Oh man, we need more of these. Many more. Unfortunately, this may be the only one. I pulled this out of an old piece of mystery-gear given to me back in 1994 by my friend Pericles HI8P. Look at that: dual turning rates, solid construction, and very small. This device seems destined to go into my W4OP-built Barebones Superhet (in the background).
Podcasting since 2005! Listen to Latest SolderSmoke
Friday, May 6, 2016
Wednesday, May 4, 2016
Farhan's Cool BITX 40 (video)
I especially like the wood base and the transparent front panel. But we have to send Farhan a D-104!
Check out the video of this rig in action:
Farhan posted:
The BITX40 has a redesigned crystal filter at 12 MHz that contributes to a very clear signal. Note the clarity on SSB and the absence of noise due to the three poles of filtering. This was charminar net on May 2, 2016. I couldn't break-in. Probably because the tiny plug mounted mic was too far away from my mouth.
Tuesday, May 3, 2016
Un-modifying an S-38 in 1966, and the Urge to Build
Michael mentioned this article in the Comments section under yesterday's post. March 1966 issue of 73 magazine. Page 26. Just click on the images for easier reading. Or you can find the article here:
More S38 wisdom from 73 here:
That's the November 1976 issue, page 88.
I miss "73".
Labels:
Green -- Wayne,
Hallicrafters,
magazines
Monday, May 2, 2016
Hallicrafters S38-E Saved! it is not a "Pig with Lipstick." It Sounds Good! (Video) (And Radio Moscow recordings)
You guys know how it is: You get tired of struggling with an old piece of gear. You put it aside, thinking that you might never work on it again. But it sits there in the corner, sort of looking at you. A few days or weeks or years pass and you think, hey, I'll take one more quick look at this thing to see if I can get it going.
That's what happened to me this weekend with the Hallicrafters S38-E. I hooked up the isolation transformer and put a fuse in the primary. I checked the wiring of my rewound antenna coil primary and found that I had connected it wrong. Duh. I then found that the antenna tuned circuit tracks fairly well with the tuned circuits in the local oscillator.
I hooked it up to my 40 meter dipole and fired it up. As evening rolled around the shortwave bands started to perk up. The Chinese Broadcast stations were there, as was that fire and brimstone preacher Brother so-and-so. But then I tuned into Radio Havana Cuba and the guy was talking about homebrew shortwave antennas. Could it be? Yes indeed. It was Arnie Coro CO2KK. The Radio Gods had spoken! They clearly had wanted me to get this old rig going.
I still have a few things to do: I need to fix the front panel light. I want to put in a three-wire (with ground) AC cord. Perhaps a real BFO (the original circuit seems to run out of steam with strong SSB signals). And I need to spruce up the alignment on the 1.7-5 Mc and 13-30 Mc bands.
I think Pete and I may have been too harsh on this old receiver (calling it a pig with lipstick and all that). It is clearly not a great communications receiver, but it is nice for casual shortwave listening.
And here is a bonus treat for you guys: Remember Radio Moscow in the bad old days? Yesterday I found a site with good recordings of some of their 1965 broadcasts. This is just what you would have heard coming out of an S38-E in 1965:
Labels:
Hallicrafters,
Juliano -- Pete,
Short Wave Listening
Sunday, May 1, 2016
1625 Tubes and Si5351 Chips: JH8SST's FB Rig
Peter has been helping Jun JH8SST and other Japanese hams get their Si5351 synthesizers working with various displays. Jun has had some great success as you can see in the above video. I really like the combination of old (1625) and new (Si5351) technology.
Jun is a long-time homebrewer who as built some amazing stuff. Check out the pictures on his QRZ.com page:
And look at his cool 128x128 TFT display:
Other videos here:
Labels:
Japan,
Juliano -- Pete,
Si5351,
Tubes
Saturday, April 30, 2016
KC9KEP's Superhet Receiver with HOMEBREW 455 kc IF Transformers
No store-bought 455 kc IF cans for Big Nick! FB OM. Great stuff.
We have featured Big Nick's beautiful work twice before:
More of his videos here:
Be sure to check out his coil winder.
Labels:
Superhet receivers
Friday, April 29, 2016
Reduction Redux: Searching for Some Smooth Spin
OK, here is yet another picture of my Mighty Midget's Mate receiver, this time with yet another main tuning dial. I gave up on the large reduction drive on the right -- it worked fine but was very stiff. I cracked open a smaller version of this very common Japanese-made reduction drive, but in this smaller one I was kind of surprised to find a Jackson Brothers drive in there. I now had three of these beauties available -- all of them worked fine but with considerable difference in ease of turning. I picked the one that was easiest to turn.
I had to cut the main shaft of the beautiful Hammarlund 35 pf variable cap that I am using. This was dangerous, because of the risk of messing up the delicate bearings. I stayed out of trouble by putting the tip of the shaft in a vise and then cutting the shaft with a small coping saw. This prevented any force from being transferred to the bearings. It worked.
