"The New Essential Guide to Electronics in Shenzhen" A Book Review by Jenny List (with a video from Shenzhen)

This new book looks really good.  Great electronics info, with lots of cultural and linguistic wisdom. 

https://hackaday.com/2024/03/13/review-the-new-essential-guide-to-electronics-in-shenzhen/#more-668397 

Jenny's review brought to mind an older SolderSmoke blog post about Shenzhen. In this 2012 video  Bunnie Huang in Singapore talks about getting parts in that city: https://soldersmoke.blogspot.com/2012/08/singapore-knack.html

Thanks to Jenny, Naomi, and Bunnie.  

Jean Shepherd has Trouble with his Heising Modulator (and his date)

This is probably Jean Shepherd's best program about homebrew ham radio.  It is about how we can become obsessed with the problems that arise with equipment that we have built ourselves, and how normal people cannot understand our obsessions.   

I posted about this back in 2008, but I was listening to it again today, and quickly realized that it is worth re-posting.   Realize that Shepherd's Heising modulation problems happened almost 90 years ago.  But the same kind of obsession affect the homebrewers of today.  

Note too how Shepherd talks about "Heising" in Heising modulation.  Heising has an entire circuit named for him, just like Hartley, Colpitts, and Pierce of oscillator fame.  Sometimes, when I tell another ham that my rig is homebrew, I get a kind of snide, snarky, loaded question:  "Well, did you DESIGN it yourself?"  This seems to be a way for appliance operators to deal with the fact that while they never build anything, someone else out there does melt solder.  They seem to think that the fact that you did not design the rig yourself makes your accomplishment less impressive, less threatening.  This week I responded to this question with Shepherd's observation -- I told the enquiring ham that my rig is in fact homebrewed, but that I had not invented the Colpitts oscillator, nor the common emitter amplifier, not the diode ring mixer, nor the low-pass filter.  But yes, the rig is homebrew, as was Shepherd's Heising modulator.    

Guys, stop what you are doing. Put down that soldering iron, or that cold Miller High Life ("the champagne of bottled beer") and click on the link below. You will be transported back to 1965 (and 1934!), and will hear master story-teller Jean Shepherd (K2ORS) describing his teenage case of The Knack. He discusses his efforts to build a Heising modulated transmitter for 160 meters. He had trouble getting it working, and became obsessed with the problem, obsessed to the point that a girl he was dating concluded that there was "something wrong with him" and that his mother "should take him to a doctor."

This one is REALLY good. It takes him a few minutes to get to the radio stuff, but it is worth the wait. More to follow. EXCELSIOR! FLICK LIVES!

Listen here:  

http://ia310115.us.archive.org/2/items/JeanShepherd1965Pt1/1965_01_29_Ham_Radio.mp3

Mr. Carlson's ART-13 Transmitter (with Dynamotor)

Here we have a really cool video from Mr. Carlson.  In it he reveals (admits!) to what we already know:  HE IS A HAM RADIO OPERATOR.  FB Mr. C!

You can see that he is a true ham, with a true case of THE KNACK, when you see his reaction to the inside view of the ART-13.  He seems to gasp as he notes that there is a lot of "RF goodness" in that box.   There is a vacuum relay, a bread-slicer capacitor, there is even a variometer. And lots of good, big THERMATRONS.  Only a true ham, a true Knack victim can recognize this RF goodness. 

The Dynamotor that goes with this transmitter is really interesting to me.  I have been hearing these things whining in the background (audible noise, not a signal defect) on many early morning (Saturday 3885 kHz) of the Old Military Radio Net.  I can often hear the dynamotor of Buzz W3EMD as he transmits from Rhinebeck, New York.   It was great to see the inside of this device.  

Back in 2017, Hack-A-Day took a look at Dynamotors: 

https://hackaday.com/2017/07/04/retrotechtacular-dc-to-dc-conversion-rotary-style/

There are several good ART-13/BC-348 pictures on W3EMD's QRZ page:

 https://www.qrz.com/db/W3EMD   

I was especially taken by the handwritten frequency chart on the front panel of the ART-13.  This reminded me a lot of the handwritten readout that I have been using on various rigs, including (most recently) the 15-10 SSB transceiver. I hope Paul focuses on this paper-and-pencil frequency chart;  it is nice to step away a bit from the glowing numerals of San Jian. 

Mr. C points out that the ART-13 was the transmitter that was paired up with the BC-348 receiver.  He will be working on both in the weeks ahead. 

Thanks Mr. Carlson. 73 OM. 

