Just go to http://soldersmoke.com. On that archive page, just click on the blue hyperlinks and your audio player should play that episode.
http://soldersmoke.com
I was recently commenting to Pete that I could use some gear that would give me a better means of checking the bandwidth of my transmissions. Pete. pointed to the latest issue of our much-loved SPAT magazine. Indeed on SPRAT 165 (Spring 2015) there is an article by Ken Marshall G4IIB on how use the RTL2832u R820T DVB-T "dongle" (USB stick) as an SDR receiver. I sent 13 dollars to Amazon. The device arrived yesterday. I followed Ken's instructions and soon I had the little device inhaling on 12 meters. It is really amazing. Lots of technology in a little box the size of your thumb! I use it with the free HDSDR software and have been listening to 12 and 10 CW and SSB. See the video above. Tomorrow I will attempt Ken's mod that will open up the other HF bands. Then I will be able to put to use a second SPRAT article about this device : Also in SPRAT 165 Tony Fishpool G4WIF describes how to use this device as a rudimentary indicating instrument for bandwidth measurements.
Great stuff. Get yourself one of these devices. You will in effect be getting an all-band all-mode computer controlled receiver for $13 !!!!!!!!!!!!!!
Bill A couple more things you can do with the "Dongle". I have used SDR# and the Plugin frequency manager and scanner I set it up to scan all the local repeaters. Available at http://sdrsharp.com The SDR software is limited in the bandwidth width you can scan at one time, this works great as a receiver or as test equipment for looking at the output of transmitter stages. But there are times you want to look at a wider band, such as checking for harmonics. There is a Python program RTL Scanner that do wide bandwidth sweeps. http://eartoearoak.com/software/rtlsdr-scanner With a 100 Mhz. up-coverter, input step attenuator , and good shielding you have a usable spectrum analyzer for the HF bands. If you can bring the receive IF signal out of your transceiver, it makes a nice panadapter. DuWayne KV4QB
Dave’s review of the Sangean ATS-909X2
-
Many thanks to SWLing Post contributor, Dan Robinson, who notes that Dave
(N9EWO) has posted his review of the Sangean ATS-909X2. Click here to view.
I mus...
An RF-Quiet LED 'Fluorescent' Bulb
-
I recently had the *fluorescent bulb* in one section of the under-cabinet
kitchen counter lighting fixture go dark. This wasn’t too surprising as...
BITX40 Rebuild Progress Report, MiscDotNews
-
In this post we’re going to catch up with what’s been going on over here at
MiscDotGeek and explain the gap in posts lately. We’ve been busy, and some
of...
SP-X, a pocket rig for the CW activator in a hurry!
-
I’ve long been interested in compact and fairly minimal SSB and CW rigs
with good performance. I’m not into bells, whistles or menus. Menus are for
restaur...
Instrument storage boxes updated
-
While getting some equipment off a shelf I knocked some thing down and they
landed on a nanoVNA, cracking the screen.
I think it is time to make some ...
Yet more new AVRs
-
In a previous blog I mentioned the new atmega4809 and AVR128DA parts. Well,
it seems I missed two other new families, the AVR128DB and AVR128DD series.
I’v...
Re-engineering my 1st “Shirt-pocket” transceiver
-
When the project of building a very small transceiver was accomplished 4
years ago, I still lacked lots of skills in setting up electronic circuits
using S...
-
A Simple Speech Processor
(For QRP/SSB Homebrew Transceivers )
Over the last few weeks I had been thinking to build a small AF speech
processor to add to...
Modifications to the Dayton/FDIM-2019 Antuino
-
The Dayton Antuino has sub-optimal performance. This is a short note on
improving it to an 80 db range of measurements. The trouble with Antuino
2.0 (the o...
A New Look for your uBitx!
-
Adding a "Cool Blue" Display to your uBitx!
The standard "green background" with black lettering frequently reminds me
that I suffer from Chronic seasicknes...
Bill
ReplyDeleteA couple more things you can do with the "Dongle".
I have used SDR# and the Plugin frequency manager and scanner I set it up to scan all the local repeaters.
Available at http://sdrsharp.com
The SDR software is limited in the bandwidth width you can scan at one time, this works great as a receiver or as test equipment for looking at the output of transmitter stages.
But there are times you want to look at a wider band, such as checking for harmonics. There is a Python program RTL Scanner that do wide bandwidth sweeps.
http://eartoearoak.com/software/rtlsdr-scanner
With a 100 Mhz. up-coverter, input step attenuator , and good shielding you have a usable spectrum analyzer for the HF bands.
If you can bring the receive IF signal out of your transceiver, it makes a nice panadapter.
DuWayne
KV4QB
Search R820T2 on Aliexpress, they sell for less than $8
ReplyDelete