Podcasting since 2005! Listen to Latest SolderSmoke

Monday, October 26, 2015

HB2HB! AC9JQ -- N3FJZ on 40 with Homebrew Rigs

On Saturday October 24,  Dean AC9JQ (Indiana)  and Rick N3FJZ (Maryland) made contact on 40 meter SSB using Si5351/TIA BITX rigs.  FB!:

Bill:

Dean and I made contact.  We both were in and out most of the time, but conditions seemed to improve towards the end where I could understand Dean about 90%.  Using the RST "by the book", I would say he was a 33, 3 =(readable with some difficulty), and signal strength was 3=(weak), and based on what Dean was reporting, my signal back to him was the same - 33.

73 to you both.

Rick - N3FJZ.

Sunday, October 25, 2015

HB2HB! AC9JQ and N2CQR Make Contact on 40 with Homebrew Rigs on Both Sides (with help from N3FJZ/HB)



This weekend brought another HB2HB (Homebrew to Homebrew) contact.   We have been following with interest the 40 meter transceiver project of Dean, AC9JQ.  Above you can watch a video of Dean's rig in action before it went into the box.  Earlier this month Dean achieved a remarkable "Double First" when he made his very first amateur radio contact.  He was using his homebrew rig to do it.  So his first contact was also his first homebrew contact.   FB. More info on Dean's rig and homebrew exploits can be seen here:
http://soldersmoke.blogspot.com/search?q=ac9jq 

This week Dean got a decent 40 meter dipole up in the air.  We arranged (via e-mail) to meet on 40 on Friday evening.  We made contact, but conditions weren't great.  We tried again several times on Saturday, looking for open spots amidst the madness of the CQ WW DX contest.  Rick N3FJZ joined us and also tried to make contact with Dean, but had no luck either.  Daytime conditions didn't allow for a good contact between Indiana and the Washington/Baltimore area where Rick and I are located. 

Finally, last night after family obligations at both ends settled down, Dean and I found a relatively open frequency on 40 and made a good contact.  A short snippet of it can be heard by clicking on the link below.   Keep in mind that Dean was running about 2 watts to a dipole on 40 at night.   

http://soldersmoke.com/HB2HBAC9JQ.mp3

Thanks Dean!  Thanks Rick!

Saturday, October 24, 2015

German Thermatron Homebrew



Michael DF2OK has been melting solder in Germany.  Above is a short video of the first sounds made by an AC-1 replica he built.   Michael notes:  "Yeah, I love these old style radios. You can see nearly everything. :-)  BTW: All without Arduino and other black boxes and chips!"
FB Michael.

During the AC-1 build Michael struggled with a bad tube.  His discovery and resolution of the problem is presented in this video (understandable even to those who don't speak German):



Finally, here is a nice video of Michael's 40 meter regen receiver. Anyone who has built or worked with a regen will understand perfectly this video.  Watch Michael tune in stations while adjusting the regeneration.  Note his demonstration of the lack of hand capacitance. FB Michael!  Thanks!  



Friday, October 23, 2015

QST Error on Elecraft K3 Phase Noise Measurement CORRECTED


Wayne Burdick, N6KR, of Elecraft let us know that there was an error in the QST article about the KSYN3A Synthesizer Upgrade.  The original graph in the QST article showed an improvement in phase noise at close-in frequencies, but it also showed a significant worsening of the phase noise beyond 10 kHz.  THIS CHART WAS INCORRECT.    The Upgrade does, in fact, improve the phase noise performance as shown in the corrected graph above.  A corrected version of the article appears here:
 
Thanks for letting us know about this Wayne.  We have long been big fans of Elecraft and are proud that a picture of your KX3 appears on all of our blog pages under the headline "One of the Best Receivers in the World."

Pete and I will continue our study and discussion of phase noise;  as synthesizers make their way into more and more of our hombrew rigs it is important for us to understand the significance of this parameter.   

 

Thursday, October 22, 2015

November 2015 QST -- Wrist Radios, Phase Noise, and a 1958 BITX!


A Early BITX


I liked this issue.  Highlights:

Page 30.  Glen Popiel's article on the Arduino.

Page 33.  I know this may come as a surprise, but in spite of my admitted Ludite tendencies, I found the article on High-Speed Wireless Networking to be very intriguing.   

Page 38.  Hey!  Mike Aiello N2HTT has an article about an Arduino-based CW recorder.  FB Mike!

Page 54.  Review of LNR LD-5 QRP Transceiver. "The LD-5 is actually an SDR in a box with switches and knobs..."  They give a phase noise graph.

Page 58.  Review of Synthesizer upgrade for the Elecraft K3.  Uh-oh.  Phase noise again.  The review says the upgrade results in a reduction of phase noise, but the graphs seem to show an increase in transmitted phase noise on 20 meters as soon as you go 10 kHz from the transmit frequency.  I guess this is a tradeoff for a larger decrease in close-in (less than 1 kHz spacing) phase noise?  But if the objective on the transmit side is to deal with "a major problem with multiple operators in the same band segment in close proximity" resulting from transmitted phase noise,  is this a good trade-off?   Also, it would  have been interesting to know if the reviewer could detect -- by ear -- any improvement in the received signal.  

