Podcasting since 2005! Listen to Latest SolderSmoke

Saturday, February 7, 2009

AA1TJ and AA1MY MAKE QRP HISTORY

I was feeling smug about my version of the ET-1/FETer single FET transceiver. I built the transmit portion of the rig this morning, and it fired right up, producing a nice clean CW signal. But then news came in of the historic 100 mile QSO between Michael, AA1TJ, and Seab, AA1MY. Michael was using his new Mikums rig, an 80 meter transceiver built around one tunnel diode. My FET rig seems like a QRO appliance in comparison to the Mikums. Michael's diode rig was putting out 160 micro watts. Yes, 160 uW. Congratulations to Mike and Seab. I'm sure Mike would not mind my sharing his e-mail on this subject (see below). Reading it, you can just feel the excitement that came from this historic contact. I'm sure tunnel diode inventor Leo Esaki (pictured above) would be pleased.
Be sure to check out Michael's description of the rig:
http://mjrainey.googlepages.com/mikums
Also, don't miss the pages on Reginald Fessenden:
http://www.newsm.org/Wireless/Fessenden/Fessenden.html

Friends,
Seab, AA1MY sent me a message just over an hour ago saying that he suddenly began hearing my Mikums transceiver running as a beacon! Seab lives in Bethel, Maine, an air distance of exactly 100miles/160km from my QTH. A few hours earlier I'd measured Mikums' output power at 169uW (yes, microWatts!).
I was at the computer when his message appeared so I quickly called him on the telephone. He said that he'd been monitoring while he was busy with some paperwork. He'd just returned from fetching a load of firewood and all of a sudden there I was! He put the phone near his loudspeaker and I just about fell over! I was weak, but perfectly readable.
Then I practically hung-up on the poor fellow in order to race down to my shack in order to try for a QSO. I heard him clear as a bell at a power of 40w (I reported 459, but I ought to have sent 559). He confirmed my report and then dropped down to 4w. Although weak, I easily copied his 429 report to me. I gave him a 219, which he confirmed.
Oh boy...it's done. We made a skywave QSO using a one-tunnel diode transceiver. I'm practically giddy here :o)
Many thanks to Jim, W1PID, who has patiently listened for several days. In fact, Jim has copied my CQ and callsign several times before my signal evaporated on a breeze of QSB. In return, I copied Jim's Small Wonders Labs DSW at 2w on Mikums with no problem the other day. Again, many thanks, OM. The next time we meet, I'm buying, okay?
Again, way to go Seab; that's one small step for man....naw, more like one more exciting and thoughly useless (ain't it great!) milestone in the history of QRP :o)
73/72's all around,
Mike, AA1TJ

Thursday, February 5, 2009

St. Elmo's Fire and Lightning Brushes

I guess I am and AMer at heart. As a kid I used to listen to the AM QSOs on 75 meters in the Northeast. I still occasionally take a look at the AM Window website and follow the chatter from afar. This is another corner of the hobby where guys still melt solder and study schematics.

One of the many interesting things found via the AM Window is an on-line archive of the AM Press/Exchange newsletter. There are some very good articles in there. Issue #114 has a good one by George, W2WLR. It's about lightning and ways to prevent strikes. What I like about the article is the very practical, hands-on approach. George describes how one intrepid enthusiast put an amp meter between a radio tower and ground and watched the currents generated by a nearby storm (don't try this at home!). The article discusses how brushes on the ends of lightning rods help bleed off charge. You can see some charge bleeding off the masts of the ship depicted above.

After reading his article, I went to work. In an idle moment, I looked out the window across Rome's Via Veneto and saw on one of the hotels some lightning rods tipped not quite with brushes, but with multiple spikes. Go St. Elmo!

Wednesday, February 4, 2009

Humber College Homebrew Space Station Contact? Not really

I wasn't going to mention this, but since we were talking about Grote Reber, I sort of feel obliged to raise this subject. The techno-blogosphere is filled this morning with the story of four Humber College (Toronto) seniors who supposedly contacted the International Space Station with homebrew gear. See: http://www.humber.ca/stories/first_contact.htm Wow, pretty good, eh? Well, not so fast SolderSmoke fans. Turns out you have to read the fine print. They did it with a radio system that they "designed and built themselves." I looked at the slide show and their operating table was covered with expensive commercial gear. Sure enough, when I checked their blog, I found this:

Today, Mr. Rector, Paul, and I went out to
Radioworld and purchased a transceiver. After much research, we decided to go with the ICOM Ic-V8000. For the cost, it has exactly what we need. On Friday, we're going to be integrating it into our setup, and doing all the necessary testing.

