VK3HN's Amazing Summit Prowler 9 Homebrew Transceiver - A Masterpiece of Miniaturization (VIDEO)

I was wondering what Paul VK3HN was up to. Now we know: the Summit Prowler 9 transceiver. 

This is yet another amazing rig by Paul, with GREAT documentation.   

I was impressed by those bandpass filters.  I will try to do something similarly robust on my 17/12 rig. 

Paul's miniaturization of this rig is really astonishing.  I would go nuts trying to keep it this small. I just couldn't do it. 

Look closely at the boards he uses.  They look like printed circuit boards, but with all the components and all the soldering on one side.  This is very smart -- this makes it easier to troubleshoot and to change components.  

I was glad to see at least one NE-602 in there.  FB. 

The video is above.  Check out Paul's blog for more info: 

https://vk3hn.wordpress.com/2021/02/27/sp-9-a-compact-five-band-ssb-cw-qrp-transceiver/ 

Thanks Paul!

Split Stator Temperature Compensation Also Used in Yaesu FT-101

The eagle eye of VE3EAC spotted this (he also correctly pointed to a tiny broken "tine" as the cause of my  HP8640B woes).   I had missed the temp comp circuit.  Inside the Yaesu FT-101 VFO box that I used in my Mythbuster rig, there is a split stator capacitor and two temperature compensation caps similar to that recently described by Mike WU2D.  Very cool.  You can see the temp compensation cap in the picture (above). The red arrow points to the split stator cap,  the blue arrow points to to the two temperature compensation caps attached to it. You can see them all in the schematic below(in the lower left of the schematic). 

Old Military Radios at the Air and Space Museum Udvar-Hazy Center, and Autogyros

 

My son Bill and I were out at the National Air and Space Museum's Udvar-Hazy Center (out near Dulles Airport, where they display the really big stuff).  We spotted these old military radios.  The ARC-5 Command sets caught my eye.  Of course I was thinking about the great VFO parts inside those boxes...   The acknowledgement of the ARC-5's contribution to ham radio (on the card) was nice. 

 They also have an ART-13 on display.  

We had a lot of fun looking at all the planes.  We were especially impressed by the Autogyros. 

The Bensen B-6 Gyroglider seemed to be really pushing the envelope (of good sense!).   This was a an Autogyro with NO MOTOR.  It was towed!  No license required as long as you didn't release the tow line.   Note that it was designed in 1954 to introduce teenagers "to the thrills of flight at minimal cost." The headgear and goggles were key.  And the kit was only $100! 

An Analog LC VFO for my 17/12 Meter SSB Transceiver (VIDEO #1)

Here's my initial work on a VFO for my 17 meter -- 12 Meter Single Conversion Dual Band SSB Transceiver. The IF (crystal filter) will be at 21.4772 MHz. On 12 meters the VFO will run from 3.5128 to 3.4528 MHz. On 17 the VFO will run from 3.3092 to 3.3672 MHz.

The transistor I am using is an SK3050 Dual Gate MOSFET. I bought a bunch of these years ago in a panic when I heard that 40673's were getting scarce.

I forgot to mention another important reference: Joe Carr's Popular Electronics VFO articles:

https://soldersmoke.blogspot.com/2017/04/vfo-tribal-design-wisdom-from-joseph.html

Thanks again to Dale K9NN for the bags of NP0 capacitors. And to Pete N6QW for the suggestion on the HT-37 main tuning cap.   Thanks to Mike WU2D for the great VFO videos, and to Frank Harris for his wonderful book on homebrewing.  And we can't forget the great reference books that guide so many of our projects: Solid State Design for the Radio Amateur and Experimental Methods in RF Design -- thanks to Wes Hayward W7ZOI and all of his co-authors.  

Boxing it Up: Tribal Knowledge from Pete N6QW on How to Make Enclosures for Homebrew Rigs

 

http://n6qw.blogspot.com/2022/02/2022-return-to-peashooter-build.html

Thanks Pete!  

Pete's Eclectic Approach to the Pea Shooter, San Jian counters on Analog VFOs, Non-Restaurant Menus

I liked Pete's comments on the various (analog, digital, mixed) approaches to homebrew: 

http://n6qw.blogspot.com/2022/02/2022-return-to-peashooter-build.html

http://n6qw.blogspot.com/2022/02/2022-peashooter-20m-compact-ssb.html

I too have San Jian digital counters watching the stability of analog VFOs (DX-100, HQ-100, Mythbuster). 

