Podcasting since 2005! Listen to Latest SolderSmoke

Thursday, November 21, 2013

BITX Build Update #20 -- Switchable Crystals, South Africa QSO


I got tired of popping the hood and manually changing my VXO crystals.  First I tried to switch the rocks using a rotary switch on the front panel, but I think the leads were too long and the output was kind of squirrely.   So I dug around in the junk box and found a 12 volt double pole double throw relay.  I put the crystal sockets across the two poles and ran leads from the armature terminals to the crystal terminals. I use the rotary switch to activate the relay.  I cover about 41 kHz of the 17 meter band with the two crystals. 

17 meters has been in great shape.  On November 16 I had a very nice contact with Syd, ZS1TMJ in Glenwilliam, South Africa.  That's about 8000 miles on 5 watts SSB.   

Our book: "SolderSmoke -- Global Adventures in Wireless Electronics" http://soldersmoke.com/book.htm Our coffee mugs, T-Shirts, bumper stickers: http://www.cafepress.com/SolderSmoke Our Book Store: http://astore.amazon.com/contracross-20

4 comments:

  1. Nice! What kind of antenna did you use for the South African contact?

    ReplyDelete
  2. The antenna was an ordinary half-wave dipole, about one half wavelength up, in the trees, fed with RG-58 coax.

    ReplyDelete
  3. Good QRP DX OM. Whatabout 2N7000s or ordinary transistors for switching those crystals?

    ReplyDelete

Designer: Douglas Bowman | Dimodifikasi oleh Abdul Munir Original Posting Rounders 3 Column