Yikes! Screeching Transistors Throwing off Blue Light!

I found a quote from Doug DeMaw that I wanted to share.  This one seems appropriate as I struggle with unwanted oscillation (and as Halloween approaches). From the January 1986 QST:

"Self -oscillation occurs not only in the low-frequency and high-frequency spectrum, but it often takes place at audio frequencies!  I have actually heard the transistors "screeching" when strong audio oscillations were taking place in a homebrew transistor power amplifier. On one occasion I could see a bluish glow coming from within the transistors (visible through the ceramic heads of the devices) during a period of instability.  Needless to say, the transistors self-destructed."

I've been having some instability problems with my BITX 17 IRF510 final.  But I think I have the problem identified.  I was getting low frequency oscillations (around 100 KHz).  Tonight  tried putting the IRF510 on a separate power supply.  The oscillations ceased and I am getting a nice clean 3 watts out.   So I'll go back and beef up the decoupling on the power supply lines.


Our book: "SolderSmoke -- Global Adventures in Wireless Electronics" http://soldersmoke.com/book.htm Our coffee mugs, T-Shirts, bumper stickers: http://www.cafepress.com/SolderSmoke Our Book Store: http://astore.amazon.com/contracross-20

20% off on SolderSmoke Book

Just use the coupon code PUMPKINS at checkout:

http://www.lulu.com/spotlight/soldersmoke

(You can also use this coupon to buy Grayson's "Hollow-State Design" :
http://www.lulu.com/shop/grayson-evans/hollow-state-design/paperback/product-20987562.html

Our book: "SolderSmoke -- Global Adventures in Wireless Electronics" http://soldersmoke.com/book.htm Our coffee mugs, T-Shirts, bumper stickers: http://www.cafepress.com/SolderSmoke Our Book Store: http://astore.amazon.com/contracross-20

SolderSmoke Podcast #155 BITX17, TEK465

Podcast # 155 is available for download (or you can listen by clicking on the button above):
http://soldersmoke.com/soldersmoke155.mp3

October 14, 2013  (Delayed Back-to-School edition)

Topics covered:

-- BITX Beauty -- Building a BITX17

-- VFO woes, and the wisdom of Doug DeMaw's love for crystals

-- Why does a 55 year old man NEED clear nail polish varnish?

-- How the VFO KILLED the Tek 465

-- Trying to fix the Tek 465 (not for the faint of heart)
 
-- New products:  Justin Beiber Duct Tape, bifocal safety glasses,
magnetic reading glasses, Ward Silver's new book

-- Backwards British Bike Brakes

-- MAILBAG 

Our book: "SolderSmoke -- Global Adventures in Wireless Electronics" http://soldersmoke.com/book.htm Our coffee mugs, T-Shirts, bumper stickers: http://www.cafepress.com/SolderSmoke Our Book Store: http://astore.amazon.com/contracross-20

"Robert Ford -- A British Radio Operator in Free Tibet..."

http://www.economist.com/news/obituary/21587201-robert-ford-british-radio-operator-free-tibet-died-september-20th-aged-90-robert-ford

Our book: "SolderSmoke -- Global Adventures in Wireless Electronics" http://soldersmoke.com/book.htm Our coffee mugs, T-Shirts, bumper stickers: http://www.cafepress.com/SolderSmoke Our Book Store: http://astore.amazon.com/contracross-20

Nice Slide Show on BITX

https://sites.google.com/site/arvidevans/BITX_QRPacificon..pdf?attredirects=0


Our book: "SolderSmoke -- Global Adventures in Wireless Electronics" http://soldersmoke.com/book.htm Our coffee mugs, T-Shirts, bumper stickers: http://www.cafepress.com/SolderSmoke Our Book Store: http://astore.amazon.com/contracross-20

BITX BUILD UPDATE #13 -- VIDEO TOUR

I hope to get the next podcast out within a week or so.  The BITX has been keeping me busy!


Our book: "SolderSmoke -- Global Adventures in Wireless Electronics" http://soldersmoke.com/book.htm Our coffee mugs, T-Shirts, bumper stickers: http://www.cafepress.com/SolderSmoke Our Book Store: http://astore.amazon.com/contracross-20

BITX BUILD UPDATE #12 -- Relay and PA, BITX 17/10?

As you can see, the board is starting to fill up.  I really like it.  It seems (to me) like the canvas of a painting approaching completion. This morning I put in the T/R relay.  That space in the upper left is reserved for the driver and the IRF510 Power Amplifier.

I got some help from the Chief Designer this week.  As noted in an earlier post, Farhan  advised me to check the mixers.  I knew that I had them wired correctly and that they were in fact mixing, but when Farhan advises you to check something, YOU CHECK IT.  Farhan was right (see earlier post).

It really sounds great.  I know that the filter still has significant ripple in it, but the receiver sounds so good I'm reluctant to mess with it.  Should I de-ripple it?

On the train yesterday I was thinking about this rig, and it occurred to me that my 23.1 MHz VXO/ 5  MHz IF arrangement means that this 17 meter transceiver could also generate signals on the 10 meter band.  Of course, I'd have to build a second bandpass filter, but the radio gods guided my hand and caused me to leave space on the board for just such a filter (see above).  I realize the IRF510 PA wouldn't be too good up at those frequencies,  but when the radio gods speak, you have to listen.   

