Parachutes and QRSS

Kevin, AA7YQ, has made innovative use of a parachute. You are right Kevin, this must be a first:

Howdy Bill, It’s Kevin here in Montana, the ex-Smokejumper. I’ve been meaning to write again. Thanks for the nice comment on SS #100 I got a kick out of it. Anyhow, just thought I’d drop you a note to let you know I finally had a weekend to design and build up a QRSS beacon. I used a Cypress PSoC CY24123A uC to function as the Crystal Oscillator, and keyer. The final is two paralleled BS-170 MOSFETs running in Class-E mode to give me about 560mW out with a 7.5volt Lantern battery as my supply, total system power efficiency is about 63%(RFout over DC in), I’m sure this could be significantly improved, but good enough for now. After several hours of tweaking the capacitor values I finally got the oscillator to fall into the 100Hz window. That was MUCH harder than I had anticipated. With the original version I switched the PA on and off for true QRSS 3 CW, but found this made a significant frequency drift problem. So I added a couple parts and modified the PSoC code a bit, now its running CWFSK, switching about 1.1pF on and off one leg of the XTAL, shifting the frequency about 10Hz and much more stable.

My first tests were with the board sitting on the bench under the desk lamp. This caused all kinds of drift problems. I then put the beacon in a Tupperware container and placed it inside a soft case cooler. I was looking around the shack for a blanket or something to further improve the insulation, when low and behold sitting in a garbage sack… was a condemned FS-14 parachute (equivalent to the SF-10A) that I was planning using for something useful. So I wrapped the chute around the cooler and stuffed it all back in the garbage sack. Surprisingly, temperature stabilization was achieved, beyond my expectations.

The beacon is running good now, nice and stable. I’m fairly certain, that in the history of mankind, no one has ever used a parachute to improve the temperature drift characteristics of a QRSS beacon. Anyhow, I plan on having it fired up quite a bit, so that my antenna is actually put to some good use. It seems I rarely get a chance for one to one contacts anymore. Most of my free time is spent designing and building the radios I never use. Ha. I guess the design and building is the real fun for me.

Anyhow, I’ll talk to you later. 73s Kevin, AA7YQ

PS the Beacon is sending “AA7YQ” followed by a several second pause. It’s showing up on the K6HX grabber between 10.140050 and 10.140060.

Kevin AA7YQ (Montana Smoke Jumper) Launches his SDR/HDR Build Blog

 

Earlier this month I posted a note from Kevin AA7YQ describing his effort to design and build a nice transceiver that mixes the best of SDR and HDR.   Kevin has launched a blog in which he will describe the project in more detail.  He is looking for constructive feedback and suggestions.  Check it out: 

http://aa7yq.blogspot.com/.

Thanks Kevin. 

An End to the HDR - SDR Conflict? Kevin AA7YQ Combines the Best of Both Worlds

We've had some pretty amazing contact with Kevin AA7YQ over the years.  Kevin and I originally bonded due to our common experience with parachutes  (he was smoke-jumper, I jumped while in the army).  Kevin once used a parachute to insulate a QRSS beacon.   And one day, while thinking about SolderSmoke during a drive through Montana, Kevin turned on his rig only to hear... ME!  He caught one of my infrequent CW contacts. TRGHS.  

Now we hear that OM Kevin may be poised to end the HDR-SDR civil war that has for so long been dividing our great podcast.  Can Kevin's new rig heal our wounds and allow us to enjoy the beauty of SDR waterfalls while not forsaking the joy of hardware defined rigs?   Kevin will soon launch a blog describing his effort at rig-building. See below for a preview.  Stay tuned.  

Kevin wrote: 

I am currently working on a new rig design.  It is a hybrid HDR(Hardware defined)/SDR radio that incorporates some classic superhet design along with some of the more useful features of SDR.  I have found that pure SDR is really not that enjoyable for me.  I love using GNU radio to mock up and test design concepts, but SDR basically dilutes the “magic” of radio to nothing more than software and touchscreens, stuff we use every day all day.  Its not the Ham Radio I grew up with as a kid and was fascinated by.  On the other hand, I have always fought temperature drift, large variable capacitors minimal tuning range, and associated with classic VFO and VXO designs.  In fact, in 1997, for my senior capstone design in EE at Montana State University, I designed a 20m superhet that used a DDS LO.  At the time DDS was cutting edge technology I used an AD7008JP50.  I had to beg and plead with ADI to get a couple samples for my design, since they exceeded my self-funded college student project budget. 😊  But that’s another story.  SDR has made me grow extremely fond of the waterfall display.  I love having the visual “situational awareness”  of what is going on in a moderate bandwidth outside of the spot I am tuned to. I also am a big fan of digital filtering and modification-ability that comes with boot-loadable microcontroller designs.  So this design includes most of the real highlights of SDR but does not take the fun out of designing,  building, and operating a HDR.

