Why 3.579 MHz for Old Color TVs? The Origins of the CBLA

As the Commanding General of the Color-Burst Liberation Army, I have often wondered why so many of these 3.579 MHz crystals were made.  Heck, even the crystal filter of my first homebrew superhet receiver used these crystals.   

When we launched the CBLA effort, we used the Michigan Mighty Mite as our transmitter of choice:  I mailed out around 40 of these rocks.  Many transmitters were built.  I have received reports of guys pulling their cars over to the side of a road (with hapless family members in the car) when a discarded color TV was spotted -- the 3.579 Mhz crystal would be quickly extracted.  Such was the dedication of the CBLA members (the family members were, of course, baffled).  

Anyway, the story of the Color-Burst crystals is deeply entwined with the story of the birth of color TV.  This fellow (above) does a good job of explaining the hows and whys of 3.579 MHz. Thanks to Al Williams and Hackaday for alerting us to this, and for some really useful commentary on the video: https://hackaday.com/2025/12/18/the-miracle-of-color-tv/

Viva el CBLA! VIVA! 

Some Links for the Michigan Mighty Mite and the Color Burst Liberation Army from Dave K8WPE

Dave K8WPE has been one of the podcast's best friends and one of its most loyal listeners.  Dave was recently going through some back issues of SolderSmoke.  This sparked a renewed interest in the Michigan Mighty Mite and the Color Burst Liberation Army.   Dave sent us some useful links on this subject.  (I had forgotten about the .io CBLA mailing list!)   Thanks for this Dave, and for all your support and friendship over the years.  

--------------------------------------------------------

Guys and Gals

Please listen to some of these podcasts as they are very encouraging to any ham young or old that might want to build something, even as simple as a Michigan Mighty Mite transmitter. Here are references to the Michigan Mighty Mite.  The podcasts are listed below.

https://makerf.com/posts/mighty_simple_shortwave_transmitter

https://www.qsl.net/wb5ude/kc6wdk/transmitter.html

https://qrpguys.com/mmm-40m-transmitter and others.

Check out podcasts # 166, 167, 168 in the Soldersmoke series for an in-depth discussion on this simple transmitter:

https://www.soldersmoke.com/

There are many YouTube videos also regarding this neat little transmitter and even companion receivers.

https://youtu.be/anxxs-G1MI4

Another option is to build the Cricket (a full transceiver kit) from Four State QRP Club that is available for 20, 30 and 40 meters $34.70 shipped:   

http://www.4sqrp.com/kitIndex.php

Or the 80 enter one available from the designer (when the 4SQRP Club retires a kit the designer is free to continue to sell them himself) NM0S on eBay for $26.25 shipped:

  https://www.ebay.com/itm/255527833693?mkcid=16&mkevt=1&mkrid=711-127632-2357-0&ssspo=AY5tgwaxQqO&sssrc=2349624&ssuid=MVIQRp0MSZK&var=&widget_ver=artemis&media=COPY   for $26.25 shipped.

If you build one of these kits John at 3rd Planet Solar in Gaylord has bags of crystals and a four position crystal switch kit for the Cricket and Pixie. Check him out at 

https://kc9on.com/

Please pass this on to your friends. Have fun. Build something.  Enjoy!  One person built the kit and framed it to put on the wall of his shack to PROVE that he could actually build an electronic gadget.  

Also there are many who use easily available color burst crystals from old TV sets and joined the Color Burst Liberation Army (CBLA). Check out 

https://groups.io/g/cbla

http://soldersmoke.blogspot.com/2021/05/michigan-mighty-mite-joy-of-oscillation.html

Dave K8WPE since 1960

CBLA Field Manual

I'm starting to worry about a visit from Homeland Security.   I found this on the blog of W6IEE. He blames K6FWT. 

The CBLA has a Yahoo Group: https://groups.yahoo.com/neo/groups/CBLA/info


Up the revolution!  Fight the Powers that Be!

Our book: "SolderSmoke -- Global Adventures in Wireless Electronics" http://soldersmoke.com/book.htm Our coffee mugs, T-Shirts, bumper stickers: http://www.cafepress.com/SolderSmoke Our Book Store: http://astore.amazon.com/contracross-20

SolderSmoke Podcast #251 Aurora! CBLA, Winterfest, Legal Action Against SolderSmoke, HB sBITX, SDR, Raspberry Pi, Rounded Passbands, MAILBAG

Aurora Picture by Dean KK4DAS

SolderSmoke Podcast #251  4-1-2024

Audio: http://soldersmoke.com/soldersmoke251.mp3

Videos: Podcast 251 Aurora! CBLA, Winterfest, Legal Threat, sBITX, SDR, RaspPi, Rounded Passbands, MAILBAG (youtube.com)

Travelouge:  Dean goes to the North Pole to see Aurora. 