I was careful to try to line up the shaft and the reduction drive as closely as I could.
I needed something to serve as the tuning indicator. I used one of those small CDs that often carry the drivers for cheap electronic devices. It fit nicely. A standard sized CD was too big.
The final element was the knob itself. I had an old Drake 2-B knob in my junk box (who sent me that?). It was perfect and added a nice touch of soul to this old-new machine.
I built this receiver in 1998 and when I finished it I thought it was pretty good. But it is much better now. It has a nice 455 kc Toyo Crystal-Mechanical filter. The tuning ranges on 40 and 75 now line up perfectly with the phone bands. It now has a fuse in the power supply. And the tuning is now SMOOTH.
Labels:
Drake 2B,
Hammarlund,
McCoy -- Lew
Tuesday, April 26, 2016
Always Listen to Pete! Second Thoughts on the S38-E
After working a bit on the Hallicrafters S38-E receiver, I am forced to admit that Pete was probably right about this receiver when he warned me that I'd be putting lipstick on a pig. For those of you who have a sentimental attachment to this receiver, please don't take offense -- I understand. But while I had one of these as a kid, I never really BONDED with it. That Drake 2B was stiff competition for my radio affection. So I can be more objective about this thing. And I now think Pete was right.
Problems:
-- It is mechanically rickety. It jiggles around mechanically and, as a result, electrically.
-- The front end is no match for Northern Virginia RFI. All it has between the antenna and the converter tube is one puny LC circuit. Not enough.
-- The LO mixer and the LO are stuffed into one 12BE6 tube. The IF amp and the BFO cohabitate in another tube. In each case there just seems to be too much going on between one plate and one cathode.
-- The whole AC/DC transformer-less thing is kind of nuts. You have to get used to TWO ground symbols on the schematic: one symbolizes B- (and is not attached to the chassis). The other is to chassis ground. Turns out that my E model is not really a "widow maker" -- they have a 470K resistor and a cap between B- and chassis ground, so the damage you could do to yourself was quite limited. Still, it is all kind of goofy. I have an isolation transformer on the chassis, ready to move this receiver into the 1960s if the spirit ever moves me. KB2WIG commented: "At closing time, I don't care if the S38 has lipstick."
As I worked on this thing, I began to realize that the little homebrew 6U8 receiver I have next to it on the bench is a much better receiver. So I began to lose enthusiasm for putting lipstick on the S38-E. At least for the moment. I do like the cool 1950s place names on the S38-E's front panel:
Java
USSR
Vatican
Singapore
Edmonton (!)
Congo
Milan
Iceland
Angola
And of course, the CD (Civil Defense) frequencies. (For when you wanted to do some shortwave listening while ducking and covering. )
But for now, me and the S38 are on a break.
Labels:
Hallicrafters,
Short Wave Listening
Saturday, April 23, 2016
A Reduction Drive for the Mighty Midget's Mate Receiver
This morning I put a reduction drive onto the main tuning cap of my 6U8 Mate for the Mighty Midget receiver. Before I had been directly turning the 35 pf variable cap. The tuning rate was a bit too high for easy tuning of SSB stations. This drive went in nicely and it does reduce the tuning rate considerably, but it feels a bit tight. Is there anyway to loosen up one of these drives?
Labels:
Mate for the Mighty Midget,
McCoy -- Lew,
Old radio,
Tubes
Wednesday, April 20, 2016
Meeting up with ARRL CEO Tom Gallagher, NY2RF
On April 12, Tom Gallagher NY2RF was in DC and was kind enough to make some time in his schedule for us to get together and talk about radio. As we mentioned on a recent podcast, Tom, who has recently taken over as Chief Executive Officer of the American Radio Relay League, is a true FB ham. He has a restored Drake station that he keeps on the air, and was recently talking up the Michigan Mighty Mite during his interview with Eric 4Z1UG in the "QSO Today" podcast. And he is a SolderSmoke listener. It was great to finally meet Tom. We are all lucky to have him at the ARRL.
Labels:
ARRL,
Israel,
Washington D.C.
Tuesday, April 19, 2016
Pigs, Lipstick, and my old Hallicrafters S38 "Widow Maker"
I blame Grayson for this. After getting my old 6U8 superhet running nicely on 80 and 40, my attention turned to an old Hallicrafters S38-E that had been relegated to the car port (Armand saw it out there, looking abandoned.) I didn't like it because of its "transformer-less" "widow-maker" power supply. I was afraid to even GIVE it away for fear that someone would electrocute themselves. But Antique Electronics Supply had an isolation transformer, so the order went in.
I have to rewind or replace one of the primaries on the input antenna coil. This was a victim of the original cheapo power supply. Apparently the antenna terminal got grounded when the chassis was "hot." POOF -- smoke was released.
The bands do seem to sound better through thermatrons... And there is an undeniable 3-D aspect to working on these old rigs.
So yes, in a certain sense REAL RADIOS GLOW IN THE DARK.
.............
