The Nanomembrane Laser Detector Receiver

 



I like it!  Here we find some cutting edge radio technology that does not involve millions of microscopic transistors and thousands of lines of code. And it can be explained in a few paragraphs without resort to exotic math.  It even makes use of our beloved LC resonant circuit.  Quick, where did I put Billy's green laser?  And where can I get some silicon nitride? 
  
http://m.technologyreview.com/view/517336/physicists-detect-radio-waves-with-light/

Thanks to Jim, AB3CV, for sending us this.

Our book: "SolderSmoke -- Global Adventures in Wireless Electronics" http://soldersmoke.com/book.htm Our coffee mugs, T-Shirts, bumper stickers: http://www.cafepress.com/SolderSmoke Our Book Store: http://astore.amazon.com/contracross-20

Earth as seen from Saturn

Look closely.  We're the little dot.  Photo taken July 19 2013 by the Cassini probe.   People were waving!  Really:  http://www.newscientist.com/article/dn23914-shiny-happy-earth-photobombs-saturn-snapshot.html?cmpid=RSS|NSNS|2012-GLOBAL|online-news#.Ue2_i2DD-ic


Our book: "SolderSmoke -- Global Adventures in Wireless Electronics" http://soldersmoke.com/book.htm Our coffee mugs, T-Shirts, bumper stickers: http://www.cafepress.com/SolderSmoke Our Book Store: http://astore.amazon.com/contracross-20

Tour of WLW 500,000 Watt Transmitter (video)

Well, you know that you are really in the high power big leagues when your transmitter requires a cooling pond, and you have to put on welding goggles before you examine your tubes!  I especially liked the bit about how they built the transmitter BUILDING from the packing materials used to ship the transmitter (my operating desk is made from a box used to ship my HT-37!). 

This is all really amazing.  They built this thing less than ten years after the initial launch of commercial broadcast radio in the U.S. 

Thanks a lot to Randy for doing this video and to the guys who gave the really excellent tour.

My apologies to the QRP purists who I know will have been deeply disturbed by this presentation.

Our book: "SolderSmoke -- Global Adventures in Wireless Electronics" http://soldersmoke.com/book.htm Our coffee mugs, T-Shirts, bumper stickers: http://www.cafepress.com/SolderSmoke Our Book Store: http://astore.amazon.com/contracross-20

Oldest Drake 2B? (now with pictures)

Bill and Soldersmoke readers,

One of the earliest and still surviving Drake 2Bs is owned by Paul Brock (K4MSG) of Hamilton, Virginia.

Paul is very much into Boat Anchor Ownership and Restoration.  

 

If you are interested, look at his write-up titled “The Magic of Boatanchors” http://www.k4lrg.org/Projects/Magic_of_Boatanchors/index.html

 

 

K4MSG’s Drake 2B Receiver s/n 2052

 

In my perspective, this receiver is still an absolute “Keeper.”  

If anyone has a Drake 2B older than Paul’s,  we’d love to see it.

We have all surmised that the first 2B was serial number 2000, from the first production run back in April 1961.

Paul’s radio could have easily been one of the first receivers to hit the market.

 

Interesting sidebar; The early 2B and 2As do not have the red scale log scale adjustor button.  

 

I remember these when they first hit the market. They seemed so small compared to the Hammarlund, Hallicrafters and National triple conversion receivers from the same era.

Most Old Timers felt they were not going to get their monies worth with a tiny receiver sitting next to their big 60 to 100 Lb. transmitter.

In 1962, this was a very modern radio both in style and performance. Coupled with the Q-Multiplier/Speaker you had a superb receiver which worked extremely well on C.W., A.M. and S.S.B.

 

My first experience with the Drake 2 B came at Skyview Radio Club near the Pittsburgh, Pa area back in 1965.

 

 

 

Here is one of those early ads that show the Drake 2B without the Red Scale Slider Button.

 

 

 

 

Happy building and melting solder everyone.

 

73’s De -=WA3EIB=- Harv. Albq., NM

 

Our book: "SolderSmoke -- Global Adventures in Wireless Electronics" http://soldersmoke.com/book.htm Our coffee mugs, T-Shirts, bumper stickers: http://www.cafepress.com/SolderSmoke Our Book Store: http://astore.amazon.com/contracross-20

SolderSmoke book for $16

QST gave the book a very nice review in their August edition.  But they got the price of the paper edition wrong -- it is definitely not $45!  The normal price is $20, but with the coupon code SOCIUS you can get it for $16 through 19 July. 
http://www.lulu.com/spotlight/soldersmoke

