Does Matching Matter? (Diode Matching for Diode Ring Mixers) -- Nick M0NTV Finds the Answer (Video)

In this video, Nick M0NTV takes on a hot topic in ham radio homebrewing:  The matching of diodes in diode ring mixers.   How should the matching be done and -- more controversially -- is this matching necessary?  

I won't spoil it for you by giving the answer.  Watch Nick's video to find out if it matters.  (But a hint appears below.)

I think it is great that Nick has taken the trouble to look carefully at this issue, and has found info that will be of great use to  homebrewers.   And I really liked Nick's response to the fellow who suggested just going out and buying a commercial diode ring:  Nick replied that he homebrews because he likes to, and because he wants to know how these circuits work.  FB Nick. 

I was also pleased that Nick gave some much warranted recognition to Pete Juliano for his idea regarding the placement of a trim pot on a diode ring.  This idea made it into the Experimental Methods in RF Design book (under Pete's old call: W6JFR).  Page 6.56. 

Spy Rigs, Para Sets, Bugs, and Enigma Machines -- Dr. Tom Perera W1TP (video)

This is a really amazing presentation by Tom Perera W1TP to the Fairlawn (NJ) Amateur Radio Club. 

There is so much great info in this presentation.  Some of the highlights for me: 

-- The U.S. Civil War telegraphic (wired) spy set was just mind blowing.  I had never heard of this.  

-- The way the Nazis transmitted a signal 1 kc off the BBC frequency, so that Germans who tuned their Nazi-issued receivers to the BBC could be detected by neighbors (from the resulting 1 kc tone!) and turned in to the Gestapo.  

-- "Things don't land gently when dropped by parachute." Indeed.  This was a reminder of the courage of the young women who parachuted into Nazi-held territory during WWII.  Like Paulette.  It was great to see her with her Paratrooper wings on.  AIRBORNE!  And the picture of the operator with the bicycle generator was of Virginia Hall.  See: https://www.npr.org/2019/04/18/711356336/a-woman-of-no-importance-finally-gets-her-due  That portrait hangs in the hallway of the National War College. 

-- How they put the schematic of the PRC-5 right into the box.  Great idea.  But it had a terrible receiver.  One of the schematics showed a 455 kc IF and a BFO.  So they sent in superhets, not just regens. 

N2CQR operating the Para Set of G3ROO around 2009

This video makes me want to build a Para Set. 

Thanks a lot to Tom W1TP and the Fairlawn ARC. 

Paul VK3HN's Video on Scratch-Building and SOTA

It was great to get a comment from Paul VK3HN -- this led to a re-establishment of contact.  Apparently Google knows who I have been e-mailing, so this great video appeared on my YouTube screen.  Thanks Google! 

-- Great to hear Paul's shout out to Pete Juliano N6QW, and Pete's concept of noodling. 

-- Paul's emphasis on testing each stage independently is really important. 

-- Wow, ferric chloride!  It is great to see someone doing this (instead of just sending Gerber files to China). 

-- Books.  This reminds me that I have to get Drew Diamond's books. 

-- Paul's comment on the usefulness of a general coverage receiver.  Right on target Paul.  

-- On the test gear, we can now add the TinySA Ultra.  And you don't have to win the Lotto! 

-- Finally, Paul is absolutely right on the need to constantly update and publish changes to schematics. I am guilty of not doing this. (I hang my head in shame.)   This became a problem in our simple High-School receiver project -- I would make changes to circuits and fail to communicate these changes to Dean KK4DAS.  Paul's method would have solved this problem.  

-- Thanks Paul! 

Sunburst and Luminary: Apollo "Rope" Memory, and other items of interest

 

Wow.  That is the method that they stored computer memory for the moon missions.  When they were satisfied with a program they would say it was time to "put it on the rope."  

Here's an article on the women who built the rope memory (and the integrated circuits used in Apollo). This reminded me of the women's collective in Hyderabad that "wove" the ferrite core transformers for Farhan's BITX rigs: 

https://www.sciencenews.org/article/core-memory-weavers-navajo-apollo-raytheon-computer-nasa#:~:text=Core%20memory%20used%20metal%20wires,to%20create%20a%20particular%20pattern.

Here is a Wikipedia article on core rope ROM memory with some great illustrations: 

https://en.wikipedia.org/wiki/Core_rope_memory

The Rope

Other stuff of interest that I have spotted so far in the book Sunburst and Luminary -- An Apollo Memoir by Don Eyles:  

-- Not long before the fatal Apollo 1 fire, an MIT colleague of Don Eyles had a drink with Astronaut Gus Grissom.  Grissom unloaded about the poor state of the spacecraft, saying that, "What we have here is a Heathkit."  Grissom died in the fire. 

-- Eyles mentions the use of 6L6 tubes in analog audio amplifiers. 

-- MIT's Doc Draper used a Minox camera.  

-- When the Apollo 11 astronauts came back and were living for two weeks in an isolation chamber, NASA had bulldozers on standby to bury the whole thing ("astronauts, staff and all") in case some dangerous moon bug was detected.  (Is that true?) 

-- At one point soon before an important missile test, engineers realized that they needed an isolation transformer.  They did not have enough time to order one.  So they took an isolation transformer out of one of their soldering stations and used it in the missile.  It worked. Sometimes you just use what you have on hand. 

A Low-Power (QRP) Contact from Australia to Spain (with video from both sides!)

A recent comment on the blog put me back in contact with an old friend of SolderSmoke:  Paul VK3HN.  Paul is an amazing homebrewer -- it was great to hear from him.   He sent along this video of a portable Summit on the Air activation from the Melbourne Australia area.   Paul managed to contact Ignacio EA2BD in Spain.  Ignacio was also running low power with a portable set up.  The remarkable thing is that we have video from both sides of the contact.  FB!  Thanks to Paul and Ignacio. 

Charlie Brown LIKES Static (with ITU paper on radio noise)

Because when he connects the antenna, it lets him know if he has enough amplification to hear the band noise.  He realizes that his radio receiver is not an I-phone, and that "static" is a feature, not a bug. FB Charlie Brown! 

Mike WN2A points to a 2022 ITU report on radio noise.  This report provides a LOT of information on noise (give it a few minutes to download!) and goes a long way toward explaining the usefulness of noise.

Here is the introduction. 

The ITU Radiocommunication Assembly, considering a) that radio noise sets a limit to the performance of radio systems; b) that the effective antenna noise figure, or antenna noise temperature, together with the amplitude probability distribution of the received noise envelope, are suitable parameters (almost always necessary, but sometimes not sufficient) for use in system performance analysis and design; c) that knowledge of radio emission from natural sources is required in: – evaluation of the effects of the atmosphere on radiowaves; – allocation of frequencies to remote sensing of the Earth’s environment; d) that radio noise from man-made sources is significant in setting the limit for some radio applications; e) methods for measurements of radio noise are given in Recommendation ITU-R SM.1753; f) methods for indoor noise environment measurements are given in Recommendation ITU-R SM.2093, recommends that the following information on the background levels of external radio noise should be used where appropriate in radio system design and analysis: 

https://www.itu.int/dms_pubrec/itu-r/rec/p/R-REC-P.372-16-202208-I!!PDF-E.pdf

A Pretty Good Troubleshoot -- Fixing the Transmitter in my 75/20 meter Mythbuster Transceiver -- Mind the Gap!

Bidirectional Termination Insensitive Amplifier by W7ZOI and K3NHI

All of a sudden the transmitter in my 75 & 20 meter dual band homebrew Mythbuster transceiver stopped working -- there was no output at all.  I went into troubleshooting mode.

The first clue was that the receiver was working fine. This meant that many stages of the rig were taken out of suspicion:  It probably wasn't the VFO, the first mixer, the BFO/Carrier Oscillator,  the second mixer, or the bandpass filters. Nor was it any of the receive sections in the bidirectional amplifiers I was using.  

Suspicion fell on the power amplifiers and on the transmit sections of the bilateral amplifiers.  

With the output going to a dummy load,  I put the rig into transmit mode and put a bit of audio into the mic jack.  Then with the 'scope I started to work my way back from the antenna jack.  I wasn't seeing anything.  Then I got back to the transmit side of the TIA amplifier between the crystal filter and the mixer.   There was a strong signal at the input, but nothing at the output.  Bingo!  I had found the faulty stage.  But where, exactly, had this stage gone wrong? 

There are three transistors on each side of a TIA amp (see schematic above) -- I just started from the input of the first one with my scope probe and moved through the circuit.  Finally, at the output of the last of the three amplifiers, the signal stopped.  I knew I was very close to the problem.  

Looking at the components, suddenly I could see the problem:  At the output there is a 47 ohm resistor (R2 in the circuit diagram above) and a .1uF cap in series.  The cap went to a Manhattan pad.  But when I looked at it closely, the lead was kind of floating above the pad.  See it? 

Mind the Gap 

And when I moved it, the connection between the 47 ohm resistor and its pad seemed quite flimsy. 

I quickly replaced both components and was back on the air. 

