Podcasting since 2005! Listen to Latest SolderSmoke
Monday, April 20, 2020
DX WaveScan
I heard this program this morning on my Q-31 receiver. It was on WRMI 9955 kHz at around 1330 UTC.
It reminded me a lot of the DX listening program of HCJB. Good stuff.
You can listen to the programs on-line at: https://awr.org/program/engmi_wav/
Labels:
AM,
Quarantine,
Short Wave Listening,
Superhet receivers
Sunday, April 19, 2020
Q-31 Quarantine Receiver -- All Boxed Up, Almost Done
Almost done. A few odds and ends remain, but now I have all the circuitry in their boxes.
As I was taking my walk the other day I was thinking of how I didn't have to build a BFO for this superhet. That's because the signals coming in on this rig bring with them their own BFO signal (the carrier).
Labels:
AM,
Quarantine,
Superhet receivers
Saturday, April 18, 2020
Q-31 Quarantine Receiver -- +30 db and a Germanium Diode Help a Lot (video)
Today I added two additional stages of IF amplification. This added 30 db to the receiver's total gain. That helped a lot. I also discovered that Germanium (1N34A) diodes work a LOT better as AM detectors than do silicon diodes. This receiver is starting to sound decent. Currently listening to the VORW program on WRMI Miami.
Labels:
Quarantine,
Superhet receivers
Friday, April 17, 2020
Walter's VFO
Main VFO board under plastic -- buffer board off to the right |
Regarding the last line in Walter's article, please direct any complaints about drifting analog VFOs to Peter Juliano. He will be delighted to receive these complaints, and will promptly provide all correspondents with very succinct advice on how to overcome the instability.
My Way to a Low-Drift Analog VFO, by Walter KA4KXX
I recently built a digital VFO (from a QRP Labs Kit) to see what everybody is talking about, and it has been quite handy for my first two-band homebrew transceiver, but by the time one adds the low pass filter, a low-level RF amplifier to boost the weak output, a 5 VDC regulator, and a hefty +12VDC power line filter to the beast to keep the digital noise out of the rest of the radio, for a single band project I still prefer a low-drift analog VFO.
My approach to minimizing drift is very simple and works well for a VFO range of 3 – 7.3 MHz, which is all that is needed for the 20 to 80 Meter bands, either direct conversion (adding a doubler for 20M) or single conversion with approximately a 10 MHz IF.
First, see my schematic (adapted from Small Wonder Labs 40+ transceiver, original BITX40 Analog VFO, and other sources) and wind an air core inductor with stout magnet wire such as 24 or 22 AWG. Use a thick, rigid plastic form of a diameter so that you need about 12 turns, and single coat with water-based sanding sealer, Q-dope, or similar. Use hot glue to mount the coil firmly to the single-sided circuit board, and build a cover of some type, especially if the radio is to ever be used outdoors.
Second, all the VFO capacitors (except power supply bypass) should initially be the modern C0G type, which can be obtained from Mouser (such as TDK FG28C0G1H681JNT06 or the like), which I trust more than those labeled NP0.
Then, power up the VFO and tweak the coil, tuning arrangement, and range capacitor to get the frequency range you desire.
Next, monitor the drift from a cold start to see how fast it is moving as it warms up, and whether it stabilizes nicely (my goal for SSB Phone use is less than 20 Hz drift during any 10 minute period) after 10 – 15 minutes maximum. If it does not stabilize to your satisfaction, then start substituting polystyrene caps for the C0G units one at a time until you are happy with the performance.
[Also remember that a stable BFO is important as well, and if you use the BITX 40 crystal oscillator design, I recommend installing a dedicated 78L09 power line regulator.]
If you build this VFO at the higher (7 MHz) frequency end, just change the inductor value to about 0.5 uH, with everything else about the same, but expect to do more tweaking to get stability, and the warm-up time may be closer to 15 minutes. After years of experimenting, this is what has worked for me. If it works for you, please send me an email (see my QRZ page) of thanks. If not, file a complaint with Soldersmoke.
Labels:
BITX40Module,
DeMaw--Doug,
Kits,
Parts suppliers,
VFO
Thursday, April 16, 2020
Q-31 Quarantine Receiver -- First Signals (Video)
It still needs a lot of work, but today it pulled in its first shortwave signals. See video.
Labels:
Quarantine,
Superhet receivers
Tuesday, April 14, 2020
Quarantine Rig Q-31 -- Putting the Stages Together (Most of Them)
I've been recording short videos on my progress with the Q-31 Shortwave AM Quarantine Receiver.
Yesterday was a bit of a milestone -- I put five of the six sub-assemblies together and did some testing. You can see the video above.
All the other videos are on my YouTube site:
https://www.youtube.com/user/M0HBR
Please subscribe and give me a "thumbs up."
SITS! Stay in the shack! Flatten the curve. Hang in there. 73 Bill
Labels:
AM,
Short Wave Listening,
Superhet receivers
Monday, April 13, 2020
Other Kinds of Knack: Woodwork Wizard! (video)
This guy has some amazing tools, and even more amazing skills. I find it inspirational to occasionally take a look at other kinds of workshops. Check it out. Video above.