A CBLA Call to Arms! 

Winterfest.  Lots of goodies.  MXM Industries 40 meter transceiver. 1 dollar. 

Jean Shepherd. Recording of Bill talking to Shep in 1976. 

 https://soldersmoke.blogspot.com/2024/03/listen-to-me-talking-to-jean-shepherd.html

Legal Trouble: Could put us out of operation for a while.  We need listener input. 

November 2023

December 2023

----------------------

Pete's Bench

Homebrew SDR (based on Zl2CTM’s original design) and how good it sounds.

Raspberry Pi Zero W is now working on FT-8 with digital adapter.

Ferrite Cores at Digi-Key (a replacement for the FT-37-43 where  you buy 100 and the price is 21 cents/each)

ADE-6 –great specs in HF but more expensive than the ADE-1

For Pete's recent blog posts, go to this site and click on "Archive" in the right column: 

https://n6qw.blogspot.com/2024/03/march-31-2924-happy-easter-to-those-who.html

----------------

Dean's Bench 

sBITX progress, McGyver-ing a lifted pad, replacing crystal on the CODEC board, sBITX success! See: 

https://kk4das.blogspot.com/2024/03/homebrew-sbitx-tx-modules-pa-lpf-and-mic.html

--------------------

Shameless Commerce Division:  Please use the Amazon link on the blog to start your Amazon purchases. And please consider using Patreon to support the podcast and blog.  We try to send extra content to our Patreon supporters. Mostly DIY RF --  Boards, Kits and Pete's PSSST

---------------------

Bill's Bench

More trouble with the 15-10 rig.  Rounded passbands in 25 MHz filter. See figure 4 in both links: 

https://www.arrl.org/files/file/QEX_Next_Issue/Nov-Dec_2009/QEX_Nov-Dec_09_Feature.pdf

https://www.networksciences.com/pdfs/tutorial.pdf

Experimenting with Balanced Mixers and Product Detectors. Paul VK3HN  Suggests the MC1496 chip; Walter KA4KXX points to SSDRA circuits

But it is on the air!  Using the PA from a BITX40 module and an RD06.  

Put an OLD dial from Pericles HI8P on 15-10 version 1.  Soul in the new machine.

Pericles' Dial on the 15-10 Rig 

Mailbag: 

Grayson KJ7UM's Hollowstate video. 

Mike WU2D's amazing 10 meter DSB transceiver. 

Jack AI4SV (Dhaka Jack) liked video of recent QSO with AzoresDSB rig

Mike AA1TJ and Dave AA7EE on backwaves and 100 uW QRPpppp

Dave G3UUR  on my curved passband problem

Alan W2AEW heard my only QSO with the MXM indsutries SupeRX/TX40

Wes W7ZOI, Mike WN2A, Walter KA4KXX. Farhan VU2ESE on passband, 

Ramakrishnan sent article about Charles Proteus Steinmetz.  Beautiful. 

Justin AC8LV built a receiver!  FB. 

San Francisco QRP:   KDOFNR TouCans Rig, and N6ASD Zinc-Oxide TX

Frank KC8JJL -- Another guy who heard first ham sigs from a homebrew rig. 

Nate KA1MUQ's homebrew thermatron superhet

Dino KL0S sent info on the PAL CB VFO I picked up at Winterfest. Airborne! 

Bob W8SX will be once again doing SolderSmoke interviews at Dayton.  Thanks Bob

Peter VK2EMU  Always good to hear from him.

Tobias Feltus -- Wisdom teeth removed, wondering if he will get sBITX hallucinations...

Rick WD5L continues to work on his Herring Aid 5

Ciprian YO6DXE wants to learn CW. No alerts from his FB Blog!

Todd K7TFC -- Likes CW, says it eliminates the Blah-Blah-Blah 

F1BFU's Amazing PSSST VFO

Fwd: CBLA is on the air

Hi Bill,     No contacts yet but it sounds good into a dummy load. HA!     My plan is to put the whole thing up at the antenna and run the keying leads into the shack. Not shown on the pill bottle cap is a 9V battery connection. At 9V I get about 100mW out. With out the LPF and using 12V I can get about 1/2 watt. Total cost of the project? $0.00         Thanks again for the inspiration to heat up the soldering iron once more.     73's     Jim.. WA7HRG

No cost!  That's the HB spirit!  I like the LPF and that pill bottle modular construction is very cool.

This is the perfect time of year for CBLA operation on the QRG.