I don't really know how or why the lead to that capacitor broke.  Maybe I had bent it repeatedly, to the point of weakness, and, over time, it just let go.   

Whatever the cause,  I found this to be a satisfying troubleshoot and repair.  It required me to think a bit about what could be wrong, and to use some test gear to zero on on the faulty component.  

Out with the old...

A Cuban Knack Story, and a Pandemic (SITS!) SSB version of the DSB Jaguey Rig -- Viva el Cacharreo!

 

First, the Knack Story.  Andy CO2AFV clearly has The Dilbert Disease: 

Hello my name is Andy. I had an interest in Ham radio before knowing that existed.  While I was a child my entertainment was building quartz oscillators that later I tried to receive on neighbors' and friends' radios. One day I succeeded in modulating two of them and I finally established a conversation with a friend about 200 meters from my home!!!

Andy with his FB HB rig

Here's a description of a version of the 7 MHz Jaguey transceiver that Andy built during the pandemic.  It looks to me as if he took the Jaguey DSB rig and added a 455 kHz filter with an additional mixer to turn it into an SSB rig.  So he is generating the SSB at 455 kHz, and mixing it with a VFO running at around 6.8 MHz.  The sum output would put you in the 40 meter band; the difference output at around 6.35 MHz could (mostly) be knocked down by a bandpass filter.  I think the Cuban Radio Federation Web Site gets it a bit wrong -- the purpose of the filter is probably to eliminate the unneeded sideband, not really to suppress parasitics. 

Federation of Radio Amateurs of Cuba Published: September 17, 2020 Viewed: 2352 Comments: 12 

Radio Transceiver CO9BIA 455 A construction carried out in times of Pandemic by its author, Andy Fernández Valdespino (CO2AFV). 

Cuban radio amateurs continue to accept the challenge of isolation caused by the incidence of COVID-19, but this does not mean they paralyze their activities. Such is the case of Andy Fernández Valdespino (CO2AFV), who for more than four months has been working on the development and construction of a new transceiver, the CO9BIA 455, a device that already works perfectly in the 7 MHZ Band. 

Andy, who is technical secretary of one of the Havana Radio Clubs, has to his credit the construction of two Jagüey-type radio models, as well as several types of interfaces for programming and Digital Modes; and various prototypes of antennas, among other elements that make up its constant “cacharreo” activities, as we say in our language. 

He has now completed and tested a new model that he has named with the callsign of his Radio Club, CO9BIA, and the model 455 is due to the use in this prototype of a filter of the same capacity. Asked about the details and other construction bases of this radio, whose transmission and reception tests using only outputs from the driver were carried out on September 14, Fernández Valdespino pointed out that his objective was to build a portable QRP equipment, of very large proportions. small, that it would be capable of being operated in the 40 meter band on both sides, by incorporating an improved VFO from the traditional Jagüey, but this with some modifications, and that the radio in question would work powered by a 7-inch battery. .2 volt, the same ones that come with most of the “Handy” used by radio amateurs. 

To complete the “portability” characteristics of the new radio, the possibility of exchanging antennas has been incorporated, and a very light variant of the telescopic type can also be used, just over one and a half meters long. Andy explained that for the development of the new equipment, he was based on studies that he has been doing on some of the characteristics of the Jagüey, a direct conversion radio with very good sensitivity, but that does not have good selectivity, so in the conditions of the current solar cycle, its behavior is not optimal. In Jagüey, the signals, after being modulated, do not pass through any band-pass filter, which causes many “spurious” signals to be released into the ether, which represents an obstacle to be solved in order to incorporate a linear that can increase its output power. All of this, the creator assures, was taken into account for the construction of this new design. For example, in the transmission step, in the CO9BIA 455, the microphone signal is mixed, pre-amplified, filtered and re-amplified, until it is delivered to the 455 kHz filter, to finally be mixed with the VFO signal; and as a result of these steps, the sum and subtraction of these mixtures is obtained, which are in the order of 6 and 7 MHz. As a final result, after these signals are injected into the input bandpass filter, only one output is obtained of 7 MHz, whose operating segments are carried out through the use of the improved VFO. Given these characteristics, with which spurious signal outputs are reduced or eliminated, in this new radio it is feasible to add a linear that can raise the power to approximately 7 watts, which would adjust to the power conditions described above.