Our book: "SolderSmoke -- Global Adventures in Wireless Electronics" http://soldersmoke.com/book.htm Our coffee mugs, T-Shirts, bumper stickers: http://www.cafepress.com/SolderSmoke Our Book Store: http://astore.amazon.com/contracross-20

Grayson's Thermatron Timeline

Our friend Grayson put a lot of effort into this very interesting timeline of tubes (aka valves, or thermatrons).  Thanks Grayson!

http://hollowstatedesign.tumblr.com/

Our book: "SolderSmoke -- Global Adventures in Wireless Electronics" http://soldersmoke.com/book.htm Our coffee mugs, T-Shirts, bumper stickers: http://www.cafepress.com/SolderSmoke Our Book Store: http://astore.amazon.com/contracross-20

book review in qst? GOT IT

Thanks to those who sent me the review.   Got it. 


I heard the August qst has a review of the soldersmoke book. I'm away
from home. Could someone email me the review? Thanks 73

"I Make Stuff" Chuck Stottlemyer (video)

More about Chuck Stottlemyer here:
http://makezine.com/2013/07/02/movers-and-makers-charles-chuck-stottlemyer/

Our book: "SolderSmoke -- Global Adventures in Wireless Electronics" http://soldersmoke.com/book.htm Our coffee mugs, T-Shirts, bumper stickers: http://www.cafepress.com/SolderSmoke Our Book Store: http://astore.amazon.com/contracross-20

A Visit to the Arduino Factory (video)

Named for an Italian bar, produced by cool people in Ivrea who wield soldering irons and wear T-shirts that say "Make it Simple."  You gotta love Arduino! 

Today I will finish connecting my Arduino Uno to my Doug Demaw Lil' Slugger 10 Beacon rig.  Code (computer code!) by K6HX. 

Our book: "SolderSmoke -- Global Adventures in Wireless Electronics" http://soldersmoke.com/book.htm Our coffee mugs, T-Shirts, bumper stickers: http://www.cafepress.com/SolderSmoke Our Book Store: http://astore.amazon.com/contracross-20

Knack Book News: New Blog, 25% off Sale

Our friend Grayson has launched a blog related to his new book Hollow-State Design:
http://hollowstatedesign.tumblr.com/

Over the 4th of July holiday you can save 25% on two of Lulu's GREATEST Knack-related books.  Just use the coupon code FIREWORKS when making your payment. 

For SolderSmoke:  http://www.lulu.com/spotlight/soldersmoke

For Hollow-State Design: http://www.lulu.com/shop/grayson-evans/hollow-state-design/paperback/product-20987562.html


Our book: "SolderSmoke -- Global Adventures in Wireless Electronics" http://soldersmoke.com/book.htm Our coffee mugs, T-Shirts, bumper stickers: http://www.cafepress.com/SolderSmoke Our Book Store: http://astore.amazon.com/contracross-20

The Society for Model and Experimental Engineers

Wow.  Stop what you are doing and take a look at the four short films about a group of intrepid British knack victims.  Very nicely done.  Really captures the allure of the shack/workshop.

http://makezine.com/2013/06/28/the-makers-of-things-2/




Our book: "SolderSmoke -- Global Adventures in Wireless Electronics" http://soldersmoke.com/book.htm Our coffee mugs, T-Shirts, bumper stickers: http://www.cafepress.com/SolderSmoke Our Book Store: http://astore.amazon.com/contracross-20

Arduino Sidecar (instead of a Shield)

In my last post I described my Arduino Keyer Kludge.  In that project I didn't use the standard "shield" board that normally sits atop the Arduino board.  I had used a shield in an earlier project and I didn't really like it.   I prefer to have all the electronics and connections on the top of the board -- this makes for easier experimentation and modification.  

Above you can see my "sidecar" technique.  I build the circuit on a piece of copper clad board using isolation pads superglued to the copper (aka "Manhattan style").   For the Arduino board, I just superglue a piece of balsa wood to the copper clad board, and attach the Arduino board to the balsa with small wood screws.  Electrical connections from the Arduino to the sidecar just go from the Arduino pins to the appropriate points in the sidecar circuit via small-gauge wire.  

Our book: "SolderSmoke -- Global Adventures in Wireless Electronics" http://soldersmoke.com/book.htm Our coffee mugs, T-Shirts, bumper stickers: http://www.cafepress.com/SolderSmoke Our Book Store: http://astore.amazon.com/contracross-20

Paddle Output Arduino Keyer Kludge (video)

Ooops -- I got my keyer terminology wrong in this video.   The K1EL keyer just needs a "paddle keyer" input, not an iambic keyer.   One line is brought to ground for dots, another for dashes. (With an iambic keyer, if you make both contacts at the same time you get a string of alternating dots and dashes.)  My homebrew cootie keyer did the job, but I wasn't very proficient, hence the need for this digital kludge. I also got the name of the Arduino guru wrong: he is Massimo Banzi.  Mi dispiace Massimo.   