Wayne Burdick, N6KR, of Elecraft e-mailed us to let us know that there was an error in this QST article.  The original graph in the article showed an improvement in phase noise at close-in frequencies, but it also showed a significant worsening of the phase noise beyond 10 kHz.  THIS CHART WAS INCORRECT.    The Upgrade does, in fact, improve the phase noise performance.  A corrected version of the article appears here:
 
Here is the corrected graph:
 
 

Page 71.  My nightmare.  The WristRig.  The Apple Watch on 40 meters.  Sorry Steve, Dick Tracey did not have The Knack, and tackling the "Apple Watch challenge" is not an indication of "homebrew chops."  Software coding chops yes, but homebrewing is, for me, a different thing.   (But, as we always say, too each his own... And thanks to Steve for the interesting article. )

Page 82.  Ross Hull.  Very interesting article, especially the part about OM Ross's untimely death by electrocution.

Page 100.  "The Cosmophones" by Joe Veras.  Cool pictures (as always) from Joe.  And I loved the first lines:  "What in the world is a bilateral transceiver?  Byron Goodman, W1DX, posed that question in his June 1958 QST review of  the Cosmophone 35."    Wow, four months before my birth By Goodman was writing about BITXs in QST!

Tuesday, October 20, 2015

Homebrew Computers -- REALLY Homebrew Computers


Hackaday has an article today that is, for me, very timely.   In our last podcast, Pete and I were discussing the meaning of the word "homebrew" in the world of Software Defined Radio.  As always, Pete was closer to the cutting edge, while I remain mired in Ludite (one D please!) curmudgeonism, committed to RADICAL FUNDAMENTALIST HOMEBREWING.  No chips and no menus for me please.  

Today, the Hackaday guys came to my rescue with a blast from the past.  Homebrew computers!  Not that simple "buy a mo-bo and plug in some boards" stuff.   No, REAL homebrew, so HB that they even made their own components.  1968.  I can dig it!  I should have gone down this road.  I had the C.L. Stong book "The Amateur Scientist" IN MY HANDS. It had some great articles about relay-based computers.  I could have been rich! 

http://hackaday.com/2015/10/19/diy-computer-1968-style/

Sunday, October 18, 2015

HB2HB! N3FJZ-N2CQR Si5351 and BITX TIAs on Both Sides, with Some LBS and Peter Parker Circuitry Too!



In those dark days of February 2015, when all the members of the SDR ESSB Panoramic Spectral Police were on my case over some imperfections in my 40 meter homebrew SSB signal, Rick, N3FJZ came to my rescue by sending me a great YouTube video of his reception of my new rig.  Rick was using a wonderful homebrew Direct Conversion receiver with a really cool PTO.   Here is my blog post on Rick and his receiver:

Then, yesterday, I received this e-mail:


Bill, Pete,

I want to share my excitement with you.

After 32 years as a ham, I finally had my first ever HF QSO on October
16, 2015, and on a homebrew rig no less!  Oh the Joy of Emission!
It was on 7.242MHz, 8:00 a.m. eastern on the "Woodpecker net".
- Rig was based on the Bitx, using ZIA bidirectional amps.
- 20 Watts into a 80 meter full-wave loop up at 20 feet.
- 600 ohm homebrew open wire ladder line.
- Balanced antenna coupler inspired by the Annecke and Johnson matchbox
units.
- and most importantly, the Arduino controller software and use of the
Nokia display were derived and inspired from Pete's "Let's Build
Something" code presented on his website, and the carrier
oscillator(BFO) & L.O. are generated by an Adafruit SI5351 clock
generator board.  Thank you Pete.

See my N3FJZ look-up on QRZ.com for photos of my homebrew rig. I have
also put links to the SolderSmoke blog and to Pete's web page and blog.

I just want to tell you both that your podcasts, websites, circuit
diagrams and stories were a huge part of my success.  They were the
inspiration I needed on many dark days when my amplifiers would
oscillate, and my oscillators would simply smoke.  At times I thought I
would never get on the air, but an hour listening to SolderSmoke podcast
would give me the drive venture on.  Thank you!

***VERY IMPORTANT!!!!

Bill, during my first QSO, I was getting 5x8 and 5x9 signal reports
(with 20 watts!)from North Carolina, up-state New York, Michigan, and
Indiana, and I know we are only about 50 miles apart (I'm in north
central Maryland), so I believe we could probably achieve a successful
HB2HB contact if you want to try.

If you want to, and have the time, you could join me on the Woodpecker
net any Friday, Saturday or Sunday on 40 meters 7.242MHz 8:00 a.m.
eastern, or we could set-up a prearranged contact on a General class 40
meter frequency of your choosing.  Let me know - making an HB2HB
contact with you would mean the world to me.

