SolderSmoke: On Sale on Thai Beaches!

An interesting e-mail from Thailand arrived this week. Excerpts:

Hi Bill Now for the full story

Life was so uncomplicated and peaceful before soldersmoke!

Last October I was lying on the beach in Pattaya City Thailand. I was just lying there enjoying a cold rice beer watching the various peddlers trudging along the sand. I wasn't bothering anyone and thought I was enjoying my retired life style. (Little did I know what was about to happen). Casually the wife reminded me there was a Ham club meeting in about three hours, I should hold off on another beer. Ok, I'll manage till later.

Pattaya Thailand has a great little Ham Radio club with locals from all parts of the world enjoying the one universal hobby without boundaries.

We showed up at the meeting on time and found a nice corner table. ( now the plug for the club - the meetings are the Friday after the first Sunday of every month and are held at Jimbos Bar). After about an half a beer a friend from England wandered over and sat next to me. He produced a CD from his pocket and said is was SolderSmoke, would I like to buy a copy for 100Baht. (approx. 3.00US) . As with most normal people, my first question was, what is soldersmoke? This was my first big mistake. I should have said not interested and looked for other friends that were arriving. But, no, I had to ask what was SolderSmoke.

My friend tried to explain, but feel short of being able to fully relay the meaning of the word SolderSmoke. If I remember correctly there were episodes 1 thru 80 something. I took the CD back to my house. and the next day spent over 5 hours glued to the CD player. My world was beginning to crumble.

I listened to more episodes. and started to think in terms of QRSS, QRPp, long wires etc. This new terminology was fascinating. I grew up in Idaho and was first licensed in 1963. I still have my first rigs that consisted of a Hammarlund HQ-100 and a Knight Kit T-60. I apparently had the knack at age 13 or so, but didn't know what it was called then. hi hi

In a couple of SolderSmoke episodes there was mention of a Drake 2B, a great receiver in all respects. I found myself wanting one (I sure didn't need one), and looking every where. I bought one in great condition with the original for sale tag still on it. It even had the crystal calibrator installed.

Now my vocabulary has expanded to whisperers, grabbers, mickums, reggies, knights of the realm and other terms before unknown to my vocabulary. Fessenden was a terrific individual although I'd never heard the name before episode 90 something. I started to build a QRSS beacon. I am in constant contact with Michael Rainey , AA1TJ. He is a great guy and has helped with a lot of questions.

For the first time in several years I am involved with something I enjoy. This is really fun I said to myself after fabricating a one transistor transmitter patterned after the discontinued ONER. 0-Yes let's not forget Mr. Doug Demaw, I bought the QRP notebook and Solid State Design (I didn't tell the XYL how much this book cost).

I've always been taught that addictions are bad things. I am in serious trouble now. I am thoroughly and completely addicted to SolderSmoke. I get impatient and unpredictable when the podcasts are a little late being posted on the internet. It's just like getting your fix for the week. Yes, fix for the week because it doesn't last the full two weeks. hi hi

I guess this is a non e-cursing thank you kind of Email. SolderSmoke has ruined my life, but my new life is much better with it.

Hope this epistle hasn't bored you to much. Your providing a great focal point for fellow knack victims.

Only thing left to say Bill, is KEEP ON SMOKIN!


Thanks for SolderSmoke

73 de
Stephen (Himself) (seems like everyone has a nickname)
HS0ZHB / NM7J

More Seismic Action

Two more fairly strong jolts today, both from the same region NE of here. The 4.9 was very noticeable at 11:25 am local time, and the 5.6 really shook the apartment at 19:47 local.
The USGS site is really very useful and up-to-date. Lots of data. For example, we learned that the compression wave from the 5.6 jolt took about 15 seconds to reach Rome. The people up in Abruzzo are really suffering and each one of these aftershocks makes things worse for them.

