Podcasting since 2005! Listen to Latest SolderSmoke

Monday, September 4, 2023

SolderSmoke Podcast #248 -- Back from the Summer -- Spurs and Filters, S-meters, 6BA6 mania, Shirtpocket rigs, MAILBAG

The PsssT Kit, coming soon from Mostly DIY RF

SolderSmoke Podcast #248 is available for download: 

Audio: http://soldersmoke.com/soldersmoke248.mp3

Video: (800) SolderSmoke Podcast #238 -- Spurs and Filters, S-meters, 6BA6 mania, Shirt-pocket rigs, Mailbag - YouTube


Travelogue:  Trip to the Dominican Republic 3-9 August.  Thinking about the M0NTV video on mixers...  

Solder Smoke Shack South is almost done.   I am thinking about workbenches, operating tables and antennas.  How high should an electronics workbench be?   Table height?  Or workbench (woodwork) height?  

My son and I went to see "Oppenheimer"  Trinity test scene very cool.  They wanted to see if the gadget would work! 

Is the SolderSmoke blog completely archived on the WayBack Machine?  Please check and let me know.  Thanks. 

Bill's Bench: 

-- I've been working a lot of DX with the homebrew rigs:  Indonesia, Australia, Japan, Hawaii.  Lots of fun.  15 meters has been especially good. But the rigs still need work: 

-- M0NTV's video got me to put TinySA to work.  I found that output from dual banders could be improved.  Spurs and harmonics. Yuck.  I need more TinySA -- ordered the TinySA Ultra. 

-- Allison KB1GMX helped a lot.  EB63A amp was unstable, especially on 10 meters.  Higher frequencies are harder!  Tightened up shielding, negative feedback, and bypassing.  This all helped, but I found that I needed to take the higher frequency LP filters out of the amplifier box.  W3NQN filters are better, with steeper skirts and better 2nd harmonic rejections. NanoVNA proving very useful. https://www.gqrp.com/Datasheet_W3NQN.pdf

-- Also worked on the Bandpass filters for these rigs.  Farhan's comments on skirts of different filter configurations.  Some are "LSB" filters (with steeper skirt at the highest freq) and some are "USB" filters (with the steeper skirt at the lower frequency)  See diagrams on the blog page. So I built USB new filters for 12 meters and for 10 meters. 





-- Danger that my unshielded wooden box rigs might be inviting feedback.  So I shielded the 1510 rig with copper guitar amp tape (conductive adhesive).  Good stuff.  

-- Phase Noise rears its ugly head again.  See blog posts. 

----------------------

SHAMELESS COMMERCE DIVISION:  

Mostly DIY RF getting ready to release PsssT kits.  Target date:  December 18, 2023 (E Howard Armstrong's birthday).  https://mostlydiyrf.com/

Amazon Search box seems to have died.  I can't get it back.  Can anyone tell me what happened?  (There seems to be "explanations" from Amazon about this, but they are written in a strange language that I cannot follow.)  Something similar happened with the Google Ads on this blog page.  Apparently you can't have ads both on YouTube and blogger.  

But hey, there is Patreon for those who want to support the podcast and blog. 

-------------------------

Pete's Bench

An S-meter for Bill? 

6BA6 Mania! 

QRP SSB with 6BA6

Shirtpocket rig re-build

Mailbag: 

Walter KA4KXX has a great article about homebrewing in the September 2023 QCWA Journal.  

 Steve KC1QAY -- Has joined the CBLA.  I sent him a 3579 crystal.  He built a MMM and experienced JOO.  And Allison KB1GMX is in his local radio club.  TRGHS. 

Ajay VU2TGG in Pune, India -- launching a high school receiver effort. 

Denny VU2DGR The Wizard of Kerala: https://soldersmoke.blogspot.com/2023/08/the-wizard-of-kerala-india-denny-vu2dgr.html

Joe VK4BYER working with kids a remote Australian community.  FB. 

Todd K7ZF -- Wants to get into homebrewing. Advised him to start small. 

Dean KK4DAS:  Fixing Hallicrafters Worldwide RX. Ciudad Trujillo!  Got question from Mark in the VWS Makers Group:  HOW DOES Michigan Mighty Mite REALLY Work.  See blog. 

Trevor Woods -- Info on Super Islander Mark IV made in Cuba from old CFL bulbs.  FB. 

