The Oldest 2-B? (I say it's a 10!)

Harv: Wow, that's a beautiful 2-B OM. I give it a 10. If you compare it to mine, it's a 20! I checked our collection point for 2-B serial numbers and see that we have a couple that may be rivals in the title "Senior 2-B." Thanks for pointing out that they started at #2000.

................................

Hi Bill,

What makes a radio a 10 out of 10?

Good question. A real 10 to me means the radio is flawless, clean, not repainted and the best example possible based upon age and general appearance.

Here is one of my Drake 2B Communication Receivers with the matching Speaker/Q Multiplier.

This one has the S/N 2532 which, places the production of this radio close to early Spring 1961. The radio is not flawless. It has very minor metal edge dings in the paint.

I have the original Owners Manual and lots of special notes. At best my pictured radio above is a 9.5.

In my collection is also; S/N 4226 which was built near the end of 1961. I rate S/N 4226 as a 9.8 radio.

I’m impressed with the AVG recovery, general receiver sensitivity and the combination selectivity afforded by the Q-Multiplier.

I believe the Drake web site is spot on with the dating of the production runs for Drake equipment.

From talking to other Hams, it looks like the 2B started with S/N 2000 on their first full run of production in early April 1961.

It would be interesting to see if others find radios with a serial number less than mine still out there pulling duty.

I’m sure some pilot radios are out there in private collections. Let me know if someone finds an earlier serial number.

Keep up the great work Bill!!!

ENJOY

HARV -=WA3EIB=-

Albuquerque, NM.

-------------------------------------------------------

Our book: "SolderSmoke -- Global Adventures in Wireless Electronics"http://soldersmoke.com/book.htmOur coffee mugs, T-Shirts, bumper stickers: http://www.cafepress.com/SolderSmokeOur Book Store: http://astore.amazon.com/contracross-20

Another Treasure Trove Discovered

Our man in Ankara, Grayson, KJ7UM, sent me links to the truly amazing web site of Dr. J.B. Calvert, Professor Emeritus of Engineering at the University of Denver. Great stuff!
Sorry about the Istanbul/Ankara mix-up Grayson. I must say, Istanbul sounds cooler and more exotic. Good luck with the beer OM.

...............................................

Hi Bill,

Thought I would pass along the web site of quite an amazing fellow. While not a ham, he is a homebrewer, experimenter, and total scientist.
Guys like this amaze me!
http://mysite.du.edu/~jcalvert/index.htm

This is the site of Dr. James Calvert. On his site are hundreds of "papers" (articles?) on hundreds of scientific topics, history optics, astronomy, etc. I have read quite a few and I am damn impressed with the guys style, and curiosity.
Check out his paper on vacuum tubes. I learned a hell of a lot from this about a subject I though I know pretty well.

Check out this link
http://mysite.du.edu/~etuttle/electron/elecindx.htm
and the section on tubes:
http://mysite.du.edu/~etuttle/electron/elect27.htm
It is excellent. Enough to keep me reading for years.

Thanks for the plug in your last podcast.
BTW, I live in Ankara (the capital). If i did live in Istanbul, parts would be much easier to get. Actually I have found a source of parts, but what I REALLY need is a good source of decent beer! TUrkey only has one beer and it sucks. Anyone want to send me a good beer I would be most appreciative (then I can homebrew much better!)!

Take care and keep poding

Grayson
KJ7UM/TA2 - Ankara, Turkey

........................................

Our book: "SolderSmoke -- Global Adventures in Wireless Electronics"http://soldersmoke.com/book.htmOur coffee mugs, T-Shirts, bumper stickers: http://www.cafepress.com/SolderSmokeOur Book Store: http://astore.amazon.com/contracross-20

Russia, Vermont, Sputnik, Old Parts

When I heard of the terrible floods in Vermont, I thought immediately of OM Michael, AA1TJ (aka Comrade Mikhail, the Chief Designer) and his underground hamshack. I heard this morning that Michael is high and dry, up at his mountain top lair (the TV transmitter). Here is an update on the Sputnik project:

Fellas,

This morning DL3PB was kind enough to bring Peter, DL3JIN's recent work to my attention.

http://dl3jin.de/sputnik1_tx.htm

I think you will agree that Peter has made a beautiful job of it! He not only used Russian tubes (valves), he even had a 21.060MHz Russian-made quartz crystal on-hand. Many of the passive components appear to be ex-Soviet surplus as well. His front panel really shows great spirit. With 96Vdc on the PA anode he's seeing an RF output power of 650mW.

It should be great fun come October 4!

73/72,

Mike, AA1TJ

Our book: "SolderSmoke -- Global Adventures in Wireless Electronics"http://soldersmoke.com/book.htmOur coffee mugs, T-Shirts, bumper stickers: http://www.cafepress.com/SolderSmokeOur Book Store: http://astore.amazon.com/contracross-20

Natural Disaster Report

We have battened down the hatches and are enjoying a quiet evening at home as Hurricane Irene approaches. The radar image from Norfolk Virginia describes the current situation quite well. You can see the eye about 150 km south-east of us. We currently have moderate rain and wind. I don't think it is going to be bad for us. Best wishes for all those under this storm.

