Shuttle Discovery Arrives in Washington

I was out on the national mall yesterday morning to watch the Shuttle Discovery (atop a 747) fly over Washington DC en route to Dulles Airport and the Smithsonian Museum. Having watched Discovery when it was in orbit it was kind of bittersweet to see it go by this way. The event reminded me of going out to Hyde Park in London to watch the final overflight of the Concorde SSTs.


Our book: "SolderSmoke -- Global Adventures in Wireless Electronics"http://soldersmoke.com/book.htmOur coffee mugs, T-Shirts, bumper stickers: http://www.cafepress.com/SolderSmokeOur Book Store: http://astore.amazon.com/contracross-20

Alan Wolke on "Chat with Designers" Tonight!

From the fellows at NJQRP:

This week's session of Chat With The Designers is tomorrow evening(Tuesday), starting at 8pm Eastern (0000z) on Teamspeak. We are in for a real treat this week, as Alan Wolke, W2AEW, a field applications engineer for Tektronix, will be leading the discussion on atopic he is very familiar with ... "Oscilloscope Basics. '' If you watch an electrical engineer tackling a tough design project, or a service engineer troubleshooting a stubborn problem, you¹ll see them grab a scope, fit probes or cables, and start turning knobs and setting switches without ever seeming to glance at the front panel. To these experienced users, the oscilloscope is their most important tool but their minds are focused on solving the problem, not on using the scope. We have a Notes page set up with a terrific presentation that we¹ll betalking to in this session, so be sure you have your browser set to thisduring the discussion as well ... http://www.njqrp.org/teamspeak/Apr10.html

If you¹ve not joined us for past topics, you¹ll find that we have some funin this 1-hour online meeting talking about various technical topics thatare likely of interest to homebrewers and experimenters here in our hamranks. It¹s open for everyone and all you have to do is have the Teamspeakdriver loaded onto your computer. (For guidance on this, see

http://www.njqrp.org/teamspeak/TeamspeakInstructions.html)Looking forward to seeing
(hearing) many of our 30-some regulars, and inviteothers who have not yet joined in on the fun!73, George N2APB& Joe N2CX& Alan Wolke W2AEW
Chat With The Designers ...http://www.njqrp.org/teamspeak/TeamspeakChat.html

(See this page too for past sessions and MP3 podcasts of the audio portionof each week.)PS: If you happen to follow us in our audio podcasts each week, the lastsession on ³Soldering 101² is loaded and available at:http://www.njqrp.org/teamspeak/Mar20.html
-----------------------------------------
Our book: "SolderSmoke -- Global Adventures in Wireless Electronics"http://soldersmoke.com/book.htmOur coffee mugs, T-Shirts, bumper stickers: http://www.cafepress.com/SolderSmokeOur Book Store: http://astore.amazon.com/contracross-20

We need more sunspots!

Conditions on 17 meters are bad today. I pulled out my 6 inch reflector telescope to do some troubleshooting on ol' sol. Yea, just as I thought: one measly sunspot. Confirmed by the SOHO image above.
There was a discussion on QRP-L recently about historical solar flux data. I started wondering what the SFI was on the day I was born. A few clicks with google brought the answer: On September 14, 1958 SFI was close to 300. Today it was 94. :-(

Something should be done about this! Write to your Congressman! Demand more solar activity!

Our book: "SolderSmoke -- Global Adventures in Wireless Electronics"http://soldersmoke.com/book.htmOur coffee mugs, T-Shirts, bumper stickers: http://www.cafepress.com/SolderSmokeOur Book Store: http://astore.amazon.com/contracross-20

Ponderosa Knack! Bonanza Astronomy!

I loved this episode, and I think most of you guys will too. I was alerted to it by an article by famed comet hunter David Levy. Wow! I never would have thought that in a 1962 episode of the cowboy show Bonanza, we would find amateur astronomy and experiments to determine the speed of sound and the speed of light. Amazing. There is no radio in this so it is not really The Knack, but young Mr. Michelson (yes, the Nobel Prize winner) does set up a shack-like workshop and he is trying to measure c. So this is all very Knack-like. There is also a very nice moral to this story, a moral that is related to our notion of an International Brotherhood of Electrical Wizards.
Three cheers for Ben Cartwright!

