeMaw's "Barebones Superhet" (aka "Barbados Superhet"). I bought it on the net. It had been put together by a skilled builder on a FAR Circuits board. The fellow who built it had changed the IF from Doug's original color burst freq (3.579 MHz) to 5 MHz. He had also put in a varactor controlled VFO using a DC voltage multiplier to get more voltage variation across the varactor. I also think he had it built for 20 meters. news:22f6e3ee.0503292244.1b9a1481@posting.google.com...
Dale
Newsgroups: rec.radio.amateur.homebrew From: meara.lon...@virgin.net (Bill N2CQR MOHBR) Date: 30 Mar 2005 22:33:57 -0800 Local: Thurs, Mar 31 2005 1:33 am Subject: Re: Homebrew projects |
Our book: "SolderSmoke -- Global Adventures in Wireless Electronics"http://soldersmoke.com/book.htmOur coffee mugs, T-Shirts, bumper stickers: http://www.cafepress.com/SolderSmokeOur Book Store: http://astore.amazon.com/contracross-20
Posts
All Comments
.webp)
Posts
All Comments