Bob KD4EBM sent me some great stuff:  Sony SW receiver,  QCX Mini.  Made a CW contact with the QCX.  Felt virtuous -- it is going to the DR.  Thanks Bob. 

Peter KD2OMV:    One of the guys I worked with the ET-2 transceiver.  Great to hear from him. 

Armand WA1UQO   Richmond area radio museum? https://www.youtube.com/watch?v=BSCmljje1p8

Mike WN2A -- Sent me a great care package with lots of toroids.  A lifetime supply!  Thanks Mike!

Nate KA1MUQ got his Doug DeMaw receiver going after 38 years!  FB.  Been there, done that! 

Tony: G4WIF Liked Valveman video about Gerald Wells.  He visited him! https://soldersmoke.blogspot.com/2023/08/valveman-story-of-gerald-wells.html 

Dean KL7MA  Bill talked to him on 15 SSB.  He had worked Wes W7ZOI!  FB! 

Monday, August 28, 2023

But How Does the Michigan Mighty Mite REALLY Work?

Dean KK4DAS and I were talking to Mark, a new homebrewer.  After we sang the praises of the Michigan Mighty Mite,  Mark asked us a good question:  How does it really work? 

I guess the starting point for analysis is the Barkhausen criteria (that Pete N6QW taught us):  essentially you need enough feedback to overcome losses in the circuit, and this feedback has to be in phase with the signal at the input.  The MMM is clearly oscillating, so the question becomes, "How does this very simple circuit meet the Barkhausen criteria?" 

Here goes: 

Even though it is a very simple circuit, it is worthwhile to separate out the things that it has to do: 

1) It needs to set the AMOUNT of feedback.    This is done by the tap on L1.  Too low down on the coil, and it is too close to ground through the .05 uF capacitor (not enough feedback).  Too high on the coil and you get too much feedback.  This is like an inductive voltage divider. 

2)  It needs to make sure that this feedback is in phase with the input signal. Positive feedback. Q1 is an inverting amplifier.  So it supplies 180 degrees of phase shift. As the signal at the base goes more positive, the signal at the collector goes more negative, and vice versa.  But we need an additional 180 degree shift to bring the output signal in phase with the input signal.  Here is the key:   The crystal provides the other 180 degrees of phase shift.  See


I tested this:  A 3.579 MHz crystal does provide the needed phase shift:  It introduces a shift of about 190 degrees.  Check out this very cool picture. The two scope probes are looking at the input and the output of the 3.579 MHz crystal with 3.580 MHz frequency coming from my HP sig gen. 

Click on the picture for a better view.

3) It needs to filter out other signals -- the 365 pf variable cap resonates with L1 at around 3.579 MHz.  This results in maximum circulating current through L1 at this frequency. 

4) It needs to match impedance to the antenna.  L2 wound over L1 forms the secondary of a transformer and efficiently moves the energy from the MMM to the antenna.  Think about the gears on your bike. 

The 10k resistor biases the base of the transistor, keeping it on.   The 27  ohm resistors limits the current through the transistor, preventing it from burning up. Note:  the 27 and 10k resistors should NOT be connected directly to each other.  There is no dot in the schematic. This causes some confusion among builders. 

The .05 uF capacitor does two things:   It grounds the L1/365pf tank circuit for RF (but not for DC).   It is less than 1 ohm at 3.579 MHz.   And it helps reduce (smooth out) key clicks (very sudden on-off changes in the oscillation). 

Wednesday, August 23, 2023

Homebrew Transistors


Hang your heads in shame, my friends.  This dude is getting ready to homebrew his own transistors.  None of that store-bought stuff for him.  He is a few steps away from breaking free of the GLOBAL TRANSISTOR CARTEL that has been abusing us so-called "homebrewers" for so many years.   This guy really puts the home in homebrew. 

Plus he has a seriously cool shop enabling him to do some excellent metal and chemical work.  

Thanks to Hackaday for alerting us to this. 

Sunday, August 20, 2023

15 Meter Homebrew SSB Rig As Heard in Mexico City

 19 August 2023. Ralph XE1RK recorded part of our QSO and played it back to me. Thanks Ralph!

I was running about 75 watts to a hex beam aimed Southwest.