As for the earthquake, well, most everyone has their earthquake story (those who don't are said to have Earthquake Envy). I was at poolside with Billy and Maria. It was quite a jolt here, stronger than anything we felt in Italy. When we got home, the only noticeable impact was that Maria's ET doll had fallen from a shelf in the shack. More details in SolderSmoke 137.

Our book: "SolderSmoke -- Global Adventures in Wireless Electronics"http://soldersmoke.com/book.htmOur coffee mugs, T-Shirts, bumper stickers: http://www.cafepress.com/SolderSmokeOur Book Store: http://astore.amazon.com/contracross-20

Beautiful Homebrew Gear from Italy

We may have had Fabio Bonucci's rigs on the blog before, but they are so nice I thought it would be OK to feature them again. Bravo Fabio!

http://nuke.ik0ixi.it/Autocostruzione/Ricetrasmettitori/tabid/484/Default.aspx
....................
Our book: "SolderSmoke -- Global Adventures in Wireless Electronics"http://soldersmoke.com/book.htmOur coffee mugs, T-Shirts, bumper stickers: http://www.cafepress.com/SolderSmokeOur Book Store: http://astore.amazon.com/contracross-20

Get SolderSmoke Daily News by e-mail

We have a new feature on the blog: You can easily arrange to get an e-mail whenever I post something new. You can get early notification on new podcast episodes. Just enter your e-mail address in the box to the upper right of the blog page.

Our book: "SolderSmoke -- Global Adventures in Wireless Electronics"http://soldersmoke.com/book.htmOur coffee mugs, T-Shirts, bumper stickers: http://www.cafepress.com/SolderSmokeOur Book Store: http://astore.amazon.com/contracross-20

Homebrew Microphone Using Cream of Tartar (NOT Tartar Sauce)

Podcast listeners will recall that this year's April 1 edition featured a story about my (supposed) efforts to cure long-standing audio problems by "chemically tailoring" home-made microphone elements. I asked for listener suggestions on which kitchen ingredients I should add to the mix. Very few listeners fell for it. But now -- as often happens -- somebody out there has completed the project that we were using as our annual hoax. Check it out. Very interesting:
http://leafcutterjohn.com/?p=1518
And I think he has a follow-up post.

Our book: "SolderSmoke -- Global Adventures in Wireless Electronics"http://soldersmoke.com/book.htmOur coffee mugs, T-Shirts, bumper stickers: http://www.cafepress.com/SolderSmokeOur Book Store: http://astore.amazon.com/contracross-20

Radio Drama about RADIO!

Dale, W9DKB, alerts us to a radio drama from 1973 that is all about mysterious radio signals from space. Very cool. Thanks Dale.
.....................................

Hi Bill,

I've enjoyed your podcast for the past 2 years, never miss it. And I enjoyed your book, Global Adventures.

Last night I listened to a free radio show from Jim French Productions and thought of you. It's a story that involves computerized data signal processing, communication with aliens, radio noise analysis, NASA, Apollo, Skylab, deciphering codes based on chemical specific gravities, neat jazz music ... all the things a knack victim like yourself would enjoy. And here's the kicker - the production was made in 1973! You can hear the old 500 series Bell telephones used for sound effects and all that. Give it a listen. I think you'll like it.

This is an episode of "Dameron". If you like listening to radio dramas, this is a great site to visit as they post a new show on their "Listen Now" page each week. The Harry Nile adventures are great. But so are the Adventures of Sherlock Holmes. Of course all of them are available for download at a modest cost. (No, I have no affiliation with Jim French Productions.)

http://jimfrenchproductions.com/zc137m/index.php?main_page=page&id=2&chapter=0
is the link. Scroll down the page. The show you want is titled WEEK 804, Dameron, "Earth is Ours". Just click the blue "Listen Now" label.

73,
Dale
W9DKB
River Falls, WI

Our book: "SolderSmoke -- Global Adventures in Wireless Electronics"http://soldersmoke.com/book.htmOur coffee mugs, T-Shirts, bumper stickers: http://www.cafepress.com/SolderSmokeOur Book Store: http://astore.amazon.com/contracross-20

German Tanks and Drake 2-Bs: We Have the Number!

Hi Bill,

Finally getting back to you. I crunched the numbers... I saw a total of 23 serial numbers reported. The important thing is that these numbers be reported somewhat randomly with no biases etc. I think this is the case, and the fact we have 23 numbers is very very good in terms of the power of this experiment. The highest number reported was 12955. Let m = 12955. The number of reports was 23 so let k = 23. The equation to use (from wikipedia) is below...

Simply applying this equation we get an estimate highest serial number of 13517. So we can estimate that between 13000 and 14000 Drake 2Bs where made. I think I remember someone mentioning that the Drake 2B serial numbers did not start at zero. This is not really a problem. You just need to know at what number they did start, then subtract that number from 13517, and that would be the number of Drake 2Bs ever manufactured.