Anyhow, this design is a big goal of mine to complete and build in 2021.  I am not retired yet so I still have to balance, work, family, and tinkering time, but I am very excited about this project.  I have “noodled” this design to the point of what I have achieved full-on “analysis paralysis”.  That is, I keep designing and redesigning, optimizing, and figuring to the point where after months of thought, I have nothing to show for it 😊.  So my New Years goal for 2021 is to make “good enough” rather than “perfect” design decisions and move forward.  I will keep you posted on the design and possibly start a blog so I can get some peer review input from the greater RF Design/Homebrew community on my project.  I’ll keep you informed on my progress.

Yellowstone, Smoke-jumpers, and SolderSmoke on 20 CW

Bill,

It has been a long time since I have written to you.  I’m the ex-smokejumper up here in the great winter wonderland known as Montana.  I thought I’d drop a quick note to say howdy and fill you in on the crazy string of events that happened this afternoon.

To refresh your memory…. I stopped jumping fire in ‘09, I have continued to be employed with the US Forest Service as a radio technician.  Part of my duties is to do annual maintenance on all of the Gallatin National Forest VHF handheld radios.  So every winter I update the programming and check the VCOs, RX specs, modulation, and TX power on about 250 handheld radios (luckily the USFS provides me with a handy Aeroflex 3500 service monitor that speeds up this task, but I digress). 

Anyhow I had finished programming and tuning a large batch of radios and today I was making my rounds to deliver them to the various offices.  My route was from Bozeman (where my shop is) to West Yellowstone (where I used to jump out of) … through the North side of Yellowstone Park to Gardiner), then  following the Yellowstone river north up the Paradise Valley (where I grew up as kid) to Livingston (where I live now).  I must say it’s an absolutely beautiful drive that took me to 6 of my delivery points.  This time of year Yellowstone Park is closed to normal traffic, but official Gov’t use is permitted, so you see very few other vehicles, it’s a pretty neat time of year to be in the Park.

Continuing….I stopped at the smokejumper base to deliver their radios and visited with some of the “bros” for a bit then headed on my way.  As I drove off I was thinking of my very last fire jump in Yellowstone and it reminded me that I had written to you back in ’08 about my last jump and listening to “Soldersmoke” while waiting for my ride home.  So today as I drove on through the Park I turned on the old Yaesu FT-747 that I installed in my work truck to accompany me on some of these long drives.  I did not have the mic or key with me, so I was “voiceless”, but I put the 20m stick on my hustler antenna and turned it on anyway.  I enjoy tuning in to some CW while driving and just listening to random QSOs to make use of my drive time by honing my CW skills.  Just after I turned on the radio I heard some a W7 station calling CQ and listened for a while in hopes that it might be W7ZOI, I always am listening for the callsigns of the QRP gurus out there, no luck though it was not Wes.  I continued listening for quite a while.  On the final leg of my trip from Gardiner to Livingston, I was just north of Yankee Jim canyon in Paradise Valley when I heard a very rhythmic CW pattern.  It was almost musical sounding, so I tuned it in good, put the narrow filter on and listened.  It sounded like the OP was using a Vibroplex bug key, due to the long dash patterns, but the way he keyed it was almost like CW R&B..it was a little tough to copy but fun to listen to none the less.  Anyhow as I continued listening, his callsign was KC0MTC in Des Moines, IA and you can guess who he was talking to…none other than yourself, N2CQR!!  I couldn’t believe I had just been thinking about “Soldersmoke”, in fact I had even checked the podcast on my iPhone before leaving West Yellowstone to see if a new podcast was posted yet.   Then a hour or so later, I hear you live on 14.058500 MHz.  What are the chances.  I was frantically thinking of a way to jury rig a cable of some sort to plug into my key jack.  I was hoping you would make another contact so  I could pull over, take a 15min safety break,  rig up a key out of headphone cable or something and give you a call by touching the wires together.  Unfortunately, you disappeared right after the QSO with KC0MTC.  I think you went QRT after that.  I tuned all around the CW portion of 20 searching but no luck. 

Either which way, I got a big kick out of it and thought it was quite a coincidence.  I figured you would appreciate the story.  So here is your signal report into Montana …

You were just above the noise this evening, which is quite high S3-4 due to the engine noise in my mobile. You were readable most of the time but dipping into the noise occasionally.   I heard you tell him you were QRP but missed the power level you were using.  I’d give you an RST of 549, this was about 1730 MDT.  Not bad at all for QRP and 1800 miles or so….KC0MTC was booming in a solid 599.

Anyhow 73’s,

Kevin – AA7YQ

Perseverance gets to Mars with Parachute and Sky Crane

 

Perseverance under parachute canopy

Perseverance hanging from rocket-powered Sky Crane. 

We had another picture of a spacecraft parachuting to Mars: 

It was from the Phoenix lander in 2008: 

https://soldersmoke.blogspot.com/2008/05/parachuting-on-mars.html

The Sky Crane picture is also awesome, but having spent some time under canopy, I am especially fond of the parachute photos. Dino KL0S and Kevin AA7YQ know what I'm talking about.  And Mike WA6ARA used to design and test parachutes for NASA at the Jet Propulsion Laboratory.  

