Bob K2BVR's FB SolderSmoke Direct Conversion Receiver

Bob K2BVR homebrewed a really nice SolderSmoke Direct Conversion receiver.  On his "Proof of Life" video we hear some nice SSB signals, some great CW signals (including N7DZ/6 POTA) and even the well-known tones of FT8.  FB Bob.  Congratulations OM!  Welcome to the Hall of Fame. 

Bob writes: 

Hi Bill,

I wanted to send you a quick note of thanks. I’m very grateful to the SolderSmoke Discord users for their help, and to you and KK4DAS for all of the work you’ve both done in developing this project and sharing it through your videos.

I’ve been making progress on my build and thought I’d share a little update. I ran into some challenges with the bandpass filter – it turns out that reducing the trifilar winds per inch helped improve the performance. I also fought with a shorted test fixture along the way, which made things more confusing than they should have been.

On the audio side, my first amplifier module is still giving me trouble. I hated not getting it fixed right away, but I’ll be coming back to it. I did have to add a 470uF cap to the power rail to control oscillation but I haven't added the 220 ohm resistor. I’m thinking about putting the different modules into their own boxes so that I can experiment with them more easily in the future.

Thanks again for all of the inspiration and guidance — I really appreciate it.

73s

K2BVR