BITX on the Beach in East Java (Indonesia)

Nobel Prize winner Joe Taylor, K1JT, Talks to a Radio Club

Really great to see this session with Nobel Prize winner Joe Taylor, K1JT.
I liked his comments on his use of his retirement office at Princeton, University. 
I also liked his slide on how far below the noise level you can go with various modes. 
And then there was his reminder to 1) RTFM and 2) be sure to check the EME delay box so that your software will get the timing right when working earth-moon-earth. 

"Pulsars keep good time." 

A Beautiful Variable Capacitor (from Pete)

Is this a thing of beauty, or what?   Pete sent this to me back when I was having trouble finding a "smooth running" variable cap for my HRO dial receiver.  It has a standard Jackson Brother's reduction drive attached to the shaft, followed by a really cool gear arrangement.  Note the spring loaded teeth on the big gear -- that is to keep the gears tight when turning in both directions.  

As was the case with the HRO dial that Armand sent me, the beauty of this part will cause me to build something with it, really just for the purpose of putting it to use. We've been talking about double or triple conversion superhets with 100 or 50 kHz final IFs.  At those frequencies you can get good selectivity with LC filters.  As with the Drake 2-B.    Steve N8NM is sending me a dial that will go well with this part.  That will add to the already abundant mojo/juju.  I feel a VFO in the works.    Thanks to Pete for being so supportive of my luddite analogism.  

Life in Appliance Land

"Sexiest Radio!"   Hmmmm.

"It's the bomb." 

https://www.facebook.com/DXEngineering/videos/815962828760101/

The 3D waterfall is kind of cool.    As is the big screen on the wall. 

Homebrew Your Own Remote Head (with a 3D Printer) (Video)

After I issued a luddite complaint lamenting the arrival in ham radio of appliance-like "remote heads", Ed KC8BSV pointed out that at least one guy -- Joe VE1BWV -- is HOMEBREWING his own remote head. (You must admit, this sounds really weird.) I still haven't completely got my head around this, but Joe's video (above) is really impressive.  

We're living in the future my friends!

Remote your heads!  With 3D printers!   

Our Dismal Digital Future?

I'm sure some would find this device appealing -- to each his own.   But I don't like it.   It seems to mark another step down the path toward the complete appliance-ization of ham radio.  Note how the control head is looking more an more like something for your car audio system, or your cell phone.  

YUCK.  

Count me out. 

Just say NO! 

Menus are for RESTAURANTS!  

RIGS NOT RADIOS!   

HDR FOREVER!   

https://qrznow.com/barrett-4050-hf-sdr-transceiver/?fbclid=IwAR1LEoJ-nyeRKuzEu9tNdHcb1rRlTaD3zWnFDuIPrEdQ3cgytMU0hbQxOoc

From Cuba: "Technological Disobedience"

Necessity is indeed the mother of invention.  

This video made me think of the Jaguar DSB transceiver made in Cuba from the parts of Soviet-made television sets.  

Somehow I wish we were more technologically disobedient. 

"The Hobby Song" from Saturday Night Live

I kept waiting for OUR hobby to be mentioned....

Understanding Fourier Transforms

Lots of wisdom and insight here:

http://www.jezzamon.com/fourier/index.htm

Strongly recommended for those trying to understand mixers and harmonics. 

Digital Engineering vs. Analog Engineering

In  a book review Thompson makes this observation about the digital-analog divide: 

One difference might be that human beings can deal with ambiguity, and computers really can't. If you've done any Python [coding], you make the tiniest mistake, and everything stops immediately. That’s what makes it different even from other forms of engineering. When you are trying to fix a car, if you fail to tighten a bolt on one wheel as tight as it should be, the entire car doesn't stop working. But with code, an entire app, an entire website can go down from the misplacement of a single bracket. I think that's the one thing that sometimes scares writers away, because they are more accustomed to working with ambiguity.

https://arstechnica.com/gadgets/2019/04/how-the-new-art-form-of-coding-came-to-shape-our-modern-world/

I am definitely more accustomed to working with ambiguity. All of my rigs are filled with ambiguity. 

Understanding Digital Radios

Alan WA9IRS writes: 

Hi Bill,

Thought I would drop you a brief note.  I have been catching up on my listening to past issues of Soldersmoke podcasts and was particularly interested in the discussion between you and Pete concerning the simplicity associated with non-digital, integrated circuits and microprocessors and all of the rest of the very small miniaturized circuit elements.  You rightly pointed out that you desired (along with a lot of the rest of us) to fully understand what was going on in a circuit and for that reason desired to maintain the simplicity of transistor and discrete components in your design and build projects. 

 I agree with you completely but offer the alternative to the simple circuits in the form of the attached simple diagram of the signal flow path in a digital radio. I found this some time ago in a digital electronics magazine and thought you and Pete would find it interesting.  Perhaps this might be something to spring on Pete on 4-1-2018.

Take care and thanks to both of you for many pleasant and thoughtful hours of enjoyment listening to Soldersmoke!

All for now, 73,

Allan,  WA9IRS

My response: 

Thanks Allan, Very illuminating.   It is all clear to me now.   I feel so much better.  FB OM.   73  Bill 

Circuit for Farhan's Satellite -- Arduino in SPACE

Farhan sent me the schematic of the AISAT amateur digital satellite that went into orbit on April 1, 2019 from India.   He notes that the circuitry is very simple.   Indeed, it reminds me of the very simple but effective circuitry we saw in satellites in the early days of the space age.  Beautiful simplicity, with an Arduino on-board.   And it is great to see that Farhan did not forget the low pass filter.  FB OM.