Just go to http://soldersmoke.com. On that archive page, just click on the blue hyperlinks and your audio player should play that episode.
http://soldersmoke.com
SolderSmoke Podcast #190 is available: http://soldersmoke.com/soldersmoke190.mp3 Pilgrims' Progress: Inspiring words from G3RJV BENCH REPORTS on JUNKBOX RIGS: Pete describes his beautiful 40 meter blue transceiver (video above) Bill describes his "Armand HROish" receiver BANDSWEEP! Bill needs small (yellow slug) 455 kc transformers. We need a good user-friendly 40673 SPICE model. SEND US YOUR BENCH REPORTS! The BD139 transistor Ferrite Core Matching Transformers QSO Reports: Getting on the air with HB rigs Bill's new FeelTech Signal Generator
And I see there are August and September 2016 editions available in the Files section (KI6DS) of the qrp-tech Yahoo group. Did I see articles there from Steve "Snort Rosin" Smith?
More amazing low-cost test gear from China. Elisa gave me this device on the occasion of my completing another solar orbit. Amazing capability for less than $90. The video above gives you a good sense of what this thing can do. I have already had success with the freq generator function. The frequency counter also works great. The sweep function looks very useful for filter checking. And the ability to generate square waves at different phase relationships will be very useful in phasing receiver and transmitter projects. This little box should help me eliminate a lot of clutter on the work bench.And it looks good next to the Rigol 'scope.
They come with a variety of different brand names: I ordered a Jinwen but got a FeelTech. They are obviously the same device. Be sure to begin your Amazon shopping on the Amazon search link on the SolderSmoke blog (upper right).
George KJ6VU is a long-time supporter of the SolderSmoke podcast. He has recently teamed up with another ham and launched a podcast called "The Workbench." This morning I listened to Part I of their interview with the legendary Alan Wolke W2AEW. It was great. As I was listening to Alan I was soldering together a crystal filter for my new receiver, and using my RIGOL 'scope to check the results. I liked Alan's description of how they made images of 'scope patterns in the days before the advent of Digital Storage Scopes (Polaroid!). I also liked Alan's scorn for those who use the "Auto" switch on the 'scopes. The host's reaction to Alan's description of a $300,000 Tektronix 'scope was also fun: "For that price I want to be able to drive a car into it and put a swing set behind it!" Indeed. Recommended listening: http://hamradio360.com/index.php/2016/08/30/ham-radio-workbench-5-oscilloscopes-part-1/
"SolderSmoke -- Global Adventures in Wireless Electronics" is now available as an e-book for Amazon's Kindle.
Here's the site:
http://www.amazon.com/dp/B004V9FIVW
Velocity factor measurement
-
A frequently asked question is how to measure transmission line velocity
factor. The wide adoption of the NanoVNA has spurred these questions. So,
it is go...
Re: 75A4
-
Joe:
I have one of those 1K fiber optic widgets with screen and capture
capability.
I will try to fire it up and get you a close up view. No promises.
ICOM hint at new 60th anniversary X60 product
-
At the Dayton Hamvention this weekend, ICOM put on display are number of
printed circuit boards from what is supposed to be the 60th Anniversary
Concept ...
May 17, 2024. Caveat Emptor
-
Any blog readers own one of these jewels? It is the uSDX, an Arduino +
Si5351 driven SDR transceiver.
This particular unit was hand built by me about 3 ...
Moorabbin Radiofest
-
The Moorabbin RadioFest was a terrific show this year. The turnout looked
good to me although I'm told it was down on past years.It was great to see
a vend...
Broadcast Band AM Radio
-
See the YouTube series for more information:
http://www.youtube.com/c/CharlieMorrisZL2CTM
Buffer Amplifier
Low Pass Filter
IF Ampli...
An Inline RF Step Attenuator for QRPp Work
-
I don’t need to explain the attraction of low power operation; if you’re
reading this, the chances are that you are already a convert. I’ve been
operating ...
A 51S-1 Restoration Story
-
I came across my Collins 51S-1 in a big junkyard in Ankara, Turkey around
2012. It was in a pile with a lot of other electronic scrap, probably from
one o...
New QRP Cluster Online From OM0ET and OM6APN
-
By DX EXPLORER
DX EXPLORER
Paul OM0ET and Peter OM6APN recently launched a new cluster dedicated to
QRP operations. Have a look and I hope you will enjoy...
3D Printing The Hadley 114mm Newtonian Telescope
-
Yes, we’re building a 3D Printed Newtonian Telescope called Hadley. It’s
being printed in PETG and in the video below, I give a quick tour. My build
isn’...
3D printed project boxes
-
I have been busy with some other things that have kept me away from
electronics projects for quite a while. Now I can get back to them, but
realize I n...
Daylight Again – An all Analog Radio
-
What’s all this? In 10 seconds, A high performance, 7MHz, 5 watt SSB rig
Draws just 24 mA of current 90 dB dynamic range, 80 dB close-in dynamic
range 3D ...
Adding Enclosure to your sBitx Boards Order
-
The early buyers of the sBitx board set who bought it for $270 USD might
want to also add the enclosure (box) for in the kit. What you will now get
is a f...
Digi-chirp! Digital synthesis of ‘nostalgic’ CW
-
The bottom ends of 80, 40 and 20m are not what they used to be. For
starters, the busiest part is the digital segment where computers talk to
computers – l...
-
A Simple Speech Processor
(For QRP/SSB Homebrew Transceivers )
Over the last few weeks I had been thinking to build a small AF speech
processor to add to...
A New Look for your uBitx!
-
Adding a "Cool Blue" Display to your uBitx!
The standard "green background" with black lettering frequently reminds me
that I suffer from Chronic seasickn...