Bill, I think that as long as you don't work on it in the car port in your bare feet you'll be fine! Good luck with it and don't blame Grayson too much. I think it was destined to come back in the house eventually. The radio gods have been whispering in your ear!
Ciao! & 73, Armand
Ciao! & 73, Armand
............
Bill:
I’ll take the blame, no problem!
S38 is nice to work on, plenty of room, no magnifying glass required. But I have to admit I am not a big fan of working on low cost AC line powered “raft-anchors” (too little for a boat). Definitely give it a isolation xformer and replace the filter cap(s). If it doesn’t weight 50+lbs, a bit lightweight for me.
If you need a good thermatron homebrew project (and who doesn’t really), I’ll send you plans for a nice 4-thermatron (including compactron) AM/CW 20/40M 5 watt transmitter I am finishing up (90% of the work is “finishing up”). Designed from scratch. Actually works. Uses a new construction technique I’ve been working on.
Grayson
..........
Hi Bill,
As I read about your next project – kept thinking –you can put lipstick on a pig BUT it is still a pig. I had one and put an isolation transformer on the front end –but found I was showing signs of carpal tunnel syndrome on my left hand as I kept retuning the radio because it drifted so much. Have fun.

Pete
Pete:
I don't know. Simplicity is a virtue, and this thing is pretty simple: RF amp, mixer, LC oscillator, detector, audio amps. Broad as a barn door with just two 455 kc IF transformers for the filter. Lots of room on the chassis.
As for drift, my little 6u8 RX with LC oscillators in both LO and BFO settles down very nicely.
Bill
...............
Hi Bill,
I surely didn’t mean to denigrate your next homebrew project and perhaps it was that the one I had was a dud in the lot.
But I then moved up to the SX-99 and was in tall clover. Besides today we have some things we can do to enable “tamer” oscillators. So why not? You need to team that up with the M^3 and make some contacts.
Pete
.............
Pete: I KNEW you would try to get a synthesizer of some sort inside the S38-E. But I say NO! I had a lot of fun getting the LC oscillators in my 6U8 rig to tune exactly where I wanted them to tune. You know, play around with the cap in series with the main tuning cap to change the tuning rate (better than removing plates -- they are hard to put back on!). Then changing the values of the L and C elements to get the thing to oscillate in the desired range. Then wrap it all up with some Dymo tape on the 1/2 CD "tuning dial." Sure, I know, that would have been a few keystrokes on the Arduino, but somehow this old way puts you closer to the physics, closer to the electrons. Take a look at the e-mail about Wooden Boats, VFOs and PTOs on yesterday's SS blog.
The "widow maker" potential of the S38-E was apparently on the minds of the guys who designed the cabinet. The whole box and the front panel are all very carefully insulated from the chassis. Plastic nuts!
Nice looking pig, by the way. She may appear on the blog soon.
73 Bill
Labels:
Hallicrafters,
Old radio
Monday, April 18, 2016
Wooden Boats, VFOs and PTOs -- Recovering Lost Arts
![]() |
Photo from radiomuseum,org |
I couldn't resist posting another great message from Rick Campbell, KK7B. This one was sent by Rick to the r2pro mailing list. Rick mentions the Collins Permeability Tuned Oscillator. More info on this magnificent bit of old tech can be found here:
Rick writes:
Great stuff here on different approaches to designing-building-experimenting with stable VFOs. Some of it is a mature art, and some really is a lost art--but that's good. There's nothing quite so gratifying as recovering a lost art while taking advantage of modern tools and techniques, and perhaps exchanging ideas on some new-fangled communications medium.
If you ever want to see folks having a blast recovering a lost art, head to a wooden boat festival and watch the kids learning from old codgers who can do magic with a little bit of centuries old technology. Just don't mistake it for reenactment--some of the new boats these kids are designing, rowing and sailing may include some venerable tools and techniques and give an aesthetic nod to classics, but they are lighter, easier on the environment, easier to transport, and much much faster than historic craft.
We can do the same with our radios. Spend as much time designing and building your VFO as I spent designing the small sailing rig for my little boat--or convert an old Collins PTO to solid state. For highest performance use a mix of old and new--I use hand stitched 1968 sails from the Schatteaur Loft in Seattle on my bigger old boat. Old radios are a treasure trove of parts and technology, and since 1959 well-designed HF gear has been stable enough for SSB.
I measured one of my converted old Collins 2.5 to 3.5 MHz PTOs at 18 Hz per hour drift. It was originally built in the mid 1950s. Some problems were solved long ago, and the techniques and solutions hold up well over time.
As with the kids studying old wooden boat techniques and then taking their new creations out on the Salish sea, it is well worth our time and effort to spend some time studying how our forbears constructed a good VFO a half century ago. It's not just the schematic: the construction, materials, temperature coefficients...all are important, and the quickest way to come up to speed is to study old stuff that works well.
Good stuff, and have fun with the experiments.
Best Regards,
Subscribe to:
Posts (Atom)