SolderSmoke Podcast #249 -- Travel, Pete's 6BA6 rig, Books!, VFOs, SDR, Computers, Spectrum Analysers, Transistor Man! MAILBAG

New VFO for 15-10 Transceiver

Schematic below

SolderSmoke Podcast #249 is available:  http://soldersmoke.com/soldersmoke249.mp3

There is also a video version of this podcast: https://youtu.be/5xyaYivtOhw

Travelogue:  

HAPPY VETERANS' DAY TO PETE AND GRAYSON AND TO ALL THE OTHER VETERANS WHO ARE LISTENING. 

Trip out to San Francisco. Sticker placed on the corner of Haight and Ashbury:  See picture below.  Note other sticker.  Really Groovy! 

Cuban Cacharreo! Andy CO2AFV's Knack Story  https://soldersmoke.blogspot.com/2023/10/a-cuban-knack-story-and-pandemic-sits.html

Bill's DXCC-100.  DONE.   

Tribal Wisdom:  W1REX on HRWB https://soldersmoke.blogspot.com/2023/11/listen-to-rex-w1rex-lots-of-tribal.html

Pete's Bench:

Pete's 6BA6 rig

Pete's 6BA6 Rig

Pete Re-invents the Shirt-pocket SSB Rig

Pete's remake of the ShirtSleeve Transceiver

Pete Builds Two Computers 

Pete Adds a Second Band to his Homebrew SDR 

 

SHAMELESS COMMERCE DIVISION:  

BEZOS BUCKS ARE BACK!  PLEASE  BUY THERE! >>>>>>>>>>>>>>>>>>>>>>>

Mostly DIY RF:  Work proceeds in the Oregon Silicon Forest on P3ST kit development. Todd is confident the P3ST will be released on December 18th.Many other kits available now:  https://mostlydiyrf.com/ 

Sign up for the newsletter:  https://mostlydiyrf.com/subscribe/ 

Bill's Bench: 

Rebuild of the 15-10 VFO (for improved Dial Spread) (with yet another QF-1 capacitor) https://soldersmoke.blogspot.com/2023/10/dial-scale-linearity-spreading-out.html

Why Building for 10 meters is harder: https://soldersmoke.blogspot.com/2023/09/why-building-for-10-meters-is-harder.html

Copper Tape shielding of 15-10 rig. 

Crushing Spurs with Better Bandpass Filters (see blog post) https://soldersmoke.blogspot.com/2023/09/crushing-17-and-12-meter-spurs-with.html

Another 15-10 rig in the works... for SSSS.   Boards are accumulating... 

More problems discovered with the Herring Aid 5 Receiver . Lots of SS blog posts  Comment from Rick WD5L.  ) https://soldersmoke.blogspot.com/2023/10/a-big-error-discovered-in-1976-qst.html   Did you try to build one?  Did you succeed or did you fail?  Please let us know. 

The Basil Mahon books (blog posts) https://soldersmoke.blogspot.com/2023/11/basil-mahon-is-author-for-us-he.html

The Sunburst and Luminary book of Don Eyles (blog posts) 

The Art of Electronics by Horowitz and Hill (blog posts) 

Spectrum Analysers:  Tiny SA Ultra https://soldersmoke.blogspot.com/2023/09/the-tinysa-ultra-spectrum-analyser-video.html  and Polarad 632C-1; George WB5OYP gave me one of these spectrum analysers  (I NEED a manual! Does anyone have a manual or a schematic? )  : 

Polarad 632C-1

Stabilizing the EB63A (with Pete recommended LP filters from e-Bay. 

MAILBAG:

TRANSISTOR MAN T-SHIRTS!  Thanks to Roy WN3F! 

Todd VE7BPO on AF amplifiers.  Thanks Todd.  

Wes W7ZOI -- Always a privilege to exchange e-mail with Wes. 

E-mail from Jay Rusgrove W1VD. About the Herring Aid 5. 

E-mail from Eamon Skelton EI9GQ!  Amazing! 

HB2HB with Denny VU2DGR https://soldersmoke.blogspot.com/2023/09/hb2hb-contact-with-denny-vu2dgr.html

Nick M0NTV on diode matching for ring mixers: https://soldersmoke.blogspot.com/2023/10/does-matching-matter-diode-matching-for.html

Paul Taylor VK3HN on the new Elecraft CW rig. 

Dean KK4DAS fixed the noise in his Hallicrafters SW receiver.  A long battle, finally won. 

Dean also in contact with G3UUR. 

Ramakrishnan VU2JXN helping me set up a backup of blog on WordPress.  