You can find the episode here. It runs for 48 minutes:
http://www.youtube.com/watch?v=hzPRGV0HbMk

Our book: "SolderSmoke -- Global Adventures in Wireless Electronics"http://soldersmoke.com/book.htmOur coffee mugs, T-Shirts, bumper stickers: http://www.cafepress.com/SolderSmokeOur Book Store: http://astore.amazon.com/contracross-20

EE Web Featured Engineer: Alan Wolke, W2AEW

I really liked this interview with our friend Alan. You can see definite signs of an early case of The Knack here: I was especially impressed by the fact that he made one of his first antennas from wire salvaged from the deflection coil on an old TV. (I took the easy path and chopped up my dad's extension cords!)

I also liked Alan's response to the question about his favorite software tool: "Gee, solder is soft, can we consider that software? I use a lot of that!" This is very reminiscent of a quote from the legendary Bob Pease (colleague of Jim Williams): "My favorite programming language is solder." (That quote was sent to me by Steve WA0PWK. Thanks Steve.)

Lots of good troubleshooting wisdom in this interview, and Alan's enthusiasm for electronics clearly shines through:
http://www.eeweb.com/spotlight/interview-with-alan-wolke

If you're also interested in the field of electronic repairs, visit www.guidetocareereducation.com for a list of schools offering electronics and engineering training programs.

Also, be sure to check out Alan's YouTube videos, especially those on how to use an oscilloscope:
http://www.youtube.com/user/w2aew

 
Our book: "SolderSmoke -- Global Adventures in Wireless Electronics"http://soldersmoke.com/book.htmOur coffee mugs, T-Shirts, bumper stickers: http://www.cafepress.com/SolderSmokeOur Book Store: http://astore.amazon.com/contracross-20

"An Analog Life" A Video Tribute to Jim Williams

Yi Yao alerted us to this. Don't miss this one!


Our book: "SolderSmoke -- Global Adventures in Wireless Electronics"http://soldersmoke.com/book.htmOur coffee mugs, T-Shirts, bumper stickers: http://www.cafepress.com/SolderSmokeOur Book Store: http://astore.amazon.com/contracross-20

Yi Yao has The Knack!

Hi Bill,

I discovered SolderSmoke a few years ago by listening to another pod
cast. Ever since, I have been hooked on this podcast and listen to it
whenever I have time. I have finally caught up and finished episode
142 today. I love the enthusiasm and spirit of discovery and creation
that goes into the stories in SS.

The first time I heard about amateur radio was in high school. It
seemed to be a overly nerdy thing at the time and I wasn't sure what
it was. However, after I started listening to SS, I discovered that
this is something that I wanted to do. So, on New Years Eve with the
kind help of a local examiner (Ori, VA3XW), I wrote my basic and
advanced exam and passed with honours. In Canada, we only have 3
categories: basic, advanced and morse code. I am very excited about
this and I am glad that SS made me make the jump.

You know, every time the word knack comes up, it is portrayed in a
negative way. Someone is "afflicted" with the knack or shows knackish
"symptoms" as if it was a horrible disease. I would like to change
this perspective.

I hereby declare myself blessed with the knack. Ever since I was a kid,
I disassembled various electronics around the house (to the dismay of
my parents). I knew when I was doing something right when I could put
something back together and it worked, or later, it worked better than
before. Despite my parents' persuasion to pursue other branches of
non-technical studies, I made up my mind to study electrical
engineering (must have been a teenage rebellion thing). Nonetheless
I finished school and found a job doing electronics design which I
love. Some of the people that you meet in this field are just
phenomenal. It has been a good career decision and I think it is truly
amazing. Thus, I see the knack as being a gift which I was fortunate
enough to hold.

I think one of the most important aspect of the knack is the desire to
understand and have self reliance on what we use on a daily basis. I
repair my own bikes and I've never bought a ready made computer.
Having a home machine shop greatly helps in this regard too. My first
oscilloscope I designed and built myself:
http://yyao.ca/projects/oscilloscope/
I have also resolved to build my first rig instead of buying one.
However, work is really busy these days, and it doesn't look like I
will be able to do this soon. One of these days, I will construct my
own rig and wiggle the ether.