Saturday, August 19, 2023

Valveman -- The Story of Gerald Wells


Don't be deterred by the annoying test patterns at the start of this video.  Just skip past them.  The rest of the video is quite good.  Or you could just click on this link and avoid the first 83 seconds of test pattern:  https://youtu.be/Y8w6iwaAGJ4?t=83

Gerald Wells has been mentioned on this blog before, but I don't think we've ever presented the full documentary on this fellow.  Here it is.  Gerry is clearly one of us: a radio fiend, obsessed (as he admitted!) with wireless, a victim of THE KNACK.   

George WB5OYP of the Vienna Wireless Society got to meet Gerald Wells and visit his museum. George alerted me to this video.  Tony G4WIF also was able to visit Gerry and his museum. 

The documentary is full of interesting stuff, and is, in itself, a Knack Story.  Wells mentions the Crippens murder so well described by Eric Larson in "Thunderstruck."  It was this crime that brought radio to the center of public attention.  

More Ancient Technology Keeping Space Missions Alive


 https://www.bbc.com/future/article/20230815-the-ancient-tech-keeping-space-missions-alive

Three cheers for software.  Really. 


Wednesday, August 16, 2023

Working Indonesia and Chile with new 15-10 Homebrew Transceiver


Conditions were good this morning, and the Radio Gods continue to favor homebrew rigs.  I got on 15 meters SSB with the new 15-10 dual bander and quickly worked YH0AD in Jakarta (about 10,000 miles).  A few minutes later I talked to YB2MVD; he was a bit further east on Java.  I shot a video of the QSO with YB2MVD.  He said I was 59.  

I then switched to 10 meter SSB (same rig) and worked CE4PS in Chile (5,000 miles).   

TRGHS. 

The antenna for all these contacts was my K4KIO Hex Beam.  I was running about 75 watts from the .1kW CCI amplifier. 


Tuesday, August 15, 2023

The Wizard of Kerala (India) -- Denny VU2DGR -- SDR and HDR

 
His signal was just booming in on 20 meter SSB yesterday evening.  It was one of the strongest signals I've heard from India.  I wasn't able to get through the pileup, but I heard mention of a homebrew station at his end...  Sure enough a look at his QRZ.com site shows that a LOT of solder has been melted in his shack.  Both SDR and HDR stuff.  Tube projects including an 807 amplifier made from "components collected from the scrapyard." And a homebrew 20 meter Moxon.  Check it out: 


FB Denny!

Kerala is on the southwest tip of India.  It is something of a hotbed of technological innovation.  My only Indian contact using my current series of homebrew dual-banders was with VU3TPW -- Renju is also in Kerala. 

Monday, August 14, 2023

You have heard of the International Geophysical Year (IGY). But have you heard of the IQSY?

 

International Quiet Sun Year.  1964-1965.  Yes, that was a thing.  

Tuesday, August 1, 2023

Voyager, Canopus, JPL, and 74xx Logic Chips from the early 1970s


"So somewhere out there in interstellar space beyond the boundary of the Solar System is a card frame full of 74 logic that’s been quietly keeping an eye on a star since the early 1970s, and the engineers from those far-off days at JPL are about to save the bacon of the current generation at NASA with their work. We hope that there are some old guys in Pasadena right now with a spring in their step."

https://hackaday.com/2023/07/31/just-how-is-voyager-2-going-to-sort-out-its-dish-then/


Sunday, July 30, 2023

Understanding Maxwell's Equations (video)


And you should also look at the accompanying web site: 

Writing about the equations, the author notes, "They are formidable to look at - so complicated that most electrical engineers and physicists don't even really know what they mean.  This leads to the reason for this website - an intuitive tutorial of Maxwell's Equations. I will avoid if at all possible the mathematical difficulties that arise, and instead describe what the equations mean. And don't be afraid - the math is so complicated that those who do understand complex vector calculus still cannot apply Maxwell's Equations in anything but the simplest scenarios. For this reason, intuitive knowledge of Maxwell's Equations is far superior than mathematical manipulation-based knowledge. To understand the world, you must understand what equations mean, and not just know mathematical constructs. I believe the accepted methods of teaching electromagnetics and Maxwell's Equations do not produce understanding. And with that, let's say something about these equations.

Thanks to Armand WA1UQO for sending me the wonderful book about Faraday and Maxwell that put me -- once again -- on the path toward a deeper understanding of their work.  

Designer: Douglas Bowman | Dimodifikasi oleh Abdul Munir Original Posting Rounders 3 Column