73 and 3579.......Steve Smith WB6TNL
                   "Snort Rosin"
CBLA # 1

KK4DAS Michigan Mighty Mite Heard by WEB SDRs -- CBLA Mobilized!

Dean KK4DAS continues to do great things with his Michigan Mighty Mite.  He has been calling CQ on the Color Burst Liberation Army (CBLA) frequency of 3579 kHz.  I think I was the first one to hear him, but since that memorable moment he has been picked up by multiple Web SDR receivers, including the one at Penn State (PETE JULIANO'S ALMA MATER!)  (screen shot above, listen by clicking URL below).  He has also been heard by Web SDRs in Concord Mass,  Newport News Va, and Cleveland, Ohio.  FB Dean.  

So come on folks -- this is a mobilization call for the CBLA!  Get those MMMs on the air.  Send us reports and recordings from Web SDRs or the RBN. 

Listen to Dean's MMM as received at the Penn State Web SDR: 

http://soldersmoke.com/KK4DAS MMM.wav

It sounds great!  And nice CW Dean!  

Brian KA0PHJ's CBLA SolderSmoke Direct Conversion Receiver

Brian KA0PHJ finished his receiver in early March, and has been adding mods ever since.  He hopes to build another one for 80 meters and to use it with his Michigan Mighty Mite.  

VIVA EL CBLA!  VIVA! 

Brian writes: 

Bill,

I got my DCR finished in early march (built as designed), then added the RF gain, fine tune and frequency display. 

Wow, what fun!!

Gave me an excuse to organize all my discrete components and finally buy a Rigol!  

Now I plan to build one for 80m to go with the CBLA Michigan Mighty Might:) 

Keep up with good work. 

73,

Brian.

KA0PHJ

FB Brian!  Congratulations! 

---------------------------------

Join the discussion - SolderSmoke Discord Server:

https://discord.gg/Fu6B7yGxx2

 

Documentation on Hackaday:

https://hackaday.io/project/190327-high-schoolers-build-a-radio-receiver

 

SolderSmoke YouTube channel:

https://www.youtube.com/@soldersmoke

John KE2AMP's SolderSmoke Direct Conversion Receiver -- With a Spring-Loaded PTO

Dean and I often say that we too have learned a lot from this project, and that the receiver has gotten better as a result of all these builds.  But in KE2AMP's case we really see an innovation that nobody has used before.  But it is a great idea and it solves the "loose screw" problem of the PTO.  Check out the spring on John's PTO.  That is really smart.  Thanks John.  

John also sent me a crystal wrapper that will long be cherished by the CBLA (Color Burst Liberation Army):   

John wrote: 

Well I completed my DCR, and am receiving signals on 40 meter at 1900UTC. My audio amp will oscillate if I turn up over half way and my pto is little loose and makes it bit hard to tune. I put a light spring behind the pto bolt to give it some friction and tighten up. I’m thrilled that I’m receiving signals. I still want to add a front panel to mount the volume pot, the on/off switch and speaker if I have the room. 

I am so Thankful to Bill, Dean and everyone on the discord for this project I learned so much more being able to ask questions and follow along with other builders as we worked through each stage of the build. I definitely learned some things about oscilliscopes. And testing each of the stages as we went along. 

I would like to try my hand at a SSB transmitter to go along with this receiver. I have built a working MMM but was just to see if I could. I don’t know CW 

Oh and I included pic’s of something Bill will like. 

Pick it up at a ham fest last summer.

Will that get me into the color burst liberation army?

 Thanks Again, 73

   de John  KE2AMP

Consider yourself inducted John.  The CBLA needs innovative people like you!  

-------------------------

For more information on how you too can build the receiver: 

Join the discussion - SolderSmoke Discord Server:

https://discord.gg/Fu6B7yGxx2

 

Documentation on Hackaday:

https://hackaday.io/project/190327-high-schoolers-build-a-radio-receiver

 

SolderSmoke YouTube channel:

https://www.youtube.com/@soldersmoke 

CBLA: A CALL TO ARMS!

Dave AA7EE alerted us to this attack.  Please follow-up by posting reception reports (and triangulations!) in the comments below.  Dave writes:  

Recently, an unlicensed beacon (for which read pirate) has turned up on 3579 KHz. It seems to be located somewhere in the Western US, in the tradition of unlicensed HF beacons dating back to the late 80's that were solar-powered, and located in remote areas of the Southwestern deserts. The very first ones were a cluster of beacons around 4096 KHz (a frequency for which crystals were cheaply and easily available).

Anyway, I am equal parts intrigued and miffed by this latest clandestine operation. Intrigued because of the mystery surrounding all such clandestine operations. Where is it? What does it look like? Who built it, and why? I'm also miffed because, well, dagnabbