A Homebrew QSL Card for a Homebrew to Homebrew Contact

I got a card from Rick N3FJZ today.  FB!   Note the lines for "VFO":  Si5351!   And "Finals": Dual IRF-510s!   Rick wrote that his card is also homebrew!  Thanks Rick.

WA7HRG's LBS-ZIA-Simple-Ceiver Project

Wow Pete! 

Thanks for the GREAT info. Can't wait to try things out. One day soon (Christmas is coming) I will have a new computer and can start learning LTSpice.

Great tribal knowledge on the over all gain adjustments as well. And I won't tell the illuminati.
As for your articles, blogs, tribal knowledge and pot casts with Bill.  Love them. Listen and read everyone. Print and file for later. Mostly because I can't keep up with you on all the great projects.

But in the sprit of home brew and not just stuffing boards or following explicit directions I have built the LBS with my own mods.

1. It's dual band.  Almost. 40&20 LPF and BPF already in. 5watt tx works great but plan on putting in about 40 watts them getting around to making the dual band changes to the sketch and finishing things. I used my own audio amp design. Well not all mine. Manufacture spec sheet and Internet info and LBS. Your preamp, a NTE1288 10 watt audio IC.
Attached are pix of the LBS so far.

The current rig will be 20 meters only for digital modes. It will have a built in audio interface and thinking about including raspberry pi and TFT screen. But that's got to be down the road.
It's a hybrid again. Parts of LBS and ZIA and parts of Simpleceiver. I already had the ZIA IFs built so will have to try the dual FET on the next rig. Modified the audio again. Put in an FET AGC between the preamp and the final IC. About 40 dB dynamic range so should cut down on the vol control twisting when listening to a QSO with one strong and one weak station. So far this build consists of a box of tested modules that have not been hooked together yet. Your FET RF amp will the next board.

Also working on an Arduino Lightning detector with 5115 display. Almost got that one....   Have built couple prices of test equipment. A xtal osc with onboard freq counter and an LCR Transistor tester.

Oh and lets not forget the MMM on 3.58!

I personally know one other ham building a LBS. So don't think your talking into outer space. We are out here listening!  And learning!  And having a great time.

And yes, when I catch up on projects, I'm going to build the actual Simpleceiver.

Thanks again for the fast response. I'll let you know how it turns out.

Jim
WA7HRG

N3FJZ's New Blog and Impressive Rigs (and a Bandscan!)

Rick N3FJZ and his Lakeside direct conversion receiver bolstered my spirits when I was getting some harshly critical reviews of my signal on 40 meters a while back.  Rick happened to pick me up with his homebrew receiver. The Radio Gods seemed to be trying to balance things out.  There is a LOT of radio mojo in Rick's Lakeside receiver.  Not only does it eschew digital synthesis of the VFO signal, it goes a step further and uses a permeability tuned oscillator -- very cool.  The component and material sourcing adds more luster to the rig.  Rick writes: "A lot of the components used to construct the LS-40 were harvested from discarded consumer electronics I collected back in the 1980's. The base substrate material for the Manhattan style construction, as well as the RF tight enclosure for the PTO, is made from a flattened out tin plated food can. All components are discrete; i.e. no IC's or CPU's."

Rick has launched a blog.  He has some amazing stuff on it.  Be sure to check out his ZX-SSB rig.  Amazingly detailed documentation Rick!  Thanks. 

Find Rick's Blog here:
http://www.remmepark.com/circuit6040/

YAMMM! Yet Another Michigan Mighty Mite! From KC0ZIR in Northern Virginia

Bill,

Thank you for the podcast and the loads of tribal knowledge from you and Pete! I recently started going through the SolderSmoke backlog, and I am just getting to the Colorburst Liberation Army episodes. I had some crystals for 40m laying around, so I started reading up and winding on a film canister.

Later, I thought I'd hop up the current episode of the podcast while I work, and I heard you guys talk about another push for the Michigan Mighty Mite. I happened to be salvaging bits from an recycling-pile VCR at the time, and I came across this crystal with a familiar label: 3.579545. The radio gods have spoken, so I will be winding a new coil for 80m.