This contact was no big deal really. When I was talking to Norm Thagard on MIR station back in the 20th century, there was one 13 year-old kid in South Africa who pulled off the same feat.
See: http://www.gadgeteer.us/MIR18.HTM If they had actually built the radios themselves it would have been a bit more noteworthy. Looks like this one had more PR smoke than solder smoke.

Tuesday, February 3, 2009

RADIO PIONEER: GROTE REBER

Grote Reber has always been a hero of mine. Above you can see the dish that he built in his backyard to conduct radio astronomy in the 1930's.
Read more about OM Grote here: http://www.nrao.edu/whatisra/hist_reber.shtml

Sunday, February 1, 2009

SolderSmoke NUMBER 100

http://www.soldersmoke.com

SPECIAL CENTENARY EDITION
A look back to the beginning
Rome Travelogue: Palatine Hill
Fixing my old freq counter: Trials and Tribulations
Empire of the Air:
More great history, but more tech faux pas
"The radio art"
An historical precedent for our GONG
Lake DeForest?
A. Frederick Collins
Understanding Beta Independence
Understanding Feedback and Distortion
SPRAT 137: Minimalist Radio:
The FETer/ET-1: "Haiku from Solder"
Regens: Not for the faint of heart
NEW: THE SolderSmoke STORE: T-shirts, Mugs...!
MAILBAG:
Shawn N3ZHP new to Knack, wants to build ALL his gear
Steve WB6NTL on hippie origins of "Snort Rosin"
Scott AC0GG recommends new mic, equalizer
Jim AL7RV going QRSS mobile. Can we find him?
George K8VU on kid busted by FCC
Craig KC2LFI helps with SS s sounds
David KB1BED says SolderSmoke driving up Drake 2-B prices
Steve G0FUW "Ten DSB rigs built in cloud of aromatic 60/40"
Brian NF0G HBing at -20F Comet Lulin coming
Tony G4LLW Freq standards, IC extraction, Arc transmitters
Kevin AA7YQ listened to SS while on parachute mission
Graeme ZL2GDN building for DSB and QRSS
Stu N6TTO has new FSK QRSS beacon 10140060
Mark K6HX (has great "Brainwagon" blog) lost SSDRA
Robin AF1RE Heard BITx20s on the air, now is building
Gerry EI8DRB has his 2B
Ray M0DHP has a strange aromatic solder experience...

Wednesday, January 28, 2009

My ET-1 / FETer (Transceiver Made with One FET)

Magnificent, don't you think? This is my version of the ET-1 or FETer. It is an HF transceiver using only one active device -- a single MPF-102 Field Effect Transistor. I didn't have a 4 pole Double Throw switch in the junkbox, but I did have a 4PDT relay, so I used the relay. So far I have only built the receiver. It is working nicely. I was listening to German and Polish stations on 80 meter CW this morning.

I had always wanted to build W2UW's ET-1... I've been reading in "Empire of the Air" the inspiring account of Armstrong's invention of the regen receiver... Then, along came SPRAT 137 and G3XBM's FETer. I could no longer resist. Solder was melted.

It is great fun to listen to 80 meters and realize that the only thing between you and the ether is one small FET (you can see mine standing proudly atop the relay!) . Its a lot like using a crystal receiver. That one FET is serving simultaneously as an RF amplifier, mixer and BFO!

On to the transmitter! Thanks to OM Armstrong, to Glen (W2UW), and to Roger (G3XBM).

Monday, January 26, 2009

Minimalist Radio: The ET-1 and the FETer

SPRAT # 137 (Winter 2008-2009) has a number of great articles on minimalist radio -- very simple rigs with low parts counts. Roger G3XBM has a very nice re-make of the ET-1, first introduced by Glen Yingling W2UW in SPRAT 108. I remembered Glen's article -- I always wanted to try it. The ET-1 has just one active device: an MPF-102 FET. And it is a transceiver.
The schematic of the ET-1 appears above. I started building mine yesterday. Got the receiver done and --- WOW! -- heard some 80 meter signals this morning. More to follow...

Sunday, January 25, 2009

The SolderSmoke Store: T-shirts, Caps, Mugs, Bumper Stickers, MORE!


A while back, a SolderSmoke listener suggested that we open up a T-shirt store. That was a good idea. Here it is! The SolderSmoke Store at CafePress. We design the items, CafePress does most of the work, and a portion of the revenue will help keep the podcast and blog going.

Right now we have T-shirts, sweatshirts, mugs, hats, and some bumper stickers.