Mark KA9OOI noticed that SS podcast archive appears gone.  In fact just temporarily relocated to http://soldersmoke.com/podcastarchive.html

(SS PODCAST Archive temporarily relocated to http://soldersmoke.com/podcastarchive.html) 

Andreas DL1AJG - Crystal radio video. https://soldersmoke.blogspot.com/2023/10/building-crystal-set-videos.html

George N2APB on the Herring Aid 5

Grayson KJ7UM experimenting with Varactors and Thermatrons! 

Thomas K4SWL on Mattia's DC receiver. https://soldersmoke.blogspot.com/2023/10/mattia-zamanas-amazing-direct.html

Bob Weaver of Dial Bandspread Linearity  fame.  Electron Bunker

Mike Bryce WB8VGE QRP Hall of famer -- he too couldn't get the Herring Aid 5 working. 

Kirk NT0Z wrote about the Wayback machine.  But this former ARRL staffer he also tried and failed to get the Herring Aid 5 going.  Way back when... https://soldersmoke.blogspot.com/2015/03/kirks-herring-aid-tuna-tin-and-regen.html

New 15-10 VFO with schematic

Dial Bandspread (Before)

At corner of Haight and Ashbury

Listen to Rex. W1REX. Lots of Tribal Wisdom in this Ham Radio Workbench Interview

 

https://workbench.libsyn.com/hrwb-193-building-projects-with-rex-harper-w1rex

This week's Ham Radio Workbench podcast features an interview with Homebrew Hero Rex Harper, W1REX of QRPMe fame. (The bulk of Rex's portion starts at about 1:26:30.)

I really liked this talk with Rex.  His enthusiasm for homebrewing is really inspiring -- it is very reassuring to know that there are others like us. Rex clearly has The Knack.  

I got a kick out of Rex's story about the outhouse at Dayton.  FB OM.  

Here is the video of the mojo transfer ceremony in which shared some of the Tuna Tin 2's mojo with my BITX 17.  Thanks again Rex!  

And thanks to George and the gang out at Ham Radio Workbench. 

A Cuban Knack Story, and a Pandemic (SITS!) SSB version of the DSB Jaguey Rig -- Viva el Cacharreo!

 

First, the Knack Story.  Andy CO2AFV clearly has The Dilbert Disease: 

Hello my name is Andy. I had an interest in Ham radio before knowing that existed.  While I was a child my entertainment was building quartz oscillators that later I tried to receive on neighbors' and friends' radios. One day I succeeded in modulating two of them and I finally established a conversation with a friend about 200 meters from my home!!!

Andy with his FB HB rig

Here's a description of a version of the 7 MHz Jaguey transceiver that Andy built during the pandemic.  It looks to me as if he took the Jaguey DSB rig and added a 455 kHz filter with an additional mixer to turn it into an SSB rig.  So he is generating the SSB at 455 kHz, and mixing it with a VFO running at around 6.8 MHz.  The sum output would put you in the 40 meter band; the difference output at around 6.35 MHz could (mostly) be knocked down by a bandpass filter.  I think the Cuban Radio Federation Web Site gets it a bit wrong -- the purpose of the filter is probably to eliminate the unneeded sideband, not really to suppress parasitics. 

Federation of Radio Amateurs of Cuba Published: September 17, 2020 Viewed: 2352 Comments: 12 

Radio Transceiver CO9BIA 455 A construction carried out in times of Pandemic by its author, Andy Fernández Valdespino (CO2AFV). 

Cuban radio amateurs continue to accept the challenge of isolation caused by the incidence of COVID-19, but this does not mean they paralyze their activities. Such is the case of Andy Fernández Valdespino (CO2AFV), who for more than four months has been working on the development and construction of a new transceiver, the CO9BIA 455, a device that already works perfectly in the 7 MHZ Band. 

Andy, who is technical secretary of one of the Havana Radio Clubs, has to his credit the construction of two Jagüey-type radio models, as well as several types of interfaces for programming and Digital Modes; and various prototypes of antennas, among other elements that make up its constant “cacharreo” activities, as we say in our language. 

He has now completed and tested a new model that he has named with the callsign of his Radio Club, CO9BIA, and the model 455 is due to the use in this prototype of a filter of the same capacity. Asked about the details and other construction bases of this radio, whose transmission and reception tests using only outputs from the driver were carried out on September 14, Fernández Valdespino pointed out that his objective was to build a portable QRP equipment, of very large proportions. small, that it would be capable of being operated in the 40 meter band on both sides, by incorporating an improved VFO from the traditional Jagüey, but this with some modifications, and that the radio in question would work powered by a 7-inch battery. .2 volt, the same ones that come with most of the “Handy” used by radio amateurs. 