	MAG	UTC DATE-TIME y/m/d h:m:s	LAT deg	LON deg	DEPTH km	Region
MAP	5.6	2009/04/07 17:47:38	42.349	13.405	13.1	CENTRAL ITALY
MAP	4.5	2009/04/07 17:32:53	32.984	47.833	10.0	IRAN-IRAQ BORDER REGION
MAP	5.0	2009/04/07 15:18:41	37.620	-17.441	8.3	AZORES-CAPE ST. VINCENT RIDGE
MAP	4.7	2009/04/07 14:50:02	46.099	151.609	58.1	KURIL ISLANDS
MAP	2.9	2009/04/07 14:46:42	33.883	-116.872	14.4	SOUTHERN CALIFORNIA
MAP	4.5	2009/04/07 14:20:10	-7.970	122.916	236.7	FLORES SEA
MAP	5.1	2009/04/07 13:29:48	-6.976	129.425	69.7	BANDA SEA
MAP	2.9	2009/04/07 13:10:43	19.256	-65.076	63.6	VIRGIN ISLANDS REGION
MAP	2.9	2009/04/07 10:08:55	32.209	-116.626	0.0	BAJA CALIFORNIA, MEXICO
MAP	4.9	2009/04/07 09:26:31	42.336	13.360	10.0	CENTRAL ITALY

Earthquake Hits Central Italy

A 6.3 earthquake woke us up last night. Rome was shaking quite a bit. Looks like the epicenter was up in Abruzzo, near L'Aquila. News reports indicate that buildings have collapsed and people have been killed up there.

Deep Solar Minimum

Farhan alerted us to this. From the NASA website:

April 1, 2009: The sunspot cycle is behaving a little like the stock market. Just when you think it has hit bottom, it goes even lower.
2008 was a bear. There were no sunspots observed on 266 of the year's 366 days (73%). To find a year with more blank suns, you have to go all the way back to 1913, which had 311 spotless days: plot. Prompted by these numbers, some observers suggested that the solar cycle had hit bottom in 2008.
Maybe not. Sunspot counts for 2009 have dropped even lower. As of March 31st, there were no sunspots on 78 of the year's 90 days (87%).
It adds up to one inescapable conclusion: "We're experiencing a very deep solar minimum," says solar physicist Dean Pesnell of the Goddard Space Flight Center.
"This is the quietest sun we've seen in almost a century," agrees sunspot expert David Hathaway of the Marshall Space Flight Center.
For the rest of the article:
http://science.nasa.gov/headlines/y2009/01apr_deepsolarminimum.htm?list830785

The Siren Song of WSPR...WSPR DSB?

Man, that's the kind of map that I want to find on the screen when I walk into the shack in the morning. Or maybe on my Blackberry at lunchtime. Above you can see the WSPR spots for Jeff, KO7M. You can see Jerry, NR5A, in there, proudly representing South Dakota. Buried under the Northeast calls is K1JT, the only Nobel Prize winner in the group.
This morning I downloaded K1JT's WSPR program and was very pleased to find that it runs nicely on this old, rickety Windows 2000 machine. (I pushed the envelope a bit and tried to get it to run on my recently revived Toshiba Satellite Pro 400CS, but it didn't seem to like Windows 3.1. ) I have on the workbench the plans for W3PM's bare bones WSPR transceiver and the WSPR care package sent over by Jim AL7RV.
Here is my plan: Make W3PM's rig even simpler. TX only (at first) and Double Sideband. Maybe I'll just put an SBL-1 mixer between the oscillator and the RF amp in my current Visual MEPT transmitter. (I'll make it switchable so that I can go back to our beloved visual mode whenever I want.) Then add W3PM's audio amplifiers between line out on the sound card and the audio input port on the SBL-1.
What do you guys think? WSPR DSB? The other sideband should fall FAR outside the band, and it will almost certainly be completely down in the noise for anyone not running ARGO or SPECTRAN-like software.

Amazing NASA site: Audio from Apollo Landings

Akshay, VA7AAX, sent me a link to a truly amazing site. NASA has pulled together a huge amount of data on all the moon landings, and they have made it very accessible. Included is a LOT of the raw audio of the communication between the spacecraft and ground. They even have the internal communications inside the lunar lander. If you guys are looking for something to put in your MP3 players (in addition to SolderSmoke, of course) this is the place to go. It is also a great site for audio to be played in the shack while building something. It is really inspiring. This morning I listened to the Apollo 11 landing.

I like the live.365 system for the audio -- you can listen to it in streaming mode, without waiting for a long download.

Here is the site:
http://www.hq.nasa.gov/alsj/frame.html

Thanks Akshay! Thanks NASA!

