BITX BUILD UPDATE #16 -- FIRST QSO!!!!!!!!!!!

 

Wow, it is very clear that the radio gods are pleased with my BITX efforts!  I had my first QSO on the new rig today.  And it was with a station in my old home, the place where I got my start in 17 meter homebrew phone:  THE AZORES!  CU7MD.  Very cool.

Our book: "SolderSmoke -- Global Adventures in Wireless Electronics" http://soldersmoke.com/book.htm Our coffee mugs, T-Shirts, bumper stickers: http://www.cafepress.com/SolderSmoke Our Book Store: http://astore.amazon.com/contracross-20

BITX Build Update #15 -- Necessary Mic Amp Mod

I was having trouble with the mic amp on my new Manhattan Discrete BITX 17.  I had it wired as per the schematic, but it just wasn't working right -- I was getting very little DSB out of the balanced nodulator, but everything worked fine if I 1) unbalanced the bal mod or 2) injected audio (from a sig generator) directly into the audio in port of the balancec modulator.  Clearly something was wrong in the mic amp circuit.  I noticed the collector voltage seemed quite low.

Some quick Googling revealed that others had struggled a bit with this problem also.  Nicolae's note was especially illuminating and useful: 
http://users.tpg.com.au/nfieraru/Electronics/BitX20_Mic_Preamp.htm

As Nicolae noted, the 10K value may have worked with lower gain transistors.  We must remember that BITX was (very admirably) designed for minimal cost and maximum use of scrounged parts.

I swapped the 10K resistor for a 39K and all is right with the world.  The band is not yet open here, but I bravely called a European aeronautical mobile station, hoping that he would be my first QSO on this rig.  I think he heard me, but no QSO (yet!).

Our book: "SolderSmoke -- Global Adventures in Wireless Electronics" http://soldersmoke.com/book.htm Our coffee mugs, T-Shirts, bumper stickers: http://www.cafepress.com/SolderSmoke Our Book Store: http://astore.amazon.com/contracross-20

BITX Build Update #14 -- STABILITY!

Good news on the BITX.  I think I have solved the low frequency oscillation problem in the power amplifier.  I tried running the PA off a separate power supply -- the oscillations disappeared leading me to conclude that the feedback was taking place via the power supply lines.   I put a 22 uF cap to ground from the top of the PA's RF choke.  With this cap in place I can dispense with the separate supply kludge. The amp is stable.

This morning I also resolved a different stability problem.  I'm using a relay for T/R switching.  One set of contacts controls the DC power, the other set was supposed to disconnect the receiver input from the antenna/lowpass filter when on receive.  But I had positioned the relay too far from the LP filter and RX input, so I ended up with this long piece of coax that was hanging off the PA output terminal and carrying lots of RF on transmit.  Yes, this led to oscillations.  I thought about repositioning the relay, but I think part of the problem is that even if optimally positioned, the long unshielded contact levers inside this relay would be radiating a lot of RF and causing stability problems.   So instead I put a small reed relay very close to the PA out and RX in connections.  It carries the signal to the receiver when in R mode, and disconnects the RX when in T mode, without any long coax lines or unshielded relay levers.   It works.

I still have a few things to do:
-- I need to build a proper speaker amplifier so that I can dispense with the amplified computer speakers KLUDGE.
-- I need to get a 3 pole double throw switch and some crystal sockets so that I can switch crystals from the front panel.  Three rocks will cover all of 17 meter phone.
-- I have to build a case for this rig.  I'm thinking wood, with tin or aluminum sheeting glued to the inside (for shielding).  


Our book: "SolderSmoke -- Global Adventures in Wireless Electronics" http://soldersmoke.com/book.htm Our coffee mugs, T-Shirts, bumper stickers: http://www.cafepress.com/SolderSmoke Our Book Store: http://astore.amazon.com/contracross-20

From Bits to Atoms -- Software vs. Hardware

I thought this was pretty good.  On Hack-A-Day.

http://hackaday.com/2013/10/18/guest-rant-from-bits-to-atoms/#more-105097

Our book: "SolderSmoke -- Global Adventures in Wireless Electronics" http://soldersmoke.com/book.htm Our coffee mugs, T-Shirts, bumper stickers: http://www.cafepress.com/SolderSmoke Our Book Store: http://astore.amazon.com/contracross-20

Feynman at G-QRP Convention!

What do Richard Feynman and the G-QRP club have in common?

The answer is an annual pilgrimage to Ripponden in Yorkshire, England. The G-QRP club have their convention in a local school and Feynman went there every summer to visit his wife's family. Here's an interview with Feynman filmed at the Old Bridge Inn which is about a mile from where the G-QRP club gather:

http://www.openculture.com/2012/11/richard_feynman_talks_physics_in_take_the_world_from_another_point_of_view.html

Is this enough to make Ripponden the Knack Centre of England?

Regards,  Alan G0RWB

Our book: "SolderSmoke -- Global Adventures in Wireless Electronics" http://soldersmoke.com/book.htm Our coffee mugs, T-Shirts, bumper stickers: http://www.cafepress.com/SolderSmoke Our Book Store: http://astore.amazon.com/contracross-20

Yikes! Screeching Transistors Throwing off Blue Light!

I found a quote from Doug DeMaw that I wanted to share.  This one seems appropriate as I struggle with unwanted oscillation (and as Halloween approaches). From the January 1986 QST:

"Self -oscillation occurs not only in the low-frequency and high-frequency spectrum, but it often takes place at audio frequencies!  I have actually heard the transistors "screeching" when strong audio oscillations were taking place in a homebrew transistor power amplifier. On one occasion I could see a bluish glow coming from within the transistors (visible through the ceramic heads of the devices) during a period of instability.  Needless to say, the transistors self-destructed."

I've been having some instability problems with my BITX 17 IRF510 final.  But I think I have the problem identified.  I was getting low frequency oscillations (around 100 KHz).  Tonight  tried putting the IRF510 on a separate power supply.  The oscillations ceased and I am getting a nice clean 3 watts out.   So I'll go back and beef up the decoupling on the power supply lines.


Our book: "SolderSmoke -- Global Adventures in Wireless Electronics" http://soldersmoke.com/book.htm Our coffee mugs, T-Shirts, bumper stickers: http://www.cafepress.com/SolderSmoke Our Book Store: http://astore.amazon.com/contracross-20

20% off on SolderSmoke Book

Just use the coupon code PUMPKINS at checkout:

http://www.lulu.com/spotlight/soldersmoke

(You can also use this coupon to buy Grayson's "Hollow-State Design" :
http://www.lulu.com/shop/grayson-evans/hollow-state-design/paperback/product-20987562.html

Our book: "SolderSmoke -- Global Adventures in Wireless Electronics" http://soldersmoke.com/book.htm Our coffee mugs, T-Shirts, bumper stickers: http://www.cafepress.com/SolderSmoke Our Book Store: http://astore.amazon.com/contracross-20