Radio Art -- Zenith Tube Ad

This ad was recently shown on the K9YA Telegraph.  I was wondering about its origins.  I asked noted thermatron guru Grayson Evans -- he referred the question to fellow tube guru and author Ludwell Sibley.  OM Ludwell gives us the origins: 

She’s in a promo for Zenith, an Italian prewar brand that sold European triodes of types originated by Philips, and a few equivalents of American types.  She’s based on classical Italian art.  Doing a high-wire act while holding a small early-‘20s European           radio! I have an 11 x 17 glossy color print framed on the wail in the display room.  I ran       her as the cover art in a long-ago issue of “Tube Collector.”  “Three cheers for the red,       white, and green!"

Ludwell Sibley is the editor of "The Tube Collector."   Great stuff.  Their web site is here: 

http://www.tubecollectors.org/tubecoll.htm

Sibley's book "Tube Lore" can be purchased here: 

https://www.amazon.com/Tube-lore-reference-users-collectors/dp/0965468305/ref=sr_1_1?keywords=Tube+Lore&qid=1569660647&sr=8-1

Thanks Grayson, Ludwell, and to the K9YA Telegraph. 

Pete Juliano N6QW on Homebrewing and SDR (Video)

Pete recently spoke to the Peel (Canada) Radio Club about SDR and homebrew.  The first 13 minutes show the club members but then it shifts to Pete.  Great stuff. 

Another Amazing Rig from VK3HN (Video) (EI9GQ Design)

ONE VOLT rms Reaches New Hampshire from Virginia

 My son Billy was back from college over the weekend (he came back to help me celebrate the completion of yet another orbit of the sun).  I was showing him my 8 part rig and telling him that it puts out 20 mW.  He asked a good question (he is a scientist):  What is the voltage at the antenna terminal.  I checked:  ONE VOLT rms.   About 1.414 volts peak.  Think about that.  My transmitter is sending a signal to New Hampshire from Virginia on less than the voltage of  AA battery.  

Two more spots on the Reverse Beacon Network (see above).  Another skimmer station in New Hampshire.  My signals seem to like the granite state. 

Virginia to New Hampshire (one way) on 8 Parts and 20 mW

Having gotten the regen receiver portion of the ET-1 transceiver working nicely, I'm now working on the transmitter.  This is a much easier circuit to get going. (Check out the right hand side of the schematic below --- that is the transmitter.)  I have not made any contacts yet, but yesterday I called CQ on 7050 kHz and watched the Reverse Beacon Network to see if any of the skimmer stations picked me up.  Success!   W3UA up in New Hampshire received my signals. 

I was running about 30 milliwatts to my doublet antenna. The transmitter consists of EIGHT parts.  And three of them are the low pass filter. 

Next step:   Bring the transmitter and receiver together by using the switching scheme that OM Yingling used.  The RX and TX will share the same single FET (MPF-102 or J-310) with all three leads from the FET switched from TX to RX.   Then I will try for the elusive QSO with a single FET. 

More ET-1 related posts here: https://soldersmoke.blogspot.com/search?q=ET-1

16x2 in Juliano Blue! The CRAP Single Board Transceiver by N6QW (VIDEO)

Another amazing rig and another very useful acronym from the wizard of Newbury Park.   

More here: http://n6qw.blogspot.com/

SolderSmoke Podcast 213 WE'RE BACK!

N6QW's Analog CW QRP Transceiver

SolderSmoke Podcast #213 is available. 

http://soldersmoke.com/soldersmoke213.mp3

7 September 2019

The dire consequences of our summer absence. 

50th PODCAST WITH OUR FRIEND PETE! 
THREE CHEERS FOR PETE! 

Pete's Bench Report

-- Transceiver Count:  FORTY!  
-- SDR RADIGS 
-- Colorful OLED screens
-- Pilgrims and Paisanos -- "Left Coast Homebrew SSB"
-- Pete builds a CW transceiver (see picture above)


Bill's Bench Report: 

-- Going minimalist
-- Tuna Tin 2 + Herring Aid 5 = Fish Soup 7 (and later 10)
-- My QRPp QSO with K1PUB overheard in Canada
-- Glen Yingling's ET-1 
-- Bill attempting a single transistor transceiver

SPACE NEWS

-- Antuino's Cubesat Origins. Farhan's Antuino Mods
-- Apollo 11 Anniversary
-- Possibly the best space book ever:  "Carrying the Fire" by Michael Collins
-- Chinese microsat sending eclipse pictures from the moon
-- LightSail 2 success
-- India has spacecraft in lunar orbit. 

Eric Sears ZL2BMI and Dino Papas KL0S on "QSO Today" Podcast

MAILBAG: 

ZL2PD's Sugar Cube VFO
N8WQ gets free samples
N5RWF Getting started, wisely wearing beret
VK2EMU Australian Ad for Collins Filters
W1PJE on new LDMOS PA transistors
KA4KXX Al Fresco 75 meter SSB rig with model plane engine mufflers!  

Forgot to mention:  W9TH still has manuals for whover owns Drake 2-B #4215.  Check your serial number! 

Single Transistor Regen Has QSO Potential (Video)

In my previous blog post I'd expressed skepticism about using a single transistor regen on the air.  But over the years I've learned to give new receivers a chance.  They usually don't work perfectly on the first try.  You have to work with them.  It is almost as if you have to peak and tweak a lot in order to get them to properly inhale signals from the ether.  

That has been the case with this little receiver.  I found some silly mistakes in my construction.  And I decided to try some more sensitive headphones.  I ditched the 1000 to 8 ohm AF transformer.  And I added a very small variable cap for fine tuning.  

The results are amazing. See video above. It performs as well as most of the direct conversion receivers I've built. It is remarkably stable.  

I do think I could make contacts with this receiver.   I might eventually go the full ET-1 route and try to do it with a single switched FET, but I think my next step will be to built a single transistor crystal controlled transmitter on the same piece of wood, and try to make some contacts with a two-transistor rig. 

Another Bout of Minimalist Regen Madness

My success with the Fish Soup 10 QRPp transceiver got me interested in further minimalization.  About ten years ago I built a rig presented in SPRAT 108 as the ET-1 by Glen Yingling W2UW.   It re-appeared in modified form as the FETer by G3XBM in SPRAT 137.  

This rig uses just ONE active device, an MPF-102 FET that is switched via a 3 pole double throw switch from transmit to receive.  The transistor is switched.  The receiver is a regen and the transmitter is a very simple crystal controlled one stage oscillator. See: 
https://soldersmoke.blogspot.com/search?q=ET-1  for info on my ET-1 effort. 
The transmitter was the easy part.  I don't think I made any contacts with this thing.  That has been kind of bugging me.  

So I tried it again.  Again, I had trouble with the receiver.  So I looked around for another single FET regen receiver design.   I found one on AA7EE's page.  It was designed by N0WVA:  
https://aa7ee.wordpress.com/2015/02/07/n0wvas-one-fet-regen-optimized-for-ssbcw-sounds-great/

I've had a variometer in my junk box since about 1994. (Given to me by Pericles HI8P. QEPD.) It was time to use it as the coil and ticker for this rig.   I liked the green LED in the source, and the promise that this thing would not oscillate at audio frequencies.  

I built in on one morning.  See pictures. It works.  I can hear CW stations.  But I think I would have a tough time making contacts with this thing.   OM Yingling worked 24 states with his ET-1.  Respect.  

King Hussein JY1 Speaks to Owen Garriott on Shuttle Columbia

I thought this was a very nice contact -- the recording provides a nice bit of radio history.  I wonder how the German station got the JY1 portion of the QSO.