SolderSmoke Podcast #104

http://www.soldersmoke.com

1 April 2009
Rome Marathon
Billy climbs Vesuvius!
Fixin' up old Toshiba laptop
Solar Power from Donuts and Tea!
Eldon's MEPT ET Phone home machine
More Catalan minimalism: The MOSquito
Book:  Thunderstruck! Marconi history
SPECIAL ECHOLINK QSO WITH NIGEL, M0NDE
MAILBAG:
Paul M0XPD new homebrewer, Funster 40, Paraset, and SDR
Preston WJ2V on REAL solder vacuum pumps
Ted AA5CK keys MEPT with iduino
Ken KG6PO on obit of TV pioneer Thomas T. Goldsmith
Art W2HQQ: "Man of High Fidelity" lacks knack
Scott KD5NJR on Sputnik 4, NASA comms
Alan W2AEW Don't smother MEPT oscillators! Books
Steve GOFUW Old Book recommendation. Building WARC rig
Jacki (XYL of KL7R) says hello from volcanic Alaska
Jeff KO7M  Why FSK on QRSS?
Jim AL7RV Sends WSPR care package.  (Thanks!) 

Solder Smoke Cologne! New!

As mentioned in SolderSmoke 104. Check it out! Here is the link:

Solder Smoke -- From the Men at Work Collection

Troubleshooting and Simulations

Alan, W2AEW, roams the Northeast USA as a Field Application Engineer for Tektronix. This week he sent me an e-mail with some words of wisdom about simulations and troubleshooting. Thanks Alan!

An excerpt from Alan's e-mail:

Funny you mentioned about LTSpice, and wanting to have that puff of soldersmoke whenever you place a component. It reminds me of something that I'd often tell new-hire engineers. Many times, engineers fresh out of school have never touched a resistor - they've often spent their entire education doing bookwork and simulations. I would always caution engineers about this, and try to illustrate that the simulation is only as good as the model you give it. If you ask the simulator to exercise the model in a way it wasn't designed for, it won't tell you that, it will just lie to you. YOU have to be smart enough to recognize the lie. For example, the simulator has no problem putting 10,000 amps through a 1N914A diode - it doesn't know that you'll let the smoke out of it! The simulator must be considered a tool, just as you VOM, scope, counter, finger, nose, etc. are all tools. Each can give you valuable information (and can lie to you). You have to learn to know what you can believe, and what you have to question - and you need to develop ways to look at strange behavior in a number of ways to figure out what is happening.

It reminds me of a story that Jim Williams wrote many years ago (you mentioned Jim Williams in a previous SS episode). He described how, as a child, he was playing with circuits at his neighbor's, and using his (neighbor's) oscilloscope to examine a circuit he was working on. He was getting all kinds of strange behavior, and couldn't make heads or tails of what he was seeing with the scope, VOM, etc. The neighbor (who was definitely afflicted with the Knack) came by and, with moistened fingers, probed around in his circuit for a few minutes. He then grabbed a small value capacitor and soldered it judiciously in the circuit, and everything worked fine. Jim was flabergasted and demanded an explanation. The neighbor said that he suspected that the circuit was oscillating at several hundred MHz, and used his finger's capacitance/loss/etc. to damp this behavior. He continued to explain that since the oscillation frequency was so high, the scope couldn't "see" it. Jim complained that this "wasn't fair"! The neighbor concluded the lesson about how important it is to not-only understand what our tools can do for us, but it is really more important to understand their limitations - because it is when we ask a tool to do something that it can't do, it often won't complain, it will lie. The same holds true for nearly every tool we use, and is a lesson well learned. This story is included in his chapter entitled "Should Ohm's Law Be Repealed?" in his book, "Analog Circuit Design: Art, Science and Personalities" from 1991.

Alan has a lot of great stuff on his web site. Check it out:
http://www.qsl.net/w2aew/

Marconi's Big Ears

Thunderstruck by Erik Larson has countless gems about Marconi. I thought I would share one with you this morning.

When Marconi was born on April 25 1874, an elderly gardener saw the new baby and exclaimed, "Che orecchi grandi ha!" ("What big ears he has!") Marconi's ever protective Irish Mom, Annie, took offense and replied:

"He will be able to hear the still, small voice of the air."

Indeed.

Thunderstruck!

Chris Trask, N7ZWY, recommended this book. I'm really enjoying it. Maybe too much: I was reading it on a crowded Rome bus this week, and was so absorbed by the chapter on Marconi's first efforts to transmit beyond line-of-sight that I didn't notice the pickpocket. He got my little radio receiver/MP3 player. The radio gods let me down that morning!

Homebrew CPU

Since we were talking about minimalist computing, I thought you guys would be interested in Steve's homebrewed CPU project, aka the Big Mess of Wires. Inspirational stuff! Check it out:
http://www.stevechamberlin.com/cpu/about/