My affinity for parachutes probably predates my jumping.  My Estes rockets usually returned to earth by parachute (sometimes they used the more economical "streamers").  And my grandfather had a little kite contraption that would send a parachute up to a kite where the device  would hit a cork on the line and release the parachute.  He used to attach a dollar bill to the toy parachutist for the kids in the neighborhood.  Decades later, my dad got one of these, and we frequently flew it during beach vacations.  So I like parachutes.   

AIRBORNE! 

SolderSmoke NUMBER 100

http://www.soldersmoke.com

SPECIAL CENTENARY EDITION
A look back to the beginning
Rome Travelogue:  Palatine Hill
Fixing my old freq counter: Trials and Tribulations
Empire of the Air:
  More great history, but more tech faux pas
  "The radio art" 
  An historical precedent for our GONG 
  Lake DeForest? 
  A. Frederick Collins
Understanding Beta Independence 
Understanding Feedback and Distortion
SPRAT 137: Minimalist Radio:
  The FETer/ET-1: "Haiku from Solder"
  Regens: Not for the faint of heart
NEW: THE SolderSmoke STORE: T-shirts, Mugs...!
MAILBAG: 
Shawn N3ZHP new to Knack, wants to build ALL his gear
Steve WB6NTL on hippie origins of "Snort Rosin"
Scott AC0GG recommends new mic, equalizer
Jim AL7RV going QRSS mobile. Can we find him? 
George K8VU on kid busted by FCC
Craig KC2LFI helps with SS s sounds 
David KB1BED says SolderSmoke driving up Drake 2-B prices
Steve G0FUW "Ten DSB rigs built in cloud of aromatic 60/40"
Brian NF0G HBing at -20F  Comet Lulin coming
Tony G4LLW Freq standards, IC extraction, Arc transmitters
Kevin AA7YQ listened to SS while on parachute mission 
Graeme ZL2GDN building for DSB and QRSS
Stu N6TTO has new FSK QRSS beacon 10140060 
Mark K6HX (has great "Brainwagon" blog) lost SSDRA
Robin AF1RE Heard BITx20s on the air, now is building
Gerry EI8DRB has his 2B
Ray M0DHP has a strange aromatic solder experience...

SolderSmoke Podcast #228

Soldersmoke Podcast #228 is available: 

http://soldersmoke.com/soldersmoke228.mp3

Of course, no travel.  But vaccines are here so maybe soon we can leave our shacks.

In the meantime:

I’ve been playing chess against AI bots on chess.com.

Netflix recommendation:  The Bureau.   From France. A review from NPR: 

https://www.npr.org/2020/06/22/881642358/addictively-suspenseful-thriller-series-the-bureau-will-keep-you-on-edge

A reading from "Conquering the Electron."  Germanium vs. Silicon.

Bill’s Bench:

The KLH Model Twenty-one II.  Acoustical Suspension.  First receiver WITH A PILLOW!  Bad speaker? Blown AF amp finals.  Hot heat sink.  VBE Multiplier. Desitin.

Tony Fishpool’s recommended LM386 boards.  10 for 11 bucks.  Nice.  They work.  Pictured in the Amazon ad at the upper right of the SolderSmoke blog page.

Putting a digital display on the Lafayette HA-600A

Test gear trouble.  My Radio Shack multimeter getting flaky.  I many need something better.  Auto ranging? My beloved Maplin AF generator died – will have to fix. I need that thing.  Probably a bad chip.  Good thing they are socketed.

I almost forgot about SKN!  But I remembered and I made one contact with the HT-37 and Drake 2-B.    

Pete’s Bench:

Presentation to RSGB on Homebrew.

TenTek Troubleshoot.

Swan 240?  Looking nice.

SDR adventures.

MAILBAG

Bill N8ET sent me some really nice Showa 9 MHz 8 pole crystal filters. 

Kevin AA7YQ Smoke jumper!  Building a hybrid SDR.HDR rig.  Launched blog. FB

Nick M0NTV working on similar HDR/SDR project.  Great video.

Grayson KJ7UM Hollow State Design – Launched a new blog.  Very FB!

Thomas K4SWL of SWL Post blog.  Kearsarge Mountain Transmission system.  And recent events.

Peter VK2EMU Poetry.  CW poetry.

Pete WB9FLW looking at DSB rigs…

Drew N7DA  Feels not like a real ham because he hasn’t built a quad from bamboo. Which type of landscape bamboo is best for antennas?

Ryan Flowers of MiscDotGeek.Com blog is also watching the Tally Ho YouTube videos of Leo Sampson. Wants to put a WSPR beacon on the Tally Ho. 

Joe KF5OWY  Working with diode ring mixers, trying to see the mixer action on his ‘scope. 1 and -1!

Jim AB9CN sent a cool idea about how to do a 20/17 Moxon.

Roy GM4VKI – I thanked him for his article in SPRAT about putting a 2n3904 on the output of an NE602 10P mod.  Brilliant.

Roger Hayward Told him that I really liked his Dad’s recent web site updates.

Farhan – Jokingly cursed me for showing him the Oscillodyne regen of Hugo Gernsback and Jean Shepherd.  “Now I will have to build this!”