I am currently visiting Silicon Valley here in California. There is
much to visit and do here. For example, the De Anza Flea Market
happens every 2nd Saturday (which is my first introduction to a swap
meet):
http://www.electronicsfleamarket.com/

The Computer History Museum is amazing:
http://www.computerhistory.org/

For a limited time, you can see Jim William's work bench at the
museum. If you thought your workbench was messy, you haven't seen
anything:
http://www.eetimes.com/ContentEETimes/Images/EELife/williams%20desk.jpg

Now, imagine having the world's most smartest electronics engineers
having dinner together. That's what the Analog Aficionados Party is about:
http://www.edn.com/blog/Anablog/41523-Analog_Aficionados_party_Feb_18_2012.php

On top of that, there are a lot of trade shows which you can go to
check out the latest and greatest of test equipment. They don't have
the same feel as some of my analog oscilloscopes, but they are shiny.
As you can see, this is a paradise for anyone blessed with the knack.

Anyhow, this email is long enough and I hope your eyes haven't glazed
over yet. My best regards to you, Billy, Maria and your wife.

73,
Yi Yao
VA3YAO
Our book: "SolderSmoke -- Global Adventures in Wireless Electronics"http://soldersmoke.com/book.htmOur coffee mugs, T-Shirts, bumper stickers: http://www.cafepress.com/SolderSmokeOur Book Store: http://astore.amazon.com/contracross-20

Workbench Upgrade

Lots of good ideas in Todd's video. I need to do a lot of this kind of improvement.



Our book: "SolderSmoke -- Global Adventures in Wireless Electronics"http://soldersmoke.com/book.htmOur coffee mugs, T-Shirts, bumper stickers: http://www.cafepress.com/SolderSmokeOur Book Store: http://astore.amazon.com/contracross-20

Google CW!

Google announced this yesterday. VERY timely. I wish I had thought of this!



Our book: "SolderSmoke -- Global Adventures in Wireless Electronics"http://soldersmoke.com/book.htmOur coffee mugs, T-Shirts, bumper stickers: http://www.cafepress.com/SolderSmokeOur Book Store: http://astore.amazon.com/contracross-20

Murphy's Whiskers: SHAVED (with Belden 1671A!)

Brad, AA1IP, has come to the rescue and is offering Belden 1671A at prices SIGNIFICANTLY below cocaine levels. Thanks Brad!

Hello--
In response to Bill's plea on SolderSmoke #142 for an inexpensive source of Belden 1671A semi-rigid coaxial cable, I can offer it for sale at $.30 per foot in lengths up to 10 feet to 20 feet; handling longer lengths is problematical, as I don't have a good wire-respooling method at present. Postage and packaging for up to 10 feet of 1671A cable is extra and costs $3.25 for shipping via first-class mail to U.S. addresses (I honor PayPal and certain other payment methods). Note that coaxial connectors for 1671A are available (but not from me, alas). Also, the outer jacket of 1671A is best cut with a fine-toothed coping saw or a miniature tubing cutter such as... http://www.amazon.com/Pit-Bull-Mini-Tubing-Cutter/dp/B0027BBHW0

Questions welcomed as always. 73-- Brad AA1IP

P.S.: the "Murphy's Whiskers" Bill refers to are small pieces of copper braid wire that break off from RG-174/U (or other) coax braid and cause intermittent short-circuits in whatever they fall into.

Our book: "SolderSmoke -- Global Adventures in Wireless Electronics"http://soldersmoke.com/book.htmOur coffee mugs, T-Shirts, bumper stickers: http://www.cafepress.com/SolderSmokeOur Book Store: http://astore.amazon.com/contracross-20

A Workshop That's Really "Out There"

Wow.

http://www.nytimes.com/2012/03/29/garden/in-a-remote-part-of-utah-life-alone-in-a-hangar.html?_r=1

Our book: "SolderSmoke -- Global Adventures in Wireless Electronics"http://soldersmoke.com/book.htmOur coffee mugs, T-Shirts, bumper stickers: http://www.cafepress.com/SolderSmokeOur Book Store: http://astore.amazon.com/contracross-20

Saturn and Titan

One of the rewards of being an amateur astronomer is that from time to time you get to discover on your own astronomical facts that were actually discovered centuries ago. Like the orbital period of Titan. About ten days ago I reported on my early morning observations of Saturn. Titan was in the far right of my field of view. Then, a week later I looked again and saw that Titan was now in the far left of the field of view. It looked like it it had gone to the opposite end of its orbital track in about a week. I checked and, sure enough, Titan takes about 15 earth days to complete an orbit. Neat.

Our book: "SolderSmoke -- Global Adventures in Wireless Electronics"http://soldersmoke.com/book.htmOur coffee mugs, T-Shirts, bumper stickers: http://www.cafepress.com/SolderSmokeOur Book Store: http://astore.amazon.com/contracross-20