A Signal for SETI? HD 164595

That's the Russian radio-telescope that picked up what was thought to be a possible signal from an extraterrestrial civilization.   This article from the SETI Institute has some interesting tech info on antennas and power levels.  Definitely not QRP!

http://www.seti.org/seti-institute/a-seti-signal

Update on the PA3GSV M4MMRX -- And a Mystery

Note the establishment of a new acronym (M4MMRX) for Lew McCoy's Mate for the Mighty Midget receiver.  We  have needed this acronym for a long time, and SolderSmoke HQ is proud to have come up with it.  We do our part my friends.

Jan has made more progress on his amazing Dutch M4MMRX and has produced a short video showing the receiver in action with SSB and CW signals. 

Here is a bit of intriguing homebrew mystery:  Jan has gone to a LOT of trouble to create that semi-circular opening in the center of the front panel.  He even cut a corresponding semi-circular hole in the sewer pipe cap that serves as the large wheel in his amazing homebrew reduction drive.  But he won't tell us what he plans to do with that space.  So I ask you, dear SolderSmoke readers:  What is that space for?  Why the see-through panel and sewer-pipe cap?  What is Jan's plan? 

From Jan:

Hi Bill,

 The rattle is gone, so I made a little video of the MMMRX in ssb and cw mode.

 https://www.youtube.com/watch?v=Ye6myxY11LA

In the text, a ch327 and a ch45 crystal is mentioned, but I can’t get this to work.

The ch45 has a 453.6 kHz fundamental, for ch327 can’t find one.

The ch327 is a FT-243 one, tested several, but no fundamental somewhere around 455 kHz.

For ssb there is a ch45 and a ch46 crystal in, which should provide a bandwidth of about 2kHz.

(Still not totally in the clear how this should work with the very narrow resonance response of the crystals.

One should expect two peaks and nothing in the middle?)

For cw I found two ch45 crystals about 130 Hz difference in frequency, which seems to work well.

Still need to correct the 40m oscillator coil, then move on to finishing the receiver.

This is my first home brew tube superhet.

The project isn’t finished yet, but it sure is fun to build, and learned a lot during the process.

73  Jan

40673 LTSpice Model?

Does anyone have an LTSpice Model for the venerable 40673?  Or for a similar MOSFET?  I'm hoping to find something that I can easily plug into LTSpice. 

The NAA VLF Station (NOT QRP!) and Brad's Receiver

NAA Towers -- Arlington Va. 1913

Brad WA8WDQ wrote to us about a VLF (24 kHz) his receiver project (see below).  This led to some Googling about the VLF station NAA.  Wow, there is some important radio history associated with that call sign.   The station's original location was just a few miles from I where I live now.  From Wikipedia  (https://en.wikipedia.org/wiki/VLF_Transmitter_Cutler):

The station began operations in 1913 as a radio telegraphy station call sign NAA in Arlington, Virginia, at a facility next to Fort Myer. Although its broadcasts occasionally included band concerts and speeches, it was most famous for its nightly time signals. The three towers known then as "The Three Sisters" stood 600 feet, 450 feet and 200 feet (183, 137, and 61 m) above the ground. The site was referred to as "Radio", Virginia. The towers were the second largest man-made structure in the world behind only the Eiffel Tower. The word "Radio" was first used instead of "Wireless," in the name of this Naval Communications facility. The First Trans-Atlantic voice communication was made between this station and the Eiffel Tower in 1915. The Nation set its clocks by the signal and listened for its broadcast weather reports. The Towers were dismantled in 1941 as a menace to aircraft approaching the new Washington National Airport. The towers stand today at United States Naval Academy in Maryland, on the edge of the Chesapeake Bay. 

Be sure to read about the de-icing system for the antenna.  It uses more power than the actual transmitter!

From Brad:

Bill, Pete,

Here's the current status of the 24 KHz NAA SID receiver.  All the major sub-assemblies are mounted in the chassis and power is hooked up.  For convenience, I've been using the PowerWerx USBbuddy switching DC-DC converter to supply +5V power to the Raspberry Pi from the +12V input.  I've found them extremely RF quiet, clean and stable; capable of supplying 3A though this project will only need about 1.5A @ +5V.  At this point, I'm just waiting for Adafruit to send the A/D chip I'll wire up to the Pi on that empty protoboard just under the meter.  Speaking of the meter, it's not really needed as the Pi records and broadcasts over Wi-Fi the received signal level.  However, I like my projects to have some sort of physical human interface so I added the signal level meter and an LED for SID event alarms :).

As previously mentioned, my bench test of the receiver using my signal generator was successful.  Once everything is wired, I'll do an actual on-air signal test receiving NAA.

Brad  WA8WDQ

Radio New Zealand Booming in on 7245 AM

The day is off to a good start here at SolderSmoke HQ, with Radio New Zealand booming in on my homebrew Mate for the Mighty Midget receiver.  I was listening from around 0900 to 1030 UTC on 7245 kHz. Once again we see that The Radio Gods favor homebrew receivers. Gray line propagation also played a role.  

Above we see a technician at work at RNZ in 1945.  More historic photos here:
http://www.pcc.govt.nz/About-Porirua/Porirua-s-heritage/Porirua-s-suburbs/Titahi-Bay/Historic-site--Radio-New-Zealand-Transmission-Station