Podcasting since 2005! Listen to Latest SolderSmoke
Saturday, November 4, 2017
The Ham-Radio Thermatron Roots of Silicon Valley
Hack-A-Day had an excellent piece on tubes and Silicon Valley this week. Makes me want to get the book "Secret History of Silicon Valley."
https://hackaday.com/2017/11/02/silicon-valley-was-built-on-tubes-of-glass/
Note above the Klystron prototype mounted on a wooden board. These guys clearly had THE KNACK.
Labels:
California,
radio history,
Tubes
Friday, November 3, 2017
Another Source for BITX Amp Boards - AG4ZP
Thanks for sharing (the infor on the modular BITX boards). I actually had a similar idea a number of years ago and designed a small PCB for the ubiquitous BITX amplifier design. I have the project shared on OSH Park and you can get three of them shipped for $5.
The project is shared here.
73,
Ryan AG4ZP
https://oshpark.com/shared_projects/6mnfQQ6e
Labels:
BITX20,
Parts suppliers
Tuesday, October 31, 2017
Cliff Stoll on Software, Snake Oil, and the Creation of Real Things
"I guess today's experimenters build things in software, without ever touching a soldering iron. The hocus pocus is inside the program. It's cleaner this way -- nothing to burn or zap, and you don't need a voltmeter... What happened to home-brewed and breadboarded circuitry? Where's the joy of mechanics and electricity, the creation of real things? Who are the tinkerers with a lust for electronics?"
From "Silicon Snake Oil" 1995 by Cliff Stoll
Labels:
SDR
Monday, October 30, 2017
Modular BITX Boards
From Mike W0MNE to the BITX20 group:
Good afternoon,
I've had a few emails regarding the modular BiTX build and I probably should clarify a few things. First, ON6RF has posted his gerber files on the link at Hackaday.com that I originally posted - just scroll down to around the middle of page to the 'Files' section. Since he has placed these in the public domain they are available to anyone that cares to download them. But, because it is HIS work, I'm not comfortable forwarding the files myself. I don't know if he follows it but I'm sure that he can keep track of how many downloads have occurred and I'm certain he would be gratified to know that his work is appreciated. What I have offered is to make my gerber file for the motherboard available and, if I can manage it, I will post it here in the files section in the Modular BiTX folder. I will also include the pdf files that I created for each of the module showing component placement and values.
As for acquiring the circuit boards, as I stated earlier, I use PCBWAY.com for production. Their prices are excellent and the turn-around time is hard to beat. The cost of the panelized pc board for me was $5.00 for 10 boards with DHL shipping costs of $22.00 for a total of $27.00. I ordered the boards late on a Monday and DHL delivered the finished boards the following Monday morning. Their website says boards that measure 100X100 mm or smaller cost $5.00 for 10 boards so whether you order 1 or 10, the cost is the same. To complete the build you will need 3 boards to have enough bi-directional amp modules so, if you're interested in following thru with building a modular version, you could perhaps join with two other interested parties and split the cost between you. With 3 boards you will be able to build a complete transceiver and have 2 extra modules for experimentation for every section except the bi-directional amps. As an example, on my first prototype I built the double balanced mixer as designed and a second one using an ADE-1 to compare the results. For the record, there was absolutely no noticeable difference between the two. I also built a 4-crystal filter as designed and an 8-crystal QER filter on a second board for comparison. There was a definite difference between these two modules.
I hope this clears up some of the questions and I'm still available via direct email to answer questions specific to my build or class presentation. I'm currently working on the assembly manual for my class and when finished I will post it also in the files section.
--73-- Mike -- W0MNE
Labels:
Belgium,
BITX20,
BITX40Module,
Kits,
Parts suppliers,
uBITX
Sunday, October 29, 2017
Ron Gang, 4X1MK on "QSO Today" Podcast: Knack Story, Satellites, Quads, Philosophy
Wow, Eric Guth's interview with Ron Gang 4X1MK really resonated with me:
-- Asked about how he got is start in radio, Ron went back further than many of us do in response to this question. He cited his early experiments with "two tin cans and a string." Yes, of course! I'd forgotten all about it, but in retrospect this might have been a very early indication of THE KNACK. (I'll bet many of our readers were also active on the String and Can band.)
-- Ron used a DX-100. FB.
-- Ron was active on the satellites. In his voice you can hear the joy and the burst of enthusiasm that resulted from those early satellite contacts. He also mentions the untimely demise of Oscar 13. Bummer.
-- Ron was the Israel correspondent for 73 Magazine. I held a similar position in Dominican Republic. My friend David Cowhig was at the same time correspondent from Okinawa, Japan. We should have a reunion of "73 Magazine Hambassadors."