We are open to suggestions: If there is something SolderSmoke or homebrew or QRP-related that you would like see on a T-shirt, coffee mug, hat, etc., drop me a line and we will see if we can fit it in with our fine line of Knack-wear!

Here is the link to the store:
http://www.cafepress.com/SolderSmoke

Saturday, January 24, 2009

My Frequency Counter. FIXED!

I mentioned my broken frequency counter... Tony Fishpool, G4WIF, of G-QRP sent me a replacement CMOS chip. The counter is now counting beautifully. It was a real chore to get the bad chip off the double-sided board, then I doubled my work by putting Tony's chip in upside down. It doesn't work very well that way. I did another chip extraction. By this time I had all kinds of lifted pads, broken traces, pins on the verge of breaking. I felt sure that all the heating and de-soldering had destroyed the CMOS. But no! It lives!

This was a very satisfying troubleshoot and repair. I feel like Dr. House. The whole thing was made even nicer by the fact that the repair part came from the junkbox of a friend. Thanks Tony!

Looks like the old counter is still well-calibrated. It has my QRSS sig at 10140070. ON5EX's grabber puts me at 10140050. So the counter is 20 Hz high. Not bad for flea market junk.

A. Frederick Collins - Radio Pioneer from my Hometown

I've been reading "Empire of the Air" by Tom Lewis, and I've been struck by how much radio history took place in the Hudson Valley. I have a special interest in this, because I grew up there. As I was reading about Lee de Forest (BOOO! HISS!) I started wondering if the lake near my parents' house was named for him. I grew up near Lake de Forest. Surprisingly, Google and Wiki did not provide the answer (anybody know?), but in the course of my Googling, I discovered something that really surprised me: my little town was the summer home of radio pioneer Archie Frederick Collins (what a great name!). Collins was one of the pioneers of radio telephone, using arc transmitters to send his voice out over the airwaves. Some of the experiments took place right in dear old Congers, N.Y. Collins seems to have been a great guy -- in addition to his pioneering work in radio, he was prolific author, writing for the Knack victims of the day.

Here's a 1908 Scientific American article about his radio work:
http://earlyradiohistory.us/1908col.htm
Here's a good Wiki article on him:
http://en.wikipedia.org/wiki/Archie_Frederick_Collins

One quote from the Wiki: He wrote scientific adventure series novels such as "Jack Heaton, Wireless Operator(1919)" which told of the training and adventures of a 15 year old wireless amateur. Many of his books, such as "The Boy Scientist," (1925) had lots of illustrations and few equations, with an emphasis on "hands-on" experimentation, at a level intended for high school students. After discussing the "Einstein Theory," Collins tells his readers how to build a spectroscope, a radio, and a x-ray machine for home experimentation. Collins encouraged his readers to use their home-built x-ray machine to examine their own bone structure with a fluoroscope.

Friday, January 23, 2009

Degenerative Feedback and Distortion Reduction

Continuing on negative feedback, on SolderSmoke I recently asked for help in understanding why negative feedback is said to "reduce distortion." Let me know if you think I'm on the right track. Thanks to all who sent e-mails.

Following Fourier’s advice, let’s think of distortion as an additional waveform riding along with our desired signal. In the diagram we have a 5X voltage amplifier with 20 mV at the input, let’s say that it produces a complex distorted waveform that consists of our desired 100 mV sine wave, along with an ugly 10 mV distortion signal.

The feedback network takes 10 percent of both signals and feeds them back to the input (with a 180 phase shift). At the input, for the desired signal, the 10 mV of feedback meets up with 30 mV of input signal (as in TM 11-455, I’ll keep outputs the same, but increase inputs); we end up with 20mV at the input to the amplifier device. This then goes through the 5X amp and we get our 100 mV output.

But look what happens to the ugly distortion signal: It arises IN the device. When the feedback portion of this distortion gets to the input, it does NOT meet up with an input signal. It just goes back through the amp. So the feedback network takes 10% of the 10 mV distortion, introduces a 180 phase shift and sends this 1 mV waveform through the 5X amp. At the output of the amp we can think of the original 10 mV of distortion combining with what is now a 5mV out of phase signal. In this case, half of the distortion signal is canceled. We can say that compared with the no-feedback amplifier, distortion has been reduced from 10% to 5%. We can say that this circuit discriminates against distortion signals that arise inside the device. The desired signal meets up with the input signal, cancels a portion of it, but then the remaining signal goes through the amp producing the desired amplified signal. But the distortion signal has nothing to meet at the input. It just goes through the amp and then cancels a portion of distortion signal at the output. More desired signal, less distortion.

