Homebrew-to-Homebrew Contact on 17 meters with DL2RMM (Video)

 Here is short clip of a very cool HB2HB contact on 17 meters.  Thanks Jens! 

Check out his QRZ page here: https://www.qrz.com/db/DL2RMM

Woebot -- An AI-Based Therapy Bot for Us?

 

This was on 60 Minutes last night.  Of course it made me think of our many "Tales of Woe."  Perhaps this could be of use to us.   But I wonder how the bot would react to our typical problems: 

"I am feeling bad about myself becasue my RF amplifier keeps going into oscillation.  What should I do?"

"My opposite sideband suppression is inadequate because my filter skirts are too wide. What is your advice?" 

"My LC VFO drifts slightly and my SDR-using friends taunt me about this.  I feel dejected.  What should I do?"  

"The Raspberry Pi in my SDR rig is hallucinating and I can't find the needed wisdom files. Is there a support group for this?" 

"I have discovered spurs in the output of my transmitter.  They are 60 db down, but I still can't stop thinking about them.  What should I do?"

I can't help thinking that if Jean Shepherd had access to something like this, his Heising modulator trouble might not have spoiled his date with the girl from his school.  

What do you guys think about the Woebot?  

The Doug DeMaw Article that got me into Homebrew Double-Sideband

Just click on the images for a better view

Pete WB9FLW asked for this.  This was an important article for me -- it paved the way for my entry into homebrew phone gear -- this article was the basis for my first DSB transmitter, built in the Azores. 

I think Doug was a bit optimistic in saying that SSB operation was possible with this rig.  Maybe it was possible for Doug, but for most of us DSB is just a LOT easier to get going than SSB.  (I know that some people don't believe this, but I note that most of these folks have built neither DSB nor SSB rigs.  It always seems easier before you start to melt solder.)  

Be sure to check out the 10 meter DSB rig recently built by Mike WU2D.  He has 6 or 7 good videos on this project, including this one: https://www.youtube.com/watch?v=xThoAMv4zrw

Another CW Contact with the SupeRX/TX 40 (Video)

I changed the crystal in the transmitter.  I got a different rock from Mouser and am now on 7030.  

Wednesday April 3, 2024. On 40 meters in the afternoon with Mike KM4KY in North Carolina.

The Road to Perdition -- High Voltage Thermatron Perdition

Yuck -- Not mine

In the AWA Bulletins that Armand gave me at Winterfest, I saw mention of an AWA PC Board intended to allow for the upgrade of the venerable Heathkit HP-23 power supply.  

I have an HP-23B.  It came with my HW-101.   I replaced the capacitors in the supply many years ago, but they were of marginal voltage specs back then (I think I was in the Dominican Republic) and they have likely dried out considerably since then.  I am nervous about firing this thing up.  I fear for the big transformer... 

So I'm going to order the AWA's upgrade PCB.  

Of course, the danger (!) is that this could lead me back into the world of high voltage thermatrons.  That HW-101 has been taunting me for years.  It NEEDS restoration.  The first step would be to fix up the Power Supply. 

https://www.antiquewireless.org/homepage/pcb-item-10/

73.  And one hand behind your back OM.  

MXM SupeRX/TX 40 Rig Info

 

My SupeRX/TX 40 -- now on 7030 kHz

Click on schematics for a better view

Details on the receiver: https://archive.org/details/73-magazine-1991-04

Details on the transmiiter: https://archive.org/details/73-magazine-1991-12/page/10/mode/2up

Article on MXM Industries of Smithville,Texas:  

https://www.worldradiohistory.com/Hambrew_Magazine.htm

Click on images for a better view

Click on images for a better view

Ian Keyser G3ROO and Spy Radios

Above is a recent ICQ podcast interview with Ian. 

Here is a slightly older interview with Ian: https://www.itv.com/news/meridian/2018-10-19/daring-spies-who-broadcast-from-behind-enemy-lines

This sojoun into spy land started with this WTF video: https://www.youtube.com/watch?v=4f3ZJYdmpZw

Crypto Museum explains what the Mk 301 was all about:  https://www.cryptomuseum.com/spy/mk301/index.htm

 I have had Ian on the SolderSmoke blog several times: https://soldersmoke.blogspot.com/search?q=%22Ian+Keyser%22

N2CQR at the key with a G3ROO paraset

SolderSmoke Podcast #251 Aurora! CBLA, Winterfest, Legal Action Against SolderSmoke, HB sBITX, SDR, Raspberry Pi, Rounded Passbands, MAILBAG

Aurora Picture by Dean KK4DAS

SolderSmoke Podcast #251  4-1-2024

Audio: http://soldersmoke.com/soldersmoke251.mp3

Videos: Podcast 251 Aurora! CBLA, Winterfest, Legal Threat, sBITX, SDR, RaspPi, Rounded Passbands, MAILBAG (youtube.com)

Travelouge:  Dean goes to the North Pole to see Aurora. 

A CBLA Call to Arms! 

Winterfest.  Lots of goodies.  MXM Industries 40 meter transceiver. 1 dollar. 

Jean Shepherd. Recording of Bill talking to Shep in 1976. 

 https://soldersmoke.blogspot.com/2024/03/listen-to-me-talking-to-jean-shepherd.html

Legal Trouble: Could put us out of operation for a while.  We need listener input. 

November 2023

December 2023

----------------------

Pete's Bench

Homebrew SDR (based on Zl2CTM’s original design) and how good it sounds.

Raspberry Pi Zero W is now working on FT-8 with digital adapter.

Ferrite Cores at Digi-Key (a replacement for the FT-37-43 where  you buy 100 and the price is 21 cents/each)

ADE-6 –great specs in HF but more expensive than the ADE-1

For Pete's recent blog posts, go to this site and click on "Archive" in the right column: 

https://n6qw.blogspot.com/2024/03/march-31-2924-happy-easter-to-those-who.html

----------------

Dean's Bench 

sBITX progress, McGyver-ing a lifted pad, replacing crystal on the CODEC board, sBITX success! See: 

https://kk4das.blogspot.com/2024/03/homebrew-sbitx-tx-modules-pa-lpf-and-mic.html

--------------------

Shameless Commerce Division:  Please use the Amazon link on the blog to start your Amazon purchases. And please consider using Patreon to support the podcast and blog.  We try to send extra content to our Patreon supporters. Mostly DIY RF --  Boards, Kits and Pete's PSSST

---------------------

Bill's Bench

More trouble with the 15-10 rig.  Rounded passbands in 25 MHz filter. See figure 4 in both links: 

https://www.arrl.org/files/file/QEX_Next_Issue/Nov-Dec_2009/QEX_Nov-Dec_09_Feature.pdf

https://www.networksciences.com/pdfs/tutorial.pdf

Experimenting with Balanced Mixers and Product Detectors. Paul VK3HN  Suggests the MC1496 chip; Walter KA4KXX points to SSDRA circuits

But it is on the air!  Using the PA from a BITX40 module and an RD06.  

Put an OLD dial from Pericles HI8P on 15-10 version 1.  Soul in the new machine.

Pericles' Dial on the 15-10 Rig 

Mailbag: 

Grayson KJ7UM's Hollowstate video. 

Mike WU2D's amazing 10 meter DSB transceiver. 

Jack AI4SV (Dhaka Jack) liked video of recent QSO with AzoresDSB rig

Mike AA1TJ and Dave AA7EE on backwaves and 100 uW QRPpppp

Dave G3UUR  on my curved passband problem

Alan W2AEW heard my only QSO with the MXM indsutries SupeRX/TX40

Wes W7ZOI, Mike WN2A, Walter KA4KXX. Farhan VU2ESE on passband, 

Ramakrishnan sent article about Charles Proteus Steinmetz.  Beautiful. 

Justin AC8LV built a receiver!  FB. 

San Francisco QRP:   KDOFNR TouCans Rig, and N6ASD Zinc-Oxide TX

Frank KC8JJL -- Another guy who heard first ham sigs from a homebrew rig. 

Nate KA1MUQ's homebrew thermatron superhet

Dino KL0S sent info on the PAL CB VFO I picked up at Winterfest. Airborne! 

Bob W8SX will be once again doing SolderSmoke interviews at Dayton.  Thanks Bob

Peter VK2EMU  Always good to hear from him.

Tobias Feltus -- Wisdom teeth removed, wondering if he will get sBITX hallucinations...

Rick WD5L continues to work on his Herring Aid 5

Ciprian YO6DXE wants to learn CW. No alerts from his FB Blog!

Todd K7TFC -- Likes CW, says it eliminates the Blah-Blah-Blah 

F1BFU's Amazing PSSST VFO

A QRP CW Contact (Video) with the Winterfest MXM SupeRX/TX 40 (1 Watt, Crystal Controlled Transmitter)

I picked this transceiver up at Winterfest for one dollar. 40 meters. Superhet receiver with 455 kc ceramic filter and 2 NE602s. Crystal controlled one watt transmitter on 7039.5 kc. I emailed Jeff KA2BKG and asked him to slide up a bit to my freq. I am glad he did. Thanks Jeff.

KD0FNR's Amazing San Francisco TouCans Rig -- A Rockmite and a Tuna Topper in a Pineapple Can Mounted on the Dipole in a Shopping Bag

Click on the image for a better look

This post has a definite San Francisco vibe. 

Hamilton KD0FNR appeared on the SolderSmoke blog way back in 2011.  Perhaps he should join forces with N6ASD who lives quite close to him in SF, and seems to share radio interests.  Also in their area is the esteemed Bay Areas blogger and homebrewer Dave AA7EE ; Dave recently sounded the CBLA alarm, alerting us to the presence of an intruder on 3579 kHz.  In the process, Dave mentioned the Pt. Reyes Web SDR, the presence of which came as welcome news to Hamilton. Finally, Dave and Hamilton mention the KPH Web SDR, which brings to mind Dick Dillman W6AWO who has been on the SolderSmoke blog several times.  

Hamilton and his kids have their rig (a Rockmite and a Tuna Topper in a Dole Pineapple can) mounted at the feedpoint of their dipole (in the red shopping bag above).   They link to it via WiFi and Bluetooth. FB.  Thomas Witherspoon has a nice presentation (by KD0FNR) of the TouCans project on his blog: https://qrper.com/2023/12/field-radio-kit-gallery-kd0fnrs-rockmite-20-and-tuna-topper/ 

Hamilton KD0FNR writes: 

At the moment, the kids whose dad I am, better known as the gang—12, 10, and 8 year-old Diaze, Mota, and Tawnse.. all internet aliases—are big into 20 meters QRP CW with Project TouCans, a Rockmite coupled to a Tuna Topper. The radio and the amp that popped us out of QRPp to plain-old QRP are both housed in a Dole Pineapple can with a tuna can as a cover and antenna mount. The whole rig is still very much mounted in our half-wave dipole! 

Project TouCans consists of a Rockmite feeding a 5 Watt Tuna Topper, all of which is housed in our dipole antenna. The Rockmite has a single crystal bandpass filter on it's rx input. That makes it a pretty wide reciever which is fine, but it's particularly sensitive to its tx frequencies, 14075.5 and 14058 kHz AND—for some reason I have yet to understand—10459 kHz. By watching the SDRs that now—thanks Dave—envelope us here at our home QTH in San Francisco, we can see the frequencies of incoming signals. That information keeps me from responding to 14059 kHz signals in vain.

And now, the headphone repeater: TouCans is completely wireless with respect to the ground. That means there's no power line, no feedline, no keyer lines and no headphone line. Keyer controls are handled via wifi to a Raspberry Pi Pico-W on the rig while audio is brought back to my headphones via Bluetooth. Power is provided by a USB-C battery pack that lives in the rig which is mounted above us in the antenna. (Yes, all of this is becuase I thought feedlines matches and baluns were too mystical and hard to understand years ago. Yes, this has probably all been more work than a balun. Yes, I am still totally enamored of my original design decision. :) ) Anyway, the bluetooth range is about 50 feet and the wifi range is shorter than that. The short of it is—pun not intended—that I can't quite use the rig while I'm in my office. But, I can send CQ to the rig every half minute or so via a memory keyer, then turn on the SDR in my office, and then sprint a bit closer to the rig when someone calls back. (It helps that houses in SF are a bit tiny.) So, SDRs are kinda an integral part of our QTH setup and it's awesome to learn about a new—to us—one! Thanks again!

How to Feel Bad about Carrier Suppression (and How to Get Over It)

Version 2 of the 15-10 rig continues to give me trouble.  But I guess it is "good trouble" because I am learning from it. 