-- Ron mentions John Tait EI7BA. John was a regular contact of mine when I was in the Azores. He appears in the SolderSmoke book. He was the one who introduced me to an important Irish accolade: John told me that WD-40 is "the Pope's pee."
-- Toward the end, Ron discusses the wonder of ham radio conversations, and provides a good suggestion on how to get beyond the all-to-common "hello-59-goodbye" contacts.
Ron's comments on the spiritual or philosophical aspects of the hobby were just the thing for a quiet Sunday morning.
Thanks to Eric and to Ron for a great interview.
Listen here:
http://www.qsotoday.com/podcasts/4X1MK
Labels:
DX-100,
Israel,
Knack Stories,
magazines,
satellites
Saturday, October 28, 2017
BITX40 Featured in "Nuts and Volts"
I know many of you will wince when you see Steve's unshielded mic cord lying right next to the front panel antenna connector, but please don't freak out about this -- in the article you will see that Steve acknowledges that the antenna connector would have been better placed on the back of the box. That's an example of the educational value of the BITX40 -- live and learn. Even with the connector like this, Steve was making many contacts.
The "Nuts and Volts" website very kindly let me read the entire article without a subscription.
Try here and click on the blue "digital edition" box:
http://www.nutsvolts.com/magazine/article/meet-the-bitx40-a-single-sideband-transceiver
Or try going directly here:
http://nutsvolts.texterity.com/nutsvolts/201711/?folio=36&pg=36#pg36
Labels:
BITX40Module,
Farhan,
magazines
Thursday, October 26, 2017
Pete's Simple-ceiver -- Al Fresco Success
N6QW's Simple-ceiver design is being replicated far and wide. Above you can see PA3GUP's beautiful rig in its "Al Fresco" stage of development. For much more of this -- including a cool video of Pete's rig in action -- go to Pete's blog: http://n6qw.blogspot.com/
Labels:
Juliano -- Pete,
Netherlands
Tuesday, October 24, 2017
630 Meter DX from Wasilla, Alaska
Kl7L's 600m Part 5 station |
I had a chuckle when you and Pete mentioned the new 630 and 2200m bands - and the real estate requirements - Well, I've been active with the experimental callsigns since 2003 and very glad we have finally got the bands - so a small form to fill out on the UTC web site and a 30 days wait to check you are not within 1Km radii of the co channel PLC on Trunk power lines, if no "disapprove" away we go - and I and many have!
Just turn off all those nasty dimmers, LED lights and SMPSU wallwarts - plonk your radio on 474.2kHz USB and decode using WSPR or JT9 and I think youll be surprised on what you can hear even on a short typical 80m or topband wire or so. There a lot of activity all around you
The station for both band is homebrew soldersmoke heaven - transverter/PA and filters/Couplers/Phase meters etc with only my ol' TS850 doing the prime driving, or a Hans Summers U3S.
Size does matter - but my best RX for both bands is a 2ft long active probe up a pine tree, that's all - and some 300ft of RG6, and the Tx antenna is a 60ft high Marconi or more over an inverted L with a 3 wire top cap all nested in the Birch forest - loads or radials but still very lossy in the Summer - nothing special here - Of course with the QRP per se we have to use CW or digital modes mostly but DX can be done - after all my closest active neighbor on 2200/630m is over 2000Kms away!
So, for the first time I sparked up on JT9 on 630m this early morning and first blood to QSO with VK4YB @ 5W EIRP!
Not bad for a first qso on what is a fairly typical back yard antenna - so, there is hope and many people appear to be putting transcontinental signals out this power, so everyone is on the same playing field - just the ground and location and latitude will change things! It tends to be more flaky, lossy and geo/solar events tend to hit us hard up here compared with say Seattle.
On 2200m TX its a loop of thick wire hanging in the trees - literally 500ft circumference and a beefy coupler to deal with the 50A or so of antenna current to make the 1W ERP or so - still its getting out OK and again should be putting signals over the Pole to EU and across the Pacific as it becomes more and more dark up here.
I'm now caught up with past Soldersmoke pod casts and thanks to you and Pete for making me smile
Take care
Laurence KL7L aka G4DMA et al
Wasilla Alaska 23rd Oct 2017
Labels:
Alaska
Monday, October 23, 2017
Woz with Soldering Iron; Wooden Enclosures for Electronics (Video)
The Woz scared me for a second -- I tought he was going to leave a hot iron on the desk amidst paper and other flamable items. But no -- he put the soldering iron in its holder.
