I knew that Alan Yates, VK2ZAY, was just the man for this project. Alan and I met up several years ago when Billy and I spotted and built his Trivial Electric Motor (we still have it, and occasionally fire it up to amaze visitors). On SolderSmoke 102 I mentioned the possibility of a one transistor QRSS transmit station. Obviously this would require some sort of mechanical keyer. I thought of a clock drive. Alan pointed out the in the 1982 Steven Spielberg movie, ET had used a saw blade as his mechanical modulator (see above). Alan also had some intriguing ideas of his own:G'day Bill,
Thanks again for noticing my QRSS signal making it through to Europe.
Your talk about mechanical solutions for QRSS modulators immediately
made me recall "E.T. the Extra-Terrestrial". The "Phone Home" device he
built had a modulator based on a sawblade IIRC - its been years since I
watched that 1982 classic.
One easy hack might be to use an AC synchronous motor out of a gobo
rotator (for example, I got one out of a fibre optic christmas tree that
expired from overheating). Its reduction drive results in a fairly slow
rotation which might drive a modulator plate. You could do the pickup
optically using a LED/photodiode (or transistor, or even an LDR I guess)
transmission pair. Electrical contacts would work too, but doing it
optically probably means it would have a longer life.
A tape loop system might also be practical and would allow long
modulations to be encoded at reasonable tape rates. A syncro-drive gobo
has to be turned fairly slowly and pushes the "density" of the data
fairly high so the mechanical or optical sensor gets harder to just
throw together. I am sure a clockwork driven disk could be made to
work, it just might have to be fairly large.
Mechanical readout might be a microswitch and holes in the plate, or
even using PCB material with the pattern on it (etched or masked), and a
brush contact. To minimise wear a brass small roller held against disk
with spring tension would work. Oxidation on aging might become a
problem - yeah the more I think about it I am liking optical better.
You can also do it electrically using a diode matrix which can be read
out with some counters. Of course that defeats the original purpose
which was to make a single transistor QRSS beacon with a mechanical
modulator.
One completely insane idea that just occurred to me is to build a slow
mechanical oscillator (say driven by a Stirling Engine or a Curie Point
Pendulum heated by a small candle) and modulate the RF oscillator with
that. The mechanics or thermal system might directly effect the RF
oscillator frequency. Who will make the first candle-powered QRSS
beacon with thermopile PSU? :-)
Regards,
Alan
http://www.vk2zay.net/
Posts