To complete the “portability” characteristics of the new radio, the possibility of exchanging antennas has been incorporated, and a very light variant of the telescopic type can also be used, just over one and a half meters long. Andy explained that for the development of the new equipment, he was based on studies that he has been doing on some of the characteristics of the Jagüey, a direct conversion radio with very good sensitivity, but that does not have good selectivity, so in the conditions of the current solar cycle, its behavior is not optimal. In Jagüey, the signals, after being modulated, do not pass through any band-pass filter, which causes many “spurious” signals to be released into the ether, which represents an obstacle to be solved in order to incorporate a linear that can increase its output power. All of this, the creator assures, was taken into account for the construction of this new design. For example, in the transmission step, in the CO9BIA 455, the microphone signal is mixed, pre-amplified, filtered and re-amplified, until it is delivered to the 455 kHz filter, to finally be mixed with the VFO signal; and as a result of these steps, the sum and subtraction of these mixtures is obtained, which are in the order of 6 and 7 MHz. As a final result, after these signals are injected into the input bandpass filter, only one output is obtained of 7 MHz, whose operating segments are carried out through the use of the improved VFO. Given these characteristics, with which spurious signal outputs are reduced or eliminated, in this new radio it is feasible to add a linear that can raise the power to approximately 7 watts, which would adjust to the power conditions described above.

This experienced “clunker” says that for the development and construction of this transceiver, three fundamental aspects were combined: the first, applying the experiences of having built other radio models, to ensure that the new prototype could be built by any radio amateur. with minimal knowledge of electronics, using recycled components and materials. Secondly, he used and adapted parts of the construction schemes of a radio project called LU3DY, from the Argentine Radio Club “Almirante Brown”; and finally, the adaptation of some parts of the traditional Jagüey, such as the VFO board and circuit. Although, as already explained, the radio works, 

Andy Fernández is immersed in the construction of a small linear amplifier similar to the ARARIHNA project, by a Brazilian radio amateur, as well as making final adjustments to what is already a reality: the conclusion and final adjustments of the new CO9BIA 455 Transceiver, a portable QRP device for the 40 meter Band, developed in these times when we must all stay at home, to protect ourselves from COVID-19. 

By Luis Enrique Estrada Hernández (CO2BK) FRC Information System Coordinator 

Circuit details.  

The VFO Board

Here is the web site of the Federation of Cuban Radio Amateurs that describes Andy's work: 

https://www.frcuba.cu/filiales-grupos/la-habana/radio-transceptor-co9bia-455.html?fbclid=IwAR1DptfJdfAS5PSBbyMMUd6zjHo2EA3SHo7hhD1hUPRdtYVF29mKPD8dgPE

And I learned a very useful Spanish word through this:  "Cacharreo" is a Spanish word that means to tinker with something in an attempt to fix, mend, or improve it. 

Thanks Andy!  And thanks to  Trevor for alerting me to this great project.  

"The Art of Electronics" by Horowitz and Hill (First in a Series of Blog Posts on this Great Book)

Paul Horowitz

Oh man, this book is so good.  You really just need to buy it now.  I put it in the Amazon link to the right.

OVER HERE >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>

The Imsai guy reminded me of this book, and pointed out that earlier editions are more reasonably priced, so I got the second edition (looks like 1980, reprinted many times through 1988).   Dean KK4DAS got one too (I think he also got the second edition).   

Lest there be any doubt that this book is for us, first let me point to the pictures of Paul Horowitz and Winfield Hill.  https://artofelectronics.net/about/

Winfield Hill 

Just from the pictures, you can tell that these guys have THE KNACK.  And -- get this -- THEY ARE BOTH PROFESSORS AT HARVARD.  Wow. 

Their web page explains where the book came from: 

Dean KK4DAS and I have already started sharing quotes from the book: 

Referring to other books, H and H  write:  "Much of the favorite pedagogy of beginning textbooks is quite unnecessary, and, in fact, is not used by practicing engineers, while useful circuitry and analysis lies hidden in application notes, engineering journals, and hard-to-get data books." 

"Thus, the treatment of this book reflect our philosophy that electronics, as currently practiced, is basically a simple art, a combination of some basic laws, rules of thumb, and a large bag of tricks. For these reasons we have omitted entirely the usual discussion of solid state physics,  the h-parameter model of transistors, and complicated network theory, and reduced to the bare minimum the mention of load lines and the s-plane.  The treatment is largely non-mathematical, with strong encouragement of circuit brainstorming, with mental (or, at most, back-of-the-envelope) calculation of circuit values and performance." 