I heard you mention the anonymous benefactor, but I have some aluminum foil, and I plan to brew the cap as well, there are a few options here: http://www.instructables.com/howto/variable+capacitor/

I thought I'd tell you a quick story anyway, because I just want to be a part of the fun. When I was little, our radios all had retractable antennas, and the TVs all had rabbit ears or loops. I would spend nights trying different materials and orientations to try and get better signal. At one point, I ran as much wire as I could in my brother's room (he had a big garage-sale cabinet tv), and we were getting channels from all over the place. We knew when each channel would be showing reruns of Star Trek, so we could catch an episode or two almost every day of the week. We even got some channels that I thought were only available on satellite. I had read in my box of Popular Mechanics magazines that some dish setups re-broadcast their signal on VHF/UHF frequencies with low power, I always suspected that's what we were picking up. 

I didn't know much (or really anything) about the theory behind antennas at the time. I'm still a bit hazy, like with the 75 ohm / 50 ohm cable thing. I thought resistance was a function of length, how can different lengths of coax be the same ohm rating?

Anyway, I just wanted to let you know I'm new to homebrewing, and you guys are a big part of that!

73,

Dan, KC0ZIR

Northern Virginia (a little to the left of you, it sounds like)

..............................

Excellent Dan! 

Getting the 3.579545 MHz rock out of a dead VCR definitely adds mojo to the rig.  Indeed, TRGHS! Thanks for sharing your Knack Story.   I hope to meet up to you, perhaps at the hamfests of Northern Virginia.  In my capacity as Grand Poohbah and Arbiter of Capacitor Eligibility, I hereby deem you  ELIGIBLE for a variable capacitor.   Our secret benefactor will be contacting you.  

73  Bill   

YS1RS's Salvadoran Tuna Tin and Drake 2B

Roberto YS1RS recently acquired a Drake 2-B and has some minor tech troubles.   I am sure Alan Wolke will come up with the proper diagnosis. (The receiver works fine on the standard bands, but not on the accessory bands.  He can hear the crystal oscillator working fine on the crystal frequencies, but the radio is for some reason deaf on all the accessory bands.)  

Above you can see Roberto's Salvadoran Tuna Tin. 

 Roberto Describes it: "Homebrew: The Tuna Tin 2 QRPp Transmitter (TT2) with 300 mW output power, 14.060 MHz (20 meters band), Crystal controlled, 13 Volts, CW-Only. As its name implies, its main chassis is a Tuna Tin Can.  In our case, it is a delicious and exotic Salvadorian made tuna in chunks, topped with Jalapeño Chile. "

Check out Roberto's QRZ.com page:

http://www.qrz.com/db/ys1rs

Roberto has an amazing collection of gear, much of it thermatron, some of it homebrew.  And he has only been on the air five years.  He is a true member of the International Brotherhood of Electronic Wizards.  His work takes him to some of the most difficult places in the world.  FB Roberto! 

W7YRV: 197 feet up, on a Homebrew Tower

I talked to  Roy W7YRV on 40 SSB last night.   He was running a homebrew linear.  His blog has a lot of information on his truly massive desert antenna system.

http://w7yrv.blogspot.com/

Jean Shepherd's call signs, a QSL card, and much more

I was listening to 160 meter AM yesterday  afternoon when I heard a familiar call:  K2ORS.   I knew that someone else had picked up Jean Shepherd's last callsign, so I knew that I was not listening to a CQ from the great beyond.   Turns out that K2ORS is now OM Warren Ziegler up in Massachussets. Warren is active on HF and 160 and also works with experimental low frequency transmitters.  He is a big fan of Shep.  I think Shep would be pleased that someone who melts solder has his old call.

Searching for Warren on QRZ.com led me to a site with an amazing amount of info about Shep, his callsigns, and his early days in ham radio:

http://www.flicklives.com/index.php?pg=318

We talk about Shep quite a bit on this blog.  Here are all the Shep blog posts:

http://soldersmoke.blogspot.com/search/label/Jean%20Shepherd

Shep said that when, as a teenager, he got his ham radio license, he was so proud that he went around thinking of himseld as "W9QWN, a man of substance."  Indeed he was.

EXCELSIOR!