Along similar lines, the young Englishman Leo was in Washington state with his girlfriend when the lock-down and travel bans kicked in, so his work on Tally Ho (and his videos) continue. See:
https://youtu.be/zXV0ywqj7zY
SITS! or Stay in the wood-shop!
Labels:
boats,
Knack Stories,
woodworking
Sunday, April 12, 2020
Brace Yourselves: DK7IH's New Transceiver -- The Gimme Five
Lock-down is bad enough, but now we will also have to cope with the feelings of homebrew inadequacy that Peter's rigs always cause. But look on this as an opportunity for inspiration. Peter once again raises the bar.
This looks like it is the first in a series of blog posts. Just what we need in quarantine. Thanks Peter.
Labels:
Germany,
microcontrollers,
Si5351,
SSB
Saturday, April 11, 2020
Videos on the Q-31 Quarantine AM SW Receiver Project (and some pictures)
I've been making some short, stage-by-stage videos of my Q-31 receiver project. So far I have seven videos. They are here:
https://www.youtube.com/user/M0HBR/videos
Please subscribe to my YouTube Channel. And give me some "thumbs up" if you like the videos.
Thanks. SITS! FlattenTheCurve! 73
Pads from Pete, toroids from Farhan |
The diode ring |
Altoids-sized tins will hold the circuit boards |
Stay In The Shack -- Or in the front yard. |
Labels:
AM,
Farhan,
Filters,
Juliano -- Pete,
mixer theory,
Parts suppliers,
Quarantine,
Superhet receivers
Friday, April 10, 2020
Blog -- "Chinese Electronics Products Tested"
I was looking for information on my FeelTech FY3200s Signal Generator. I came across a very informative blog; it covers a variety of other Chinese gear and parts.
Here is the Feeltech FY3200S article:
https://chinese-electronics-products-tested.blogspot.com/p/fy3200s-function-generator-tested.html
Here is the home page of the blog:
https://chinese-electronics-products-tested.blogspot.com/
And here is backround information on the author:
Thanks Jos!
Labels:
China,
Netherlands,
Parts suppliers,
test gear
Thursday, April 9, 2020
WB9IWT's Quarantine Mighty Mite and N3FJZ's "Hiram Percy Maxim Recognition Factor"
Leif WB9IWT has, during the emergency, been working on a Michigan Mighty Mite (See pictures above and below). FB Leif.
But also check out the very astute comment from Rick N3FJZ (below) . I am, of course, all in favor of the HPMR Factor. Almost all of my rigs would score quite high. Others, I know, would seek a low score. To each his own. This is all for fun.
Leif,
Great work. If a ham from the 1920's were to see this rig, they
probably wouldn't recognize the actual components right away (but
knowing hams, they would no doubt figure it out), but the breadboard
layout circuit flow would be immediately recognizable; e.g. the plug-in
crystal, the coil, binding post. The transistor and variable capacitor
may baffle them at first, but seeing there are three leads on the
transistor would start to give them clues.
That's the cool part about analog discrete component radio, no matter
how many years go by, and the appearance and size of the actual
components change, the physics of what's going on at the electron level
stays the same (SDR not withstanding).
I guess this could be a litmus test for us analog radio builders. It
could be called the "Hiram Percy Maxim Recognition Factor" or "HPMR
Factor" with a range of 0 to 1. After you build your rig, take a look
at it and pretend that you could present it to Mr. Maxim and the more he
could understand the circuits, components and circuit flow on his own,
the closer to a factor of 1 your radio would achieve. For example, an
SDR might only achieve a factor of .1 or even maybe 0, where as your rig
may achieve a factor of .8, and one of your crystal receivers would
definitely get a 1.
Someone could even workout a check list or formula where you would add
or subtract some fractional numeric values for each component you used;
e.g. you would subtract some value for every IC chip, microprocessor or
LCD display you use, and add some fractional value for each hand wound
coil, vacuum tube/valve or open air variable capacitor, et cetera.
Fun to think about.
Keep building.
Rick - N3FJZ
Labels:
Michigan Mighty Mite,
Old radio,
Quarantine,
radio history
Wednesday, April 8, 2020
Quarantine Reading: Tribal Knowledge: Two Gems from Pete Juliano N6QW
WB9FLW recently reminded us of two very useful documents that have been kind of buried on one of Pete's web sites. I think these documents are just the kind of thing we all need during these dark days of quarantine. So just sit back, StayInTheShack, and soak up tribal wisdom from the Wizard of Newbury Park.
Here is the message from WB9FLW that unearthed these gems:
Morning Pete,
Three cheers for posting the Simple SSB Transceiver as a possible project during the pandemic lockdown.
Suggestion, folks that are new to your Website may not have seen some of your earlier posts especially on jesssystems.com.
"Homebrewing For QRP SSB" is a gem and a great lead in to the simple SSB Transceiver project.
There is a lot of wisdom in those pages, perhaps you can add a link for those interested in building the rig.
"How To Stuff A Junk Box" is good as well.
Hope you and the family are doing well.
Pete WB9FLW
Labels:
Juliano -- Pete,
Parts suppliers,
SSB
Subscribe to:
Posts (Atom)