Our book: "SolderSmoke -- Global Adventures in Wireless Electronics" http://soldersmoke.com/book.htm Our coffee mugs, T-Shirts, bumper stickers: http://www.cafepress.com/SolderSmoke Our Book Store: http://astore.amazon.com/contracross-20

Tek Troubleshooting Triumph

Thanks to the manual provided by Jim and the HV test gear provided by Alan Wolke, I was able to finish the troubleshoot on the broken Tek 465.   It is the HV multiplier, U1432.   The cathode voltage is supposed to be -2450.   It initially tested at -1000.    The manual calls for a jumper to be removed to take the HV Multiplier out of the circuit.  As soon as I did that, the cathode voltage went to -2500.   Bingo.

 

Now I have to get a replacement for U1432.    Any carcasses laying around?

 

Thanks guys. 

 

Our book: "SolderSmoke -- Global Adventures in Wireless Electronics" http://soldersmoke.com/book.htm Our coffee mugs, T-Shirts, bumper stickers: http://www.cafepress.com/SolderSmoke Our Book Store: http://astore.amazon.com/contracross-20

BITX Build Update #11 -- Peakin' and Tweakin'

Oh how I love the sound of a newly built receiver!  I'm sitting here listening to G0MJS on 17 meters.  Lots of other stations from across the pond coming in very nicely. 

Earlier in the week I had some sensitivity problems.  I could hear the noise floor, but just barely.  And the receiver just seemed to have trouble inhaling.  So I started poking around.  It seemed that each poke improved things a bit.  I had used Farhan's original schematic (mostly).   Later versions put an additional transistor in the IF amp.  So I went ahead and added that mod.  That helped a bit.  Then I noticed that BFO energy was getting into the AF amp.   So I put a .1uF cap to ground at the input to the AF preamp.  That took care of the RF and did no damage to the AF.  

But the rig still seemed a bit hard of hearing.  This morning Farhan advised me to take a look at the mixers.  I used some junk-box diodes that I didn't know too much about...  I measured the forward resistance and found it to be quite a bit higher than the usual 1N914s.  So I switched all 6 mixer diodes.  That helped noticeably.

I also checked the input bandpass filter.   It seems OK.   In the process I learned to use the EMRFD filter programs (thanks Wes) and the ELSIE filter program (also very nice).

Anyway, the rig sounds great now.   On to the transmitter.  

Farhan advises building the power amplifier on a separate copper clad board.  But I have room for it on my main board.  Should I live dangerously?   


Our book: "SolderSmoke -- Global Adventures in Wireless Electronics" http://soldersmoke.com/book.htm Our coffee mugs, T-Shirts, bumper stickers: http://www.cafepress.com/SolderSmoke Our Book Store: http://astore.amazon.com/contracross-20

Occam's Microcontroller

Paul, M0XPD, has what I'm sure is a wonderful article on a simple microcontroller-based rig in the current issue of our beloved SPRAT.   I look forward to seeing it.  And I really like the logo with William of Occam (of razor fame). I have encouraged Paul to take a break from the microcontrollers and build something discrete and analog... like a BITX!  

Our book: "SolderSmoke -- Global Adventures in Wireless Electronics" http://soldersmoke.com/book.htm Our coffee mugs, T-Shirts, bumper stickers: http://www.cafepress.com/SolderSmoke Our Book Store: http://astore.amazon.com/contracross-20

BITX Build Update #10 -- Darling(ton)

Having concluded that I was significantly short on overall receiver gain, I went in yesterday and changed my AF amp from a 40db direct-coupled circuit to a 100db Darlington pair.  I immediately noticed a big increase in audio output. 

I did a quick receiver alignment using my Arduino/AD9860 sig generator.  First I determined the actual bandpass of the crystal filter: 4.998170 MHz -- 5.000960 MHz.   Using a freq counter, I set the BFO at 5.00126.   I immediately started hearing 17 meter SSB signals from the West Coast.  That's always a nice moment:  first signals through a new receiver.  Kind of like "first light" in a new telescope.  Even with the filter ripple, it sounds great.

I think I'm still significantly short of gain.  Audio is still faint. I notice that in the BITX17A they have added a second transistor (Q17) in the second RX receive amp.  Maybe I should try something similar.   Or should I add some gain in the audio chain?

I'm really enjoying this BITX project. 


Our book: "SolderSmoke -- Global Adventures in Wireless Electronics" http://soldersmoke.com/book.htm Our coffee mugs, T-Shirts, bumper stickers: http://www.cafepress.com/SolderSmoke Our Book Store: http://astore.amazon.com/contracross-20

Hackers' Paradise

http://hackaday.com/2013/09/23/guest-rant-ham-radio-hackers-paradise/

Our book: "SolderSmoke -- Global Adventures in Wireless Electronics" http://soldersmoke.com/book.htm Our coffee mugs, T-Shirts, bumper stickers: http://www.cafepress.com/SolderSmoke Our Book Store: http://astore.amazon.com/contracross-20