You see, after you build an SSB rig, one of the critical alignment steps is the placement of the carrier oscillator/BFO frequency in relation to the filter passband.  (The IMSAI Guy has a good video on this -- see above.)  You want to place this oscillator somewhere on the downward skirt of the passband curve.  This will add to the carrier suppression already done by your balanced modulator.  There will always be some carrier remaining from the balanced modulator -- putting the oscillator frequency on the downward skirt of the filter passband adds to the suppression the carrier remnant.  

But you can't overdo it.   If you place that carrier oscillator frequency too far down on the skirt, you will start to cutoff the low audio frequencies in your transmit and received signals.  You will notice that your once beautiful sounding receiver suddenly sounds tinny and high pitched.  Yuck. 

So you go back to the books and the websites.  You look at the passband promissed by the Dishal software you used to design the filter.  See below:  

Click on the image for a better view

Surely with a passband as nice as that one, you will be able to find the sweet spot where the carrier is suppressed and your audio remains pristine.  

But I couldn't do this with the 15-10 rig.  I was forced to compromise: I had to accept less than optimal carrier suppression for less than optimal low frequency passband coverage.  And here is why:

Click on the image for a better view

The curve above is a much more realistic picture of what my filter passband actually looks like (see NanoVNA picture below).  The curve above is from the AADE software.  I found out that the Dishal software DOES NOT factor in important things like Q or ESR.  Dishal treats all crystals as "loss-less radiators."  So when you get up to 25 MHz where Q is important, AADE and other programs will show you that your passband has become curved.  And you can see how this curvature makes it difficult to get the kind of carrier suppression and audio response we want.  

What my filter looked like in a Nano VNA

Click for a better view

Look, the rigs work OK.  The receivers sound good to me.  The carrier is so far down that no one can hear it.  I have to remind myself that we are using 'SSB-SC" -- suppressed carrier, not eliminated carrier.  I've worked a lot of DX with these rigs.  But still,  I would like to improve the situation.  It kind of bothers me.  Homebrewers will understand. 

I have been experimenting with different balanced modulators.  I started with the simple two diode, single transformer, singly balanced design from Farhan's BITX20.  It works fine.  But I think I get a bit better suppresson from a doubly balanced diode ring.  I may try an NE602 Gilbert Cell.   I may also try to build a higher Q 25 MHz filter using low-ESR surface mount crystals from Mouser.  Stay tuned.  

Thanks to W7ZOI, VU2ESE, WN2A, KA4KXX, KK4DAS, N6QW, W2AEW, and G3UUR for all the good advice and encouragement.  Please put any additional ideas in the comments below.  

CBLA: A CALL TO ARMS!

Dave AA7EE alerted us to this attack.  Please follow-up by posting reception reports (and triangulations!) in the comments below.  Dave writes:  

Recently, an unlicensed beacon (for which read pirate) has turned up on 3579 KHz. It seems to be located somewhere in the Western US, in the tradition of unlicensed HF beacons dating back to the late 80's that were solar-powered, and located in remote areas of the Southwestern deserts. The very first ones were a cluster of beacons around 4096 KHz (a frequency for which crystals were cheaply and easily available).

Anyway, I am equal parts intrigued and miffed by this latest clandestine operation. Intrigued because of the mystery surrounding all such clandestine operations. Where is it? What does it look like? Who built it, and why? I'm also miffed because, well, dagnabbit - it's on our turf!

It can be heard nightly after dark in the West, on both the KFS and KPH SDR's, in Half Moon Bay and Point Reyes respectively. It sends a series of 22 dits, then the call letters KOK, then more dits.

This is an outrage, a travesty, and a direct assault on the sovereignty of all self-respecting CBLA recruits! I call on all denizens of colorburst land to dust off their Michigan Mighty Mites and other plucky little transmitters, and launch the loud, raucous battle cries of  CQ, CQ, CQ into the ether. We shall fight them on the airwaves, we shall fight them in our radio shacks while drinking hot chocolate, winding toroids, and reading QST. We shall go on to the end. We shall never surrender!

I'm telling you Bill, when the very foundations of our existence are threatened, there is nothing that a colorburst crystal and half a watt from a 2N3053 transistor can't achieve. By golly, we can do this.

Your obedient colorburst servant,

Dave

AA7EE