Stay tuned.  There is a lot more coming about this wonderful book. 

Valveman -- The Story of Gerald Wells

Don't be deterred by the annoying test patterns at the start of this video.  Just skip past them.  The rest of the video is quite good.  Or you could just click on this link and avoid the first 83 seconds of test pattern:  https://youtu.be/Y8w6iwaAGJ4?t=83

Gerald Wells has been mentioned on this blog before, but I don't think we've ever presented the full documentary on this fellow.  Here it is.  Gerry is clearly one of us: a radio fiend, obsessed (as he admitted!) with wireless, a victim of THE KNACK.   

George WB5OYP of the Vienna Wireless Society got to meet Gerald Wells and visit his museum. George alerted me to this video.  Tony G4WIF also was able to visit Gerry and his museum. 

The documentary is full of interesting stuff, and is, in itself, a Knack Story.  Wells mentions the Crippens murder so well described by Eric Larson in "Thunderstruck."  It was this crime that brought radio to the center of public attention.  

Dilbert Knack Video: Who was the "Doctor"?

I was looking at this again and I realized that there was more to it than I thought.  Who was the "doctor" who was filling in for their regular doctor?  

SolderSmoke Podcast #240 NIMCELS? Hex DX, CBLA RX, PTO? Solid State HT-37? Exotic caps, Benches, SBE-33, TenTec 540, KWM-1 MAILBAG

 

SolderSmoke #240 

Monday September 19, 2022

http://soldersmoke.com/soldersmoke240.mp3

Sorry, I had some technical difficulties so my audio is a bit distorted. 

NIMCELS?  Niche Internet Micro Celebrities. I dunno....  Can our listeners come up with an acronym that describes our place in the universe?  

Sponsors:  Parts Candy.  Carlos in Chicago.  Great leads.  Don't scrimp with a crimp!  You need some good quality test leads on your workbench.   Get yours from Carlos.  Click on the picture on the blog page or go to PartsCandy on e-bay.  

"Techno Wizardry"?   Our lawyers at Dewey Cheatham and Howe will be after them for that!  

Bill's Bench: 

Hex Beam has made me a DXer.  91 countries. Having fun. Mozambique (Long path), San Andres island, and Saudi Arabia, all on Friday. All homebrew SSB 100 watts. 

Put my old 20 meter CW station back on the air:  Barebones superhet and the VXO 6 watter.   WYKSYCDS. This may be one of very few CBLA Receivers in the world!

Been getting active in the Vienna Wireless Society.  Dean KK4DAS is President and a lot is happening in the Club.  Makers group. Lunch with the group on Tuesdays.  Lots of fun.

We are looking at Farhan’s Daylight Again Analog rig.  Using parts from Dean’s 3D printer, we have made PTOs. See blog post for picture.   (But are they really PTOs? Or just Variable Inductors?) 

VFO madness.  Solid stating an HT-37 VFO. Grayson: “You have clearly lost your mind.” Perhaps.  100 MHz FM broadcast RFI. This brought me to capacitors and linear tuning:

SLC, SLW, SLF and Midline/Centerline caps.  Do special caps explain why some VFOs have linear tuning while others do not?  NO, not really.  You can get linear tuning with ordinary caps.  See blog post

Working on the bench.  Reading Adam Savage’s book on workshops and tools. (link to the book in the right hand column of the blog.   Some other workbench links on the blog.  Upgrading tools and test gear.  I have a proper bench power supply. Better side cutters.  Engineering rulers.  Digital calipers. Better solder (I was talking to Ron WA6YOU – a real solder authority - about this.  Kester 60/40 ).

SHAMELESS COMMERCE DIVISION: 

mostlydiyrf.com

Currently offering seven items:

·  UDVBM-1 (in three versions)

·  PG-TIA Broadband IF Amplifier

·  TIA-AGC IF Amplifier

·  Dual-Gate MOSFETs

·  OA741D Op-Amp (discrete components)

·  8-Pole QER Crystal Filter

·  I2C Rotary Encoder

Three more are shown as coming soon:

·  GP Audio Amp (general-purpose audio amp)

·  HyCas IF Amplifier with AGC

·  M-Cubed (Michigan Mighty Mite kit)

·         Mostly DIY RF offers hardware for hardware-defined radio. That's not a comment on software-defined radio. SDR is cool and useful, and it has its place.

·         In fact, I believe in explicitly making use of technology from all eras (vacuum tubes, discrete semiconductors, and integrated circuits

·         What does "mostly" DIY mean? It means making what you want and using ready-made for the rest. Even the most fanatic DIY'ing home brewer does this without much thought. He uses components he didn't fabricate, electricity he didn't generate, and theoretical knowledge he didn't discover. One can't fight all battles, one has to choose which to fight and which to leave to others. If an appliance-operating Ham doesn't want to fight at all, that's okay, but Mostly DIY RF has nothing to offer him.

--------------

I need YouTube viewing hours.  So I am putting some of the best SolderSmoke podcasts up on the YouTube channel.  Please listen/watch on YouTube. Here is the playlist:  https://www.youtube.com/playlist?list=PLv9MEKq1quk-gnxog7eBqY_y7cpQadf6T   

Google feed no longer sending our e-mails.  So please follow the blog, Get yourself a blog feed reader.  I use Feedly.  It is free.   Download, search in Feedly for SolderSmoke, hit subscribe and you are done. https://feedly.com/i/discover Follow Pete’s blog too!  It is easy.

 Pete’s Bench

Resurrections: 

SBE-33!

TenTEC Model 540

KWM-1

Mailbag:

Dan KC5VPI getting into homebrewing. No longer WRONG!

Michael AG5VG built subharmonic DC receiver, put it on 40 and 20.  FB.

Mike AA9IL working on old tube stuff including a DX-100 AMD UUHF gear up to 122GHz.

Ed WA4MZS liked the SolderSmoke book. USCG vet.  As is Mike Rainey AA1TJ Semper Paratus!

Clint KA7OEI – The Music of the Beams – My Hex  does not sing!  So far!

Walter KA4KXX – The Knack started early.  Video of getting a toolbox for Christmas. And working on PTOs!  He likes them!

Phillip G4HOJ Also working with subharmonic mixers – using the more complex 4 diode version.

Peter GW4ZUA Built an amazing rig from RADCOM (1980s) Cool VFO with varactor fine tuning and a coil with a dust core that was cut in half to minimize temp effect. Box now holds 3  band version of Pete’s SimpleCeiver. FB.

Bruce KC1FSZ building 25 Watt amp for his Peppermint Bark rigs.  We won’t turn him in to the QRP authorities.

Grayson KJ7UM tested the 12BY7A from my DX-100 VFO.  It was in fact weak. Thanks Grayson.

Charles Smith KV4JT has some really interesting stuff on how to solid state tube gear.   Especially R-390s. https://soldersmoke.blogspot.com/2022/08/trigger-warning-solid-stating-old-tube.html

Gianfranco I0ZY Old friend from Rome.  Amplifier manufacturer.  FB.

Paul WA1MAC getting started again after long hiatus.

Vasily.. I mean Todd VE7BPO.  Always great tech info.  Thanks.

Mark WB8YMV building a superhet with a 455 kc IF.

I sent Farhan some comments on his Daylight Again video: He wrote back “I marvel at their stamina to watch an hour long video of a man talking with a funny accent!”  

SolderSmoke FDIM Interview with Farhan VU2ESE -- The sBITX is Coming!

Bob Crane W8SX --  our correspondent in Dayton/Xenia --  once again collected interview with FDIM presenters. Thanks Bob!  Here is his talk with our friend Farhan:  

http://soldersmoke.com/2022 VU2ESE.mp3

Here is a great post on the sBITX (May 30, 2022) from Farhan's web site: 

https://www.vu2ese.com/index.php/category/uncategorized/

Here is Farhan's amazing presentation on the sBITX at the 2021 FDIM: 

https://soldersmoke.blogspot.com/2021/11/farhans-amazing-knack-story-from.html

"Hobby High" from the Lamarkaan Radio Club and The Hindu magazine

 

https://www.thehindu.com/opinion/open-page/hobby-high/article65375392.ece?fbclid=IwAR01JGwweZuJEH1Pg15rREybZqfqKUjU3ZLbGn-xhOYZVlFPs7yN_FbJoX4

This is a really nice look at hobbies and their role in life. It is very relevant to discussions of The Knack. 

Many of the quotes resonate with me, especially those about how hobbies -- in our case ham radio -- provide an important source of enthusiasm.  I remember an old timer in Rome telling me that at age 85, he jumped out of bed each morning, heading to the radio shack with enthusiasm. 

I'd add that ham radio adds elements of permanence and continuity in our lives. For many of us, we've been working on radios since our early teens.  I have in my shack gear that I've had for almost 50 years! Amidst the vicissitudes of life, it is really nice to have things with this kind of permanence. 

