Podcasting since 2005! Listen to Latest SolderSmoke

Sunday, July 11, 2021

A Video Series on the Mythbuster 75/20 Rig -- Video #1


I am happy to report great progress on the Mythbuster project.  I have the receiver working on both 75/80 and 20 meters.  And it in fact inverts  the 75 meter LSB signals, turning them into 5.2 MHz USB signals for passage through my 5.2 MHz USB filter/BFO combo.  No switching or shifting of the BFO is needed. 

I am following Farhan's BITX20 advice -- I have paused in the construction and am enjoying the receiver that I have built.  I'll build the transmit circuitry later. 

Inspired by Frank Jones (you really should be reading the FMLA articles) I have this rig prototyped "Al Fresco" on a pine board that I found discarded on a neighbors front stoop.  

There is no RF amplifier in this rig.   Following the advice of multiple receiver gurus, I ran the BP filters right into the ADE-1 diode ring mixer.   I have the TIA amps set at about 24 dbm.  There is a lot of audio gain from the LM386 and the audio pre-amp.  This seems to be enough, even on 20.  I hear the band noise when I connect the antenna on both 75 and 20.  

Here is the first video in the series.   I'm posting them first on Patreon, then, a few days later, here and on the YouTube channel. 

1 comment:

  1. Bravo Zulu Bill! Nice project and the results so far are stunning.

    73's
    Pete

    ReplyDelete

Designer: Douglas Bowman | Dimodifikasi oleh Abdul Munir Original Posting Rounders 3 Column