Thursday, January 22, 2009

Busted... By the FCC

When I was a kid, I lived in fear that one day men in black suits from the Federal Government would appear on the front steps of our house in Congers, NY. I worried that they would discover some harmonic from my Heath HW-32A doing something awful to air traffic control comms.... or perhaps they would want to check my log book (that would have definitely resulted in jail time).

George, K8VU, sent along this link to an article about a kid who DID get a visit from the FCC:
http://www.rwonline.com/article/72138

The Radio World site seems to have a very nice collection of articles. Thanks George.

Tuesday, January 20, 2009

The Power of QRPp with QRSS (very low power, very low speed)

Here is a screen-shot taken in New Zealand back in 2006 (ah, the good old days, back when we still had a few sunspots). Colin, G6AVK, describes what you are seeing:

Hi Knights,
Whilst looking through some 30m captures this evening I thought it good to
share this with you, the Capture was from Mike ZL4OL back in early 2006.

Stations in this Capture listed from Top to bottom:
(675) G6AVK JO01HO sawtooth, 10mW into the Longwire.
(660) I0SKK JN61GV 25-30 mW max. Vertical R7 30 m high (on the top of the
roof)
(635) G0UPL 360mW. Antenna: full size half-wave dipole (14.2m) in the Attic.
(620) IW0HK JN61FV, 20mW's, Antenna used was a "Fishing Rod" vertical, 7.5
meter high.
I am looking forward to when Condx will be like this again.
73 Colin
G6AVK - JO01ho

Beta Independence (an explanation from 1941)

We've been talking about why negative feedback renders irrelevant even large variations in the gain characteristics of individual tubes and transistors. As is often the case, I had to go through several technical tomes before I found a book that really answered my “how does it really work” kind of questions. Enlightenment on negative feedback came to me from the days before Pearl Harbor, from War Department Technical Manual TM-11-455 “Radio Fundamentals,” published on July 17, 1941.

Figure 1 shows an amplifier that increases the input voltage by a factor of 100. In Figure 2, 10 percent of the output voltage is fed back – out of phase – to the input. Now, when trying to understand feedback amps, you can find yourself trying to figure out how changes to the input produce changes to the output, which in turn produce changes at the input, etc. Like the amplifier you are trying to understand, you become like a dog chasing his tail! TM 11-455 elegantly breaks this cycle. It has us think this way: Assuming we maintain 100 mV at the output, with 10% fed back, how much of an input signal will we need? Well, the amplifier itself still amplifies voltage by 100. So we still need a net voltage of 1 mV at the input. So now we need a signal voltage of 11 mV to produce the 100 mV output (Figure 2). The feedback cancels 10 mV, putting 1 mV on the input. Negative feedback reduces gain.

How does negative feedback reduce the impact of variations in the gain characteristics of the individual devices? Without feedback, if we substituted our 100X amplifier for a device with a gain of only 50, our 1 mV input would produce only 50 mV out, possibly playing havoc with our overall design. We’d need an input of 2 mV -- a doubling of the input voltage -- to make up for the variation, to get our desired 100 mV output. But look at the situation with feedback (Figure 3). We still assume 100 mV at the output, and 10 percent negative feedback. But now, even though device gain has dropped from 100 to 50, we only need an increase in signal input from 11 mV to 12mV. With this feedback arrangement, if we kept the input signal level at 11mV, and then used a transistor that happened to have only HALF the voltage gain of the original device, the output voltage would drop only to around 92 mV, a drop of about 9% -- not the 50% drop we saw in the circuit without feedback. Negative feedback reduces the impact of gain variations from device to device. It makes our amplifier stages more “beta independent.” Negative feedback reduces the impact of gain variations from device to device. It makes our amplifier stages more “beta independent.” Our thanks to the War Department!