The lowest serial number reported to SolderSmoke was 2008, so you wouldn't need to subtract more than that. You can think of this equation intuitively (a very SolderSmoke thing to do!). Imagine what happens when we have a single observation. k = 1, so our estimate is about 2 times what our highest observation is. This makes sense because you would guess your observation is most likely to be about half way between 0 and the true top number. If k = 2, then our estimate is about 1.5 times our highest observation. If k = 3, then our estimate is about 1.333 times our highest observation.... as we observe more numbers, we are more likely to have observed the top number so as k goes to infinity, our estimate moves towards our top observed number, which it should.

I hope my explanation made sense. Anyway I highly recommend SolderSmoke listeners who want to know more, to read the wikipedia page. Its quite well written and offers a lot for people who like hard formal explanations and an intuitive description. Keep up the good work!

I love the podcast - hopefully we may catch each other one day on the bands.

73 Scott (K6AUS)

Our book: "SolderSmoke -- Global Adventures in Wireless Electronics"http://soldersmoke.com/book.htmOur coffee mugs, T-Shirts, bumper stickers: http://www.cafepress.com/SolderSmokeOur Book Store: http://astore.amazon.com/contracross-20

FT-817 Remote Access and The Perils of PC Board Etching

Mike is looking for some beta testers for his FT-817 remote control system, and for someone who is proficient on VB6 who can help him clean up the code.

....................

Bill,

Hello I am a 47 year old ham from Pittsburgh,Pa and my call is WA3O. I felt compelled to write you after my Kindle purchase of your Solder Smoke book. I don't usually read books cover to cover but, this book is different I can not seem to put it down. This is the first time I can personally relate to a book. Like you, I started ham radio at the early age of 13 and have built and struggled with the same projects you have. So I wanted to say thanks!...I am half way through the book and I am dreading finishing it because I probably will never find another book I can relate to so well.

My latest project is some software I wrote for the FT817 and Icom radios. I am not a programmer but, I taught myself VB6 so I could write this remote software. After reading in the book about your Iphone “link”I thought you might like it and I wanted your opinion on it. The software is DTMF control of your radio from any phone. With Skype (and a Skype-in phone number) and my software, you can call your radio from ANY phone (not just a smart cell phone). You dial your number and after a security number the program turns your radio on via the printer port and you have pretty much full control of all the functions of your radio with the voice announcer on the radio (Icom) or the voice out on Microsoft computers it can announce frequency, signal, mode etc. you can even TX. The software even has a time out timer just in case of say a cell phone “drop call”. The software has many features like 50 memory recall, selective scanning, band scanning,direct frequency input. If you have a radio like a IC-7000 or a FT-817 and a auto tuner you have access to all HF,VHF and UHF. I brought the software idea up to some local hams and it sounded like it was a bad idea. I use it every day to listen to 160M while I drive to work in my truck without a BIG 160 antenna on it! I also thought it would be great for guys who just like to see what band conditions are on lunch break. Let's face it we all carry a cell phone. So I would really appreciate your opinion on this.

One last comment...while I was reading about your struggles with etching your own board it reminded me of my first experience with etching solution. My buddy etched boards before and told me all you had to do was draw what you wanted with a Sharpie on a copper PC board and throw it in some solution and “rock it back and fourth a bit and it works like magic. So unknowingly we put the solution in a pie tin and palced the board in. It immediately started boiling and put off an orange smoke! I said NEAT! And before my buddy could tell me it was NOT supposed to do that it ate thru the bottom of the pie tin...What a mess! And mom wasn't happy! LOL

So best of 73's and keep up the good work

Mike Lamanna WA3O

.......................................
Our book: "SolderSmoke -- Global Adventures in Wireless Electronics"http://soldersmoke.com/book.htmOur coffee mugs, T-Shirts, bumper stickers: http://www.cafepress.com/SolderSmokeOur Book Store: http://astore.amazon.com/contracross-20

Fessenden's Music from the Outer Banks

George, KB3ODH, found this about 1/2 mile from the Cape Hatteras Lighthouse.

Our book: "SolderSmoke -- Global Adventures in Wireless Electronics"http://soldersmoke.com/book.htmOur coffee mugs, T-Shirts, bumper stickers: http://www.cafepress.com/SolderSmokeOur Book Store: http://astore.amazon.com/contracross-20

Bike Radio II

Thanks for all the suggestions on the bike radio. I googled around a bit and found a schematic that seems very similar to the little receiver I'm working with. I almost certainly would be better off starting anew (perhaps keeping the AF circuitry). But it is interesting to see how a simple AM receiver works. That first transistor is an autodyne circuit -- both a mixer and a oscillator.

Our book: "SolderSmoke -- Global Adventures in Wireless Electronics"http://soldersmoke.com/book.htmOur coffee mugs, T-Shirts, bumper stickers: http://www.cafepress.com/SolderSmokeOur Book Store: http://astore.amazon.com/contracross-20