Our book: "SolderSmoke -- Global Adventures in Wireless Electronics" http://soldersmoke.com/book.htm Our coffee mugs, T-Shirts, bumper stickers: http://www.cafepress.com/SolderSmoke Our Book Store: http://astore.amazon.com/contracross-20

SolderSmoke Podcast #153 -- SPECIAL FDIM PODCAST

SolderSmoke Podcast #153 is available for download:

http://soldersmoke.com/soldersmoke153.mp3

June 22, 2013 

Manassas Hamfest
Building a Balanced Modulator in LTSpice
Peter Parker's Minimalist SDR receiver
Alberto I2PHD's SDRadio program
My Arduous Arduino Adventure:  Sig Generator
MAR-1 amplifier chip
WSPRing again (the sound of WSPR)
Broadening my Barebones Superhet for phone
Cliff Stoll on Kludge vs. Kluge
FDIM INTERVIEWS:
G3RJV on one and done projects, Sodder vs. SoLder, Regens
G3VTT plays SolderSmoke for his students
NM0S on new Four States PTO rig
K0NEB on kit building techniques
NH6Z on high performance SDR
KK7B on hard rock rigs, modular construction and understanding
I2RTF Saluti a tutti!
W7EL on EZNEC, Dilbert, and escaping the Cube Farm
W1REX on QRP as a creative outlet,  Knack to the Max!

 

SPECIAL THANKS TO SOLDERSMOKE'S DAYTON CORRESPONDENT:

BOB CRANE, W8SX

Our book: "SolderSmoke -- Global Adventures in Wireless Electronics" http://soldersmoke.com/book.htm Our coffee mugs, T-Shirts, bumper stickers: http://www.cafepress.com/SolderSmoke Our Book Store: http://astore.amazon.com/contracross-20

A Billion Pixels From Mars

Don't miss the hi-res version.  Link and background info here:
http://www.jpl.nasa.gov/news/news.php?release=2013-205&cid=release_2013-205


Our book: "SolderSmoke -- Global Adventures in Wireless Electronics" http://soldersmoke.com/book.htm Our coffee mugs, T-Shirts, bumper stickers: http://www.cafepress.com/SolderSmoke Our Book Store: http://astore.amazon.com/contracross-20

Feynman's Red Book (on the Sino-Indian Frontier)

Today I bought a copy of "Feynman's Tips on Physics."   I wasn't sure about buying it, but this story in Ralph Leighton's foreword convinced me:  

"At a lonely border post high on the Himalayan frontier, Ramaswamy Balasubramanian peered through his binoculars at the People's Liberation Army soldiers stationed in Tibet ― who were peering through their scopes back at him. Tensions between India and China had been high for several years since 1962, when the two countries traded shots across their disputed border. The PLA soldiers, knowing they were being watched, taunted Balasubramanian and his fellow Indian soldiers by shaking, defiantly, high in the air their pocket-sized, bright-red copies of Quotations from Chairman Mao ― better known in the West as "Mao's Little Red Book."

Balasubramanian, then a conscript studying physics in his spare time, soon grew tired of these taunts. So one day, he came to his observation post prepared with a suitable rejoinder. As soon as the PLA soldiers started waving Mao's Little Red Book in the air again, he and two fellow Indian soldiers picked up and held aloft the three, big, bright-red volumes of The Feynman Lectures on Physics.

One day I received a letter from Mr. Balasubramanian.  His was among the hundreds I have received through the years describing the lasting impact Richard Feynman has had on people's lives.  After describing the "red-books" incident on the Sino-Indian Frontier, he wrote, 'Now, twenty years later, whose red books are still being read?' "   

Our book: "SolderSmoke -- Global Adventures in Wireless Electronics" http://soldersmoke.com/book.htm Our coffee mugs, T-Shirts, bumper stickers: http://www.cafepress.com/SolderSmoke Our Book Store: http://astore.amazon.com/contracross-20

The Jamesburg Dish

Mama mia!  That's an antenna!  This is the skyhook that the very hip people in yesterday's video (scroll down) are using to send very cool messages to Gliese 526.  With a setup like that, they may have a shot at a QSO!  

More on the antenna here: http://www.jamesburgdish.org/

As I suspected, real hams (not the hipsters!) are doing the tech work. 
 