Thanks to Atanu Dasgupta of the Lamakaan Amateur Radio Club of Hyderabad for alerting me to this article.  OM Atanu wrote: 

My friends, acquaintances and members from my extended family often ask me how I spend my time and keep myself busy throughout the day. When I say I pursue a hobby called Amateur Radio (Ham Radio) and I spend more than 8-10 hours in a day for that purpose, I don’t find many takers. Many of them feel that I must be earning handsomely by devoting my energy and time as seriously as pursuing a regular work-from-home regime for some corporate entity. Sometimes even my domestic help express doubts, albeit in a decent manner, about my devotion to something in life without any financial gain and expect a wage-hike for them against my ‘extra earning’. After all how can a hobby (pastime) can keep someone so engrossed physically, mentally - on the computer, over thick books/ magazines , on the work table at the radio shack, on the floor for some odd metal works, on the rooftop with antennas, over the Radio-on-air, over phone etc - without some pecuniary benefits? Recently a brilliant essay by Himani Datar on ‘hobby’ in the Hindu Magazine (https://www.thehindu.com/.../hobby-high/article65375392.ece ) has been very impressive and appears to be a savior to all concerned like me. The essay brings out all in favour of all hobbies and hobbyists and I feel more confident now about my course of engagement on a long-term basis.   

Atanu's Shack

500 WYKSYCDS IBEW Stickers Arrive in Europe! Order yours today! Free!

Lex PH2LB in the Netherlands has gone the extra kilometer for the IBEW.  When he saw the stickers that had been placed in New York City, he asked for the design.  I sent him the files that  Jesse N5JHH (designer of the stickers) had sent to me.  Very quickly, Lex had 500 of these stickers printed up and ready to go (see above).  His shack now serves as a veritable beachhead in Europe for the IBEW and the CBLA.  Thank you Les!   

Les has even set up an on-line order form for those who seek to assist in the noble campaign to spread the word about our cause: 

https://ph2lb.nl/webshop/sticker.php

Les is making the stickers available for free -- all you need to do is pay the postage. 

Please be sure to send us pictures of the stickers after they have been placed. 

And let's not forget that the quote on the sticker is from Pete Juliano, N6QW. 

Here is one that recently showed up in Blacksburg, Virginia (zoom in on the green utility box): 

And here is Lex's very interesting site, with his Knack Story:  https://www.ph2lb.nl/blog/index.php?page=history

Back to the 1970's! Homebrew Keyboards! Don Lancaster's TV Typewriter

Even though it is outside my normal analog comfort zone, I really liked this video.  Farhan sent it to me, along with this note: 

--------------

As a kid, do you remember Don Lancaster's books? I learnt most of my digital electronics from him. I still have the 7 dollar video generator book on my shelf. He predates the Homebrew Computer Club. In fact, he is probably the reason for the HCC, because he put in the pieces that were used by others like the two Steves to build their own computers.

His most brilliant hack was to build a "TV typewriter" out of standard TTL parts that were just coming out in the surplus market. For $120, you could, if you build etched your own PCBs and managed to pry parts of fellow builder's dead fingers, build a circuit that, if you typed your name, it showed up on the TV screen! Never mind that dad wanted to get back to watching football or mom wanted the kitchen counter to be cleared out. Those days, parents had no appreciation for their kids being on TV, I guess.

In an earlier hack, he encouraged people through his articles in Radio Electronics to build their own Qwerty keyboard. With this in hand, you could, um .. um... well type something and sit back. There was nothing to connect it to. The fun thing was, there were no key switches available. You had to build those as well. Wind your own springs, make your own keytops, Once it was built, you could use a VOM to check that the ASCII bits corresponding to the key you held down would correctly show up on the 7 data lines. I guess the girls were surely impressed. You just needed to carry the power supply with +5, -5v, +12v, the keyboard itself, an ASCII chart and a VOM to school to show off.

Jokes apart, he kept building things and builds them to this day. His TTL cookbook and CMOS cookbooks were the goto books for almost all digital elecctronics hackers. It is a pity that no one acknowledges his knack. He has scanned in a few of his books on his 1990s www.tinaja.com.  Check  https://www.tinaja.com/ebooks/cmoscb.pdf

Why does it concern us? He is K3BYG, that's why.

Watch this https://www.youtube.com/watch?v=b-bFV8fHekk

- f

-----------

 So many things from the video resonated with me: 

-- The importance of building and testing, stage by stage.  The narrator admits "I might have screwed that up."

-- Homebrew keyboards!  Make your own keyboard springs you pathetic appliance operators! 

-- Wood box. 

