Another Great Blog from Canada

Earlier we wrote about QRP POP's reemergence in blog form. 

Here's another great blog from Canada, this one from Steve VE7SL: 

http://ve7sl.blogspot.com/ 


Our book: "SolderSmoke -- Global Adventures in Wireless Electronics" http://soldersmoke.com/book.htm Our coffee mugs, T-Shirts, bumper stickers: http://www.cafepress.com/SolderSmoke Our Book Store: http://astore.amazon.com/contracross-20

Midwest Mighty Mite from KK0S

Wow, beautiful job Bruce.  I was hoping that a check of the Reverse Beacon Network would reveal that someone had heard you, but no joy.  Keep at it.  You may become the first CLA member in this round to make a contact.  

Bill - 

Hello from the Midwest chapter of the CLA.  Here's pix of my just completed Michigan Mighty Mite.  Nothing was purchased specifically for this project.  It was put together using only parts already on hand.  The only previously unused parts were the front panel sockets and one resistor.  The rig uses a 2N2219A transistor salvaged from a junked industrial control board and a color burst crystal that actually first oscillated in a tube-type color TV some 40 years ago.  Loading into my ground-mounted vertical, this MMM seems to be most stable at a draw of 87ma at 12.6 volts.  The arithmetic seems to work out at somewhere around 650mw into the ether.  I called for about half an hour around 2300Z, but got no takers... it was still pretty early for 80m and I had an extremely high local noise level.  The rig seems to run about 1khz high. I'll give it another go this weekend. 

72 - Bruce - KK0S.

Our book: "SolderSmoke -- Global Adventures in Wireless Electronics" http://soldersmoke.com/book.htm Our coffee mugs, T-Shirts, bumper stickers: http://www.cafepress.com/SolderSmoke Our Book Store: http://astore.amazon.com/contracross-20

Jean Shepherd's Shack Gets Hit by Lightning

Yikes!  This is really good!  Thanks to Harv for sending us this link:  Poor Shep!

https://www.youtube.com/watch?v=akyTVNorXQ8&feature=player_detailpage

Greetings Bill,

Have been loving each Soldersmoke Podcast and Blog Segment recently.
You and Pete have made the program a superb treat while I've been busy with the Radio Room construction.


Building the Radio Room is like constructing an ARK in your Basement. Everything is being done in pairs
and the water keeps rising. (No kidding)...
I encountered two water breaks in the Radio Room while construction was under way but, that is a whole different story.
Fortunately none of my prized boat anchors were damaged.

The project; (The Radio Room), includes operating positions for 14 complete stations.
That wouldn't be too bad except I'm constructing walls, benches and over-head lighting from complete scratch.
While this is going on, I wanted to finish my 3.579 MHz CBLA transmitter and return to the Minima build that I started in April 2014.
However, in September, I retired and moved to another state.  The reality of the latter took awhile to sink in. Most Ham Projects took a back seat to higher priorities. I will soon have the Radio Room I always dreamed of. The Drake 2B fills the space with the sound of 20 Mtr CW and the anticipation of having the HT-37 brewing away is just around the bend.

I'm taking a short sabbatical from the Ham Shack construction to get caught up on some other household projects.
In this notion of taking a needed break, I rediscovered Jean Shepherd's programs on Youtube.
I started to dissect Sheps monologue when I found that familiar path in my own life as a 15 yr. old Ham in the mid-1960s.
I'm sure you too can relate to Jeans' life as a kid.
I really liked his broadcast https://www.youtube.com/watch?v=akyTVNorXQ8&feature=player_detailpage
"Lightning Hits the Ham Radio." Near the end of the program, he mentions that his life was over because his
Dad hammered him over the damage to the house by the lightning strike. I'd love to hear the rest of that story!!!

Please keep up the great efforts with Soldersmoke and bringing us all that good Tribal Knowledge. I think we should all go build something.
Looking forward to what's next. Thanks to You and Pete.

73's
De -=WA3EIB=- Harv
Eastern Idaho 


Our book: "SolderSmoke -- Global Adventures in Wireless Electronics" http://soldersmoke.com/book.htm Our coffee mugs, T-Shirts, bumper stickers: http://www.cafepress.com/SolderSmoke Our Book Store: http://astore.amazon.com/contracross-20

Mahalo! WH7TT's Hawaiian Mighty Mite

This is our western-most MMM.  Edward took one of the 3.579 rocks and, using a Radio Shack breadboard (much used by Michael Rainey AA1TJ) built his version of the Mighty Mite.  When I saw the long clip leads to the coil I was apprehensive, but obviously it works.  Great job Edward and thanks for sharing with us your island rig.  Mahalo! (I like saying that!)

Our book: "SolderSmoke -- Global Adventures in Wireless Electronics" http://soldersmoke.com/book.htm Our coffee mugs, T-Shirts, bumper stickers: http://www.cafepress.com/SolderSmoke Our Book Store: http://astore.amazon.com/contracross-20

W1KF's Connecticut Mighty Mite

Steve W1KF's Connecticut Mighty Mite is the neatest build so far:   it has a front panel and knobs and plugs and everything!  Pete Juliano commented: "Very cool –and elegant. I loved the transistor in a front panel mounted socket with heat sink. Wished I had thought  of that –great idea."  Steve is on the air at grey line times, looking for contacts at 3.579 Mhz.

Our book: "SolderSmoke -- Global Adventures in Wireless Electronics" http://soldersmoke.com/book.htm Our coffee mugs, T-Shirts, bumper stickers: http://www.cafepress.com/SolderSmoke Our Book Store: http://astore.amazon.com/contracross-20

New Homebrew Book: The Joy of Homebrew Oscillations

Sent to us by Ben Tovar.  Soon to be available in EE-book (get it!)   Thanks Ben! 

Our book: "SolderSmoke -- Global Adventures in Wireless Electronics" http://soldersmoke.com/book.htm Our coffee mugs, T-Shirts, bumper stickers: http://www.cafepress.com/SolderSmoke Our Book Store: http://astore.amazon.com/contracross-20

SolderSmoke Podcast 169: The Colorburst Liberation Army, Arduino DDS and the Tradition of Ham Experimentation

SolderSmoke Podcast #169 is now available: 

http://soldersmoke.com/soldersmoke169.mp3

-- 25 crystals "deployed"  to new Colorburst Liberation Army recruits
-- OBJECTIVE:  For now, just oscillation 
-- Using the Reverse Beacon Network (when time comes to transmit)
-- W2DAB's Mighty Mite: trials, tribulations, triumphs (and karma)
-- Explaining the Mighty Mite (all 7 parts)
-- Minima IF evolution -- up to 25 Mhz? 
-- Chuck Adams and "Experimental METH"!!!!!!!!!!
-- Different kinds of Arduinos
-- Si5350s and amateur experimentation
-- First menus, now KEYPADS! 
-- The launch of Orion
-- N2CQR/HI  Beach Portable DSB on 20
-- Video review:  "The Wanderers"

EL CLA UNIDO JAMAS SERA VENCIDO!   

Our book: "SolderSmoke -- Global Adventures in Wireless Electronics" http://soldersmoke.com/book.htm Our coffee mugs, T-Shirts, bumper stickers: http://www.cafepress.com/SolderSmoke Our Book Store: http://astore.amazon.com/contracross-20