Our book: "SolderSmoke -- Global Adventures in Wireless Electronics" http://soldersmoke.com/book.htm Our coffee mugs, T-Shirts, bumper stickers: http://www.cafepress.com/SolderSmoke Our Book Store: http://astore.amazon.com/contracross-20

LONE SIGNAL: SETI gets cool. Perhaps TOO cool! (VIDEO)

Slashdot alerted me to this new SETI-like effort to communicate with extraterrestrial civilizations.  It is called LONE SIGNAL.  Check out their video (above and here:
http://youtu.be/M-XcrnSKUog )

http://news.discovery.com/space/alien-life-exoplanets/crowd-funded-radio-beacon-will-message-aliens-130612.htm

The project has many features that put it in the traditional SolderSmoke area of interest, especially  "the use of a re-furbished radio telescope."   But one look at their video (click above) made me think that perhaps these folks are just too cool for a project like this.  I somehow can't see ANY of these people using a soldering iron.  On the other hand, if WE had videos like this, maybe we'd be able to bring more young people into ham radio!  Yea!  Why can't we be cool too? How about it, ARRL?


Our book: "SolderSmoke -- Global Adventures in Wireless Electronics" http://soldersmoke.com/book.htm Our coffee mugs, T-Shirts, bumper stickers: http://www.cafepress.com/SolderSmoke Our Book Store: http://astore.amazon.com/contracross-20

The Manassas Hamfest

Elisa heroically accompanied me to the Manassas Hamfest on Sunday.  We had fun.  I thought they had a good turnout of vendors and tailgaters, and it seemed like the sellers of real ham stuff were winning the battle against the encroaching computer people.  I saw many interesting old boatanchor radios, including two R-390A receivers, one HT-37, an HW-101 and several other Heathkits.

As for NEW technology, the fellows from the NOVA LABS maker space had a very interesting table, and their web site has a very kind acknowledgement that hams were "the original hackers, who organized build groups and hack labs similar to modern day makerspaces—back before people called themselves “Makers” and long before it was “cool.”  They had a 3-D printer that was doing its thing in a very impressive manner.  They also had some quadro- and octo-copters built by a group called DC Area Drone User Group.   Very cool.  Want one.

Inspired by Nick Kennedy, I have included in this post a picture of my purchases from the hamfest.  As you can see, I controlled myself.  But I couldn't resist the humungous flashlight!  I got a bunch of .1 caps (should have bought more!).  Got a Bud-box (maybe for an Arduino DDS project?)  The little circuit board with the IF cans is interesting.  I bought it (1 dollar!) for the 365 pf variable  cap, but I later realized that it is probably a complete All-American Five receiver on a single board.  I'm not crazy about tubes on PC boards, but this one may have some possibilities.  The roll of tape is supposedly coax sealer.  I also got a little 35 mm slide viewer, and a 12 volt wall wart.

I wore the "Real Radios Glow in the Dark" T-shirt that Elisa got me (on the recommendation of Rogier).  I got more positive comments on that shirt than on any other piece of clothing I've ever owned!

And we saw our first Cicadas of this 17 year cycle. 

Our book: "SolderSmoke -- Global Adventures in Wireless Electronics" http://soldersmoke.com/book.htm Our coffee mugs, T-Shirts, bumper stickers: http://www.cafepress.com/SolderSmoke Our Book Store: http://astore.amazon.com/contracross-20

OOPS! Why the AD9850 DDS Boards are So Inexpensive

N3ZI has a very plausible explanation for the low price (about 9 bucks!):

My guess is that this is a liquidation due to a design build error, since they are being sold for a price of about 1/2 the price of the DDS chip alone. The modules are assembled and tested. The design error I noticed is that the wrong output filter is used. These boards use the 9850 running at 125MHz. A 125MHz DDS should have a 50MHz LPF, but it seems that these modules have the 75MHz LPF the chip maker recommends for the AD9851 running at 180MHz. My guess is, someone just copied the wrong filter from the wrong data sheet, and it wasn't caught until they went into production.
But for amateur radio applications they work fine up to about 40MHz. You can push them to 50MHz by adding a correcting filter, which is included in my controller PCB, but the output level is low in the 40-50MHz range.

N3ZI continues to offer some really interesting microcontroller products.  He has a controller board that allows you to simultaneously control TWO AD9850 boards.  This might be exactly what we need when we have a separate receiver and transmitter with different intermediate frequencies: Set up one board with the VFO freq for the receiver and the other for the transmitter with the resulting operating freq displayed on the LCD.  Viola! No more "Spot" or "net" and zero-beat by ear! (But I may be one of the last people on the planet still doing this!)   

N3ZI's site:  http://www.pongrance.com/

Our book: "SolderSmoke -- Global Adventures in Wireless Electronics" http://soldersmoke.com/book.htm Our coffee mugs, T-Shirts, bumper stickers: http://www.cafepress.com/SolderSmoke Our Book Store: http://astore.amazon.com/contracross-20