Variety is the spice of life!  

I also liked Pete's comment about the fellow who does on-the-air menu counseling for FTDX-3000 owners.  I sometimes run into guys on the air who want to do something similar with my simple homebrew rigs.  They start by making comments about my audio -- they will usually say it is "too high" or something like that.  Especially when I'm using the separate transmitter and receiver (which have to be "netted" imprecisely by ear), I have to explain that maybe resort to their RIT control would help.  If they persist, I sometimes have to tell them that how my rig sounds depends A LOT on the placement of the carrier oscillator relative to the passband of the crystal filter (most recently, the filter from the 1963 Swan 240).  Most of them have never had to do that kind of adjustment, so the "technical discussion" usually ends at that point, with my interlocutor saying 73, and presumably moving on to someone whose rig has menus to fiddle with.  (Recently heard audio techno term: "massaging the codec.") 

To each his own!    

A Thermatron (and Asperger's) Knack Story

Heroic stuff.  In more ways than one.  FB Mark.  

 https://www.aane.org/over-and-out/

How The Physics of Resonance Shapes Quantum Reality

Here is an interesting article that appeared in Wired.  It will resonate with many SolderSmoke listeners!

https://www.wired.com/story/how-the-physics-of-resonance-shapes-reality/#intcid=_wired-bottom-recirc_972910f0-7b0e-4a47-84bf-3a375ead6667_text2vec1-reranked-by-vidi

Differential Temperature Compensation Capacitors in the Hallicrafters HT-37 Main VFO Tuning Circuit

 

I've been watching with great interest Mike WU2D's excellent series on VFO construction.  His second video is especially interesting because he talks about how we can use a split stator differential capacitor to build a temperature compensation circuit that will allow us to "dial in" the proper amount of temperature compensation.  

The heart of this circuit is the split stator differential capacitor.  The stator is split; but there is a common rotator. As the rotator moves, the capacity across one part of the capacitor increases while the other part decreases -- thus the total capacity remains unchanged.  If we connect two capacitors of the same capacitance BUT OF OPPOSITE TEMPERATURE CHARACTERISTICS -- we can use this split stator cap to select just the right amount of temperature compensation.   Very cool.  Even cooler:  Mike actually built a split stator differential capacitor.  That, my friends, is dedication. 

I was sitting here this morning thinking about all this when it occurred to me that right in front of me was a capacitor that might be relevant to all this (see above).  I bought it on e-bay one year ago after Pete N6QW had alerted me to it.  It is the main tuning capacitor from an HT-37 transmitter.  What attracted us was the big anti-backlash mechanism.  But now I realized that it had another charming feature.  

Looking at it a bit more closely I saw a split stator differential cap just like the one that Mike had made.  Attached to the two rotors were two tubular capacitors.  The three caps are in parallel with the main tuning cap.  Bingo -- this is a temp compensation circuit.  

I checked the HT-37 manual.  The manual says that temp compensation is set at the factory.  OK.  But the schematic does not show the split stator caps and the two tubular caps (see below).  Could it have been that this circuit was added later perhaps to address drift? (We do see it in the HT-32B schematic -- see below.)

HT-37 VFO SCHEMATIC

Anyway, it was very cool to find this example of the circuit Mike was discussing.  In the photo at the beginning of this post you can see the three caps.  Below you can see the split stator cap in the background. 

In the comments a reader points out correctly that this circuit was discussed in the ARRL book "Single Sideband for the Radio Amateur."  Indeed, it is on page 51 of the 1970 edition, ARRL  gave credit for the circuit to Hallicrafters: 

HT-32B VFO Circuit

Joe Carr K4IPV (SK) also discussed this circuit.  In his article in Popular Electronics in August 1993, he too gave credit to Hallicrafters.  Carr also gave some detailed instructions on how to use the circuit to stabilize a VFO.  See pages 78 and  79 of the August 1993 Poptronics: 

https://worldradiohistory.com/Archive-Poptronics/90s/93/PE-1993-08.pdf

Podcast (Audio) Version of Bill's Talk to the L'Anse Creuse Amateur Radio Club

Tony G4WIF suggested that I make this talk available as an audio recording.  Good idea. Here it is: 

http://soldersmoke.com/N2CQRHomebrewing.mp3