Pete, I also extend this invitation to you as well, but with only 20
watts on my end, it may be a stretch, but we could try.

Thank you both again for the joy you have given me with your pod-casts.
73
Rick - N3FJZ
.................

Rick and I got together on 7.288 MHz yesterday evening.  It was a really amazing QSO.  Rick made a video of it (see above) and I recorded the audio on my side.  My old tape recorder didn't do Rick's signal justice -- it sounded better than this.  But here is the full QSO:


Be sure to listen closely at around 21 minutes when Rick describes a software feature that allows him to switch -- with the touch of a button -- from high side VFO to low side VFO.  The BFO frequency also changes to account for the resulting sideband inversion.  Very cool.

Rick's Digital Board

Ricks Rig as it was during our QSO
 
Crystal Filter

Rick's Dual HEXFET Power Amplifier
 
Check out the N3FJZ QRZ.com page for more info. 
 
CONGRATULATIONS TO RICK!  


Saturday, October 17, 2015

SolderSmoke Podcast #181 Of Dongles and DX-100s -- SDR vs. HDR, Music & Art, 2B, HB2HB, Noise, The Martian, VK3YE's New Book



Two RTL SDR Dongles in front of a DX-100 Transmitter

SolderSmoke Podcast #181 is available:


17 October 2015

-- Our audience IGNORES Pete's guitar intro!
-- Pete on QSO Today Podcast.
-- Part 97, The Radio Art and International Goodwill.
BENCH REPORTS:
-- Pete connects his new beam to the KX3.
-- Pete puts the Bell-thorn on 20.
-- Simple-ceiver update.
-- Pete's new drum machine: http://makezine.com/2015/10/15/learn-electronics-worlds-oldest-drum-machine/
-- Bill fights noise in the DIGI-TIA.
-- Bill fights power-line noise (and wins!).
-- Drake 2B, skirts, reduction drives, and tuning rates.
-- Warming up (with!) the DX-100.

-- N2CQR -- N6QW  First Ever HB2HB QSO.

-- On 40 AM with an HT-37
-- Listening to Chinese CubeSats.
-- SDR Dongle as a bandwidth checker.

-- SDR and the Future of Homebrew Radio.

-- Bryan's LBS Receiver.
-- Dean's First Ever QSO with his HB rig.

-- 32 Mighty Mites Completed

-- The Martian -- Did Mark Watney REALLY have the Knack?

-- MAILBAG:
Peter Parker's New Book
Sparks from Ron Sparks
Armand's 1Watter
Rogier's  pyro machine
BIG boxes from Tim KI6BGE
Mikele's ZIA and N6QW rig collection
SPRAT 141 and SPRAT 164

Friday, October 16, 2015

Dean's TIA Transceiver with Si5351 (Video)



Nice work Dean!  With this rig, Dean recently had his first ever ham QSO.  FB OM.

A Message from South Africa



Hi Bill,
 
I am Pieter callsign ZS3AOR. I came upon your E-Book at Amazon and downloaded it to my Kindle and man, I really enjoyed reading about your endeavors with everything.
 
The way you explained for instance the inner workings of transistors and mixers and problems associated with it is really  good.
 
Subsequently I downloaded the August Podcast and I am hooked with you and Pete.
 
Kind regards from the Namaqualand region of South Africa (Northern Cape Province)
 
Pieter  ZS3AOR
 
 
 
Pieter's Workbenches

Thursday, October 15, 2015

HB2HB -- Homebrew Rigs on Both Sides of the Contact


As I've been saying on the podcast, contacts in which both operators are using homebrew gear are increasingly rare, especially on SSB, and especially, it seems, in the USA.  So let's chronicle these rare events.  I've started a Label here on the blog called HB2HB.   Send me reports of good HB2HB contacts -- recent or past -- and I'll try to get them onto the blog. 

I've already described my recent QSO with Pete, N6QW.   My second HB2HB from this location took place on 12 October 2015.   I talked to Jeff GW3UZS in Cardiff, Wales on 17 meters.  I was using my trusty BITX17.  Jeff was running a much more sophisticated homebrew rig -- see above.  More details on Jeff's beautiful rigs are on his QRZ.com page"

https://www.qrz.com/db/GW3UZS

So send in HB2HB reports.  These contacts are almost in "endangered species" category -- they deserve to be preserved!

Wednesday, October 14, 2015

A VERY Quiet Shack, 4850 Feet Below the Surface



Michael Rainey's underground shack in Vermont is undeniably cool, but these folks have REALLY gone deep.  They are almost a mile down, blocking out that nasty cosmic ray QRN, building sensitive detectors to QSO with some extremely elusive DX:  DARK MATTER. 

SEE IF YOU CAN SPOT THE TEK 'SCOPE.

Wonderful video.  Thanks to Ira Flatow and Science Friday.
Designer: Douglas Bowman | Dimodifikasi oleh Abdul Munir Original Posting Rounders 3 Column