This experienced “clunker” says that for the development and construction of this transceiver, three fundamental aspects were combined: the first, applying the experiences of having built other radio models, to ensure that the new prototype could be built by any radio amateur. with minimal knowledge of electronics, using recycled components and materials. Secondly, he used and adapted parts of the construction schemes of a radio project called LU3DY, from the Argentine Radio Club “Almirante Brown”; and finally, the adaptation of some parts of the traditional Jagüey, such as the VFO board and circuit. Although, as already explained, the radio works, 

Andy Fernández is immersed in the construction of a small linear amplifier similar to the ARARIHNA project, by a Brazilian radio amateur, as well as making final adjustments to what is already a reality: the conclusion and final adjustments of the new CO9BIA 455 Transceiver, a portable QRP device for the 40 meter Band, developed in these times when we must all stay at home, to protect ourselves from COVID-19. 

By Luis Enrique Estrada Hernández (CO2BK) FRC Information System Coordinator 

Circuit details.  

The VFO Board

Here is the web site of the Federation of Cuban Radio Amateurs that describes Andy's work: 

https://www.frcuba.cu/filiales-grupos/la-habana/radio-transceptor-co9bia-455.html?fbclid=IwAR1DptfJdfAS5PSBbyMMUd6zjHo2EA3SHo7hhD1hUPRdtYVF29mKPD8dgPE

And I learned a very useful Spanish word through this:  "Cacharreo" is a Spanish word that means to tinker with something in an attempt to fix, mend, or improve it. 

Thanks Andy!  And thanks to  Trevor for alerting me to this great project.  

Sunburst and Luminary -- A Poem about Transistors and ICs

 

Sunburst and Luminary by Don Eyles has a lot of the kind of color that helps the reader understand what was going on technologically during the 1960s.  For example, there is this poem about integrated circuits (you don't get to use "poem" and "integrated circuits" in the same sentence very often): 

The transistor's a marvelous invention

Replaced the tube convention

        Found its niche

        To amplify or switch

Whatever the designer's intention. 

But the breakthrough was the IC

Integrated monolithically

        It became pivotal

        As computers went digital 

With increasing complexity. 

Eyles tells us that this poem was written by hardware designer Jayne Partridge, and appears in Eldon Hall's write-up of the Apollo Guidance Computer and the decision to use ICs in it: 

https://www.amazon.com/Journey-Moon-Guidance-Computer-1996-09-03/dp/B01F9FSN7C  

Another Evaluation of the TinySA Ultra (with Teardown) (Video)

More info on using the TinySA Ultra. 

-- Makes me wonder if it makes sense for me NOT to enable Ultra mode now.  I am not going into the UHF range.

-- Waterfall!  Sig Gen! 

-- Kerry got a lot of distortion when listening to FM broadcast signals.  I wonder if this is due to the Tiny SA detector being an AM detector? 

-- Teardown was very cool.  

-- Comparison to the HP spectrum analyser was very illuminating.  Bottom line:  TinySA Ultra gives you a lot of capability for $150.  

 

"Sunburst and Luminary" author Don Eyles was a Ham, a Hacker, and a user of Plywood who Understood Juju

-- As a kid, Eyles took a summertime shop class with W4LRO.  Eyles himself went on to get his ham license -- he was K4ZHF and was active for a while on the 40 meter and 6 meter bands. 

-- He writes of how the Apollo software acquired more "juju as labor and logic were poured into them." Juju. 

-- He describes the electronics lab in the MIT Instrumentation Laboratory: "If you had a private project you could sometimes get some simple milling done for a smile, and you could scrounge the odd resistor or capacitor... On the second floor there was a small "hackers shop" with a drill press, metal shear, a bending brake, and a few hand tools which was open to anyone, including software engineers. That was the first use of the term "hack" in a technical context, that I can recall hearing. I took the term as referring to the sometimes messy process by which perforations of suitable sizes were made in the aluminum boxes, or chassis, that were used for constructing electronic devices."  Indeed.  We hack.   

-- After describing the first integrated circuits, Eyles looks back at high school and notes that he and a friend, "after learning about truth tables, James Chambers and I had experimented with similar devices composed of relays mounted on a piece of plywood."  Plywood.  

  

More to follow on this book. 

Bezos Bucks! New Amazon Link Working Well! Please use it!

 

Click on image for a better view

In the graph above you can see the Amazon Associates stats for SolderSmoke.  While obviously I'm not going to get rich on this, it is nice to see that the new Amazon Associates link is working well.  Note the difference between early September and late September. 

The link is over here >>>>>>>>>>>>>>>>>>>>>>>>>>>>>

You can use it to buy anything on Amazon (not just the item that is advertised).  Just start your search from the Amazon link on the right hand column of this blog, and buy the item within 24 hours of entry into the Amazon system and -- CHA CHING for SolderSmoke!  Thanks.