Sunday, January 18, 2009

SolderSmoke 99

SolderSmoke99.mp3

January 18, 2009
Epiphany in Rome -- La Befana brings two Gerbils (Dot and Dash)
Ice skating near (but not on!)the Tiber
QRSS: Eldon's beacon spotted. 723 miles with 15 millwatts
QRSS Calibration Problem: My proposed solution
A Tale of Two BENELUX Grabbers: ON5EX and PA1SDB
Watching VK2ZAY cross Tasman Sea. Watching G6AVK reach VK6DI
Inspiration from old SPRATs: From PA3BHK and W7ZOI
Book Review: "Empire of the Air" (Good bios, but author Knack-less)
AA1TJ's CFL revolution reaches Cuba. Now a CFL receiver.
AA1TJ's "Reggie" converts all sigs to QRP!
Several new videos on the Blog (from WA7MLH, N0TU, KD1JV)
MAILBAG: Ragav VU3VWR has Knack since 9th grade. Wants to QRSS in VU
Nick M0NJP likes show, getting used to the voice, Amazon UK instructions
Bryan VK3HXR has eeePC running Ubuntu
Paolo IK1ZYW has external keypad chips for FT-817 (available at cost)
Jim AL7RV's wife thought SolderSmoke gave him a fit. Agrees on 1)design 2)build
Wes W7ZOI on feedback circuits
Joe Rocci has an LtSpice model for the NE602
Gerri EI8DRB asks if he should buy a Drake 2-B (Uh... YES!)
Steve "Snort Rosin" Smith : SMT paste lacks bouquet of 60/40 multi-core
Chris KC2LFI prescribes 3500 Hz notch for sibilant SS problem (advice followed)

Saturday, January 17, 2009

Homebrew Rigs from WA7MLH



Jeff Damm, WA7MLH, was the builder of some of the rigs that appear in "Solid State Design for the Radio Amateur" His DSB/CW Direct Conversion receiver for 75 meters is in that book. Last January, Jeff put together a video that describes some of the rigs and pieces of test gear currently in his shack. Beautiful stuff.

Thursday, January 15, 2009

International Year of Astronomy -- 2009


Hey, the signals are electromagnetic. They are very QRP. And the receivers (well, at least the "amplifiers") are often homebrew. It's 400 years since Galileo spotted Jupiter's moons. To commemorate this, we have IYA2009. The organizers are developing a program to allow people to build their own simple telescopes, and are encouraging those who already have 'scopes to get out and let their neighbors take a look at the wonders of the universe. We did a bit of this "sidewalk astronomy" in London. We'll do our part for IYA2009 by taking our 6 inch Dobsonian out into the piazza here in Trastevere. Check out the project web site:
http://www.astronomy2009.org/globalprojects/cornerstones/galileoscope/

RADIO PIONEER: HAROLD BEVERAGE

I came across this interview with Harold Beverage, inventor of (among many other things) of the antenna that bears his name. I liked his description of the personalities and design methods of some the people he worked with (including Ernst Alexanderson).
Take a look: Beverage IEEE interview

Wednesday, January 14, 2009

Eldon's Beacon: GRABBED!

Last week we put out an all points bulletin for the new QRSS beacon of OM Eldon (scroll down a bit). Yesterday the signal was captured by Stu. Distance covered: 723 miles. Eldon's power out: 15 milliwatts. That's correct: fifteen milliwatts (Eldon had earlier calculated 150 milliwatts, but this turned out to be incorrect). Above is Stu's screen shot -- you can see Eldon's FSK signal: WAOUWH (read along the top of the square wave) at around 10140050 Hz.

Here is their e-mail exchange:

Re: Is this your QRSS beacon?
Tuesday, January 13, 2009 6:17 PM
From:
"Eldon"
To:
"Stu"
Thanks Stu, and thanks to Bill Meara and SolderSmoke.com
This is my my FIRST confirmed QRSS report from my first QRP rig, it is about 150mw into a North South 6 foot Loop about 6 feet AGL.
You represent it on about the freq that I think it is - without too much calibration on my part.
See: http://qth.map.googlepages.com/?qth=CN97BV43TU&from=CM87vk
Is your Grabber online?
Thanks for the report.
Regards, Eldon Brown - WA0UWH
Don't let the Zero land call fool you, I got it many year ago while in the Navy stationed at Denver, now located in Seven land near Seattle.
eldonb@ebcon.com

On Tue, Jan 13, 2009 at 12:39 PM, Stu wrote:
Eldon,
Copied the following screen shot on 30m today a few minutes ago – I think the FSK is your callsign – WA0UWH?
Copied with Spectrum Lab in CM87vk – TS-B2000 with 160m inverted L plus antenna tuner to load up on 30m
73's
Stu

Monday, January 12, 2009

KD1JV's Surface Mount Video

OK SolderSmoke fans, here's a video for YOU! Steve "Melt Solder" Weber has put out his first video. It is about surface mount soldering. It is all very interesting, and some actual solder smoke is released, but I was a bit disturbed when Steve put the PC board on an electric stove and then started using this purple thing that looked and sounded like a hair dryer. Made me yearn for my Weller soldering gun. Great video Steve, thanks!

Designer: Douglas Bowman | Dimodifikasi oleh Abdul Munir Original Posting Rounders 3 Column