Later we hear Woz talking about the need to update schematic diagrams. And I was esepcially taken by the use of wooden enclosures for electronic projects. My BITX rigs have followed the Apple example.
Labels:
computer history,
workbench,
Wozniak -- Steve
Sunday, October 22, 2017
Cliff Stoll -- K7TA -- Has THE KNACK. And a GREAT NOVA Video
Hack-A-Day had a piece on Cliff Stoll of "The Cuckoo's Egg" and "Silicon Snake Oil" fame. I read these books years ago. I included a quote from Cliff on page 45 of the SolderSmoke book (the quote seemed to foreshadow my aversion to SDR).
I didn't know that NOVA produced an hour-long program on Stoll's Cuckoo's Egg adventures. It is really good. Many of those involved play themselves in the video. Very cool. See above.
I checked Cliff's QRZ.com page. We wrote several years ago that Cliff has THE KNACK. Note below his preference for thermatrons and the affection for Heathkits. Diagnosis confirmed.
From QRZ.com:
Hi gang! This is Cliff Stoll, K7TA
Way back in the Jurassic, I was licensed as WN2PSX, in Buffalo NY. Got my general ticket around 1967 as WB2PSX, and helped build ham radio stations at Hutch-Tech high school, University/Buffalo, and University of Arizona. When I went to Tucson for grad school, I passed my extra ticket and snagged the call K7TA (back when this meant 20wpm cw). I held a first-class commercial ticket, which let me engineer at WBFO radio, but I don't know if commercial licenses even exist anymore.
I now live in Oakland California, and occasionally get on the cw lowbands with old heathkit gear ... just rebuilt my novice NC-270 receiver with filaments that glow in the dark. Gotta restring my 40 meter dipole that came down in a windstorm.
You can guess that I'm pretty much retired. Along the way, I've worked in FM radio, planetary physics, computing, writing, speaking, teaching, and math. Best way to reach me is through my website www.kleinbottle.com
Warm wishes to all -- 73's,
-Cliff
Info on Cliff's latest gig:
Labels:
books,
computer history,
heathkits,
Knack Stories,
Tubes
Saturday, October 21, 2017
The First "Transistor Radio"
I'm a few days behind on this. On October 18 Bob Crane pointed out that Garrison Keillor marked the anniversary of the broadcast band "transistor radio." I had mine (a 1970s version), and it did indeed allow me to listen to that seditious rock music without parental interference. Looking around the shack, I still have items in use that have "Transistorized" as part of their product name (like my Lafayette Radio Electronics Transistorized DC Power Supply."
Garrison (on October 18, 2017):
Transistors were a big breakthrough in electronics — a new way to amplify signals. They replaced vacuum tubes, which were fragile, slow to warm up, and unreliable. During World War II, there was a big funding push to try to update vacuum tubes, since they were used in radio-controlled bombs but didn't work very well. A team of scientists at Bell Laboratories invented the first transistor technology in 1947. But the announcement didn't make much of an impact because transistors had limited use for everyday consumers — they were used mainly in military technology, telephone switching equipment, and hearing aids.
Several companies bought licenses from Bell, including Texas Instruments, who was bent on being the first to market with a transistor radio. Radios were mostly big, bulky devices that stayed in one place — usually in the living room — while the whole family gathered around to listen to programming. There were some portable radios made with vacuum tubes, but they were about the size of lunch boxes, they used heavy nonrechargeable batteries, they took a long time to start working while the tubes warmed up, and they were fragile. Texas Instruments was determined to create a radio that was small and portable, and to get it out for the Christmas shopping season. They produced the transistors, and they partnered with the Regency Division of Industrial Development Engineering Associates, who manufactured the actual radios. Their new radio, the Regency TR-1, turned on immediately, weighed half a pound, and could fit in your pocket. It cost $49.95, and more than 100,000 were sold.
Texas Instruments went on to pursue other projects, but a Japanese company called Tokyo Tsushin Kogyo decided to make transistor radios their main enterprise. They were concerned that their name was too difficult for an American audience to pronounce, so they decided to rebrand themselves with something simpler. They looked up the Latin word for sound, which was sonus. And they liked the term sonny boys — English slang that was used in Japan for exceptionally bright, promising boys. And so the company Sony was born. Soon transistor radios were cheap and prevalent.
With transistor radios, teenagers were able to listen to music out of their parents' earshot. This made possible the explosion of a new genre of American music: rock and roll.
Labels:
radio history
Friday, October 20, 2017
The Quantum Indians
Beautiful video. Strongly recommended.
https://www.youtube.com/watch?time_continue=350&v=bI7sasQsQWI
Subscribe to:
Posts (Atom)