-- Origins of ASCI

-- The scary 1970s.  Indeed.   I started High School in 1972. 

-- Schematic errors!   Oh the humanity!  Erratas. 

-- Appeals to the Digital Gods. (Not as powerful as The Radio Gods.)

-- A Gimmick Twin Lead. 

-- "So many different disciplines went into building this thing..." 

-- A taste of the home computing revolution of the 1970s. 

-- Farhan is right -- he was K3BYG.  But that call now seems to belong to someone else. 

Don Lancaster's unofficial autobiography: 

https://www.tinaja.com/glib/waywere.pdf

Clearly, Don Lancaster has The Knack! 

A Thermatron (and Asperger's) Knack Story

Heroic stuff.  In more ways than one.  FB Mark.  

 https://www.aane.org/over-and-out/

Bill Talking about Homebrew Radio with L’Anse Creuse Amateur Radio Club (Michigan) -- February 2, 2022 (Video)

This was a very nice meeting.  We just talked homebrewing and why it is such an important part of ham radio.  Video above

Topics included:

-- Jean Shepherd

-- Being "Electrically Inclined" 

-- The Herring Aid 5

-- Radio Clubs around the world

-- The Shame Shelf

-- Making mistakes, releasing smoke

-- Errors in ham radio magazines and schematics

-- The importance of understanding the circuit

-- The Michigan Mighty Mite

-- Building a power supply for the HW-32A

-- The origins of the SolderSmoke podcast

-- Knack stories, the IBEW and what we all have in common

-- The importance of books

Thanks to The L'Anse Creuse ARC for the invitation. 

Early Radio in New Zealand, and "The Knack"

 

Thanks to Thomas K4SWL of the SWLing Post for alerting us to this gem.  Listen to Sarah Johnston's program describing the origins and early years of broadcast radio in New Zealand. 

https://www.rnz.co.nz/national/programmes/smart_talk/audio/2018821216/voices-in-the-air-sarah-johnston-on-100-years-of-radio

This wonderful recording and article reminded me of a bit of ham radio history involving New Zealand,  and someone who was involved who had a surname similar to mine.  The ARRL book "200 Meters and Down" by Clinton DeSoto reports on page 91 that on May 22, 1924, radio amateurs for the first time made a contact between New Zealand and South America.  Carlos Braggio operated rCB8 in Buenos Aires.  In New Zealand, J.H. O'Meara was at the key in Gisborne. 

Writing of the early amateurs,  DeSoto wrote (on page 92): 

 "Why did they do it?  None but one of them can know, and only he would know the feeling of driving ambition, the relentless call of work to be done, the gnawing discontent that hungers for accomplishment; it would be hard to put into words. The strange thing is that there were folk, everywhere on earth it seemed, who had that urge." 

"The gnawing discontent..."  That is what Jean Shepherd had when he couldn't get his Heising Modulator to work properly.  We've all been there. 

The last line in the quote from DeSoto's book speaks to one of the major themes of this blog and of the SolderSmoke podcast:  the way in which people all around the world got interested in radio in much the same way.  So many of us, all around the world,  often at age 13 or 14, suddenly got interested in radio.  We all had (and have!) "The Knack."  This is really very nice -- it is something that we have in common, something that pulls us together. 

"First Wireless" 1922 book by Allen Chapman with Foreword by Jack Binns (free download)

 

The cover caught my eye.  Thanks to the K9YA Telegraph for posting it.  I think it captures the allure of radio that most of us felt when we were kids of this age.  

Fortunately this 1922 book is available for free download: 

https://www.fulltextarchive.com/pdfs/The-Radio-Boys-First-Wireless.pdf

It is all about radiotelephone.  They are phone guys.  Just like us.  

And they were homebrewers.  They had The Knack. From Chapter II: 

Another thing that drew the boys together was their keen interest in anything pertaining to science. Each had marked mechanical ability, and would at any time rather put a contrivance together by their own efforts than to have it bought for them ready made. It was this quality that had made them enthusiastic regarding the wonders of the wireless telephone.

And they correctly viewed wireless telephony as being similar to Aladin's lamp.   I remember writing that my homebrew DSB transceiver was like Aladin's magic carpet, carrying my voice from the Azores to friends around the world.  From Chapter III: 

They had already heard and read enough of the wireless telephone to realize that it was one of the greatest marvels of modern times. It seemed almost like something magical, something which, like the lamp of Aladdin, could summon genii who would be obedient to the call.

This is a reminder of how young the radio art is.  This book came out just three years before my father was born. Many of us have in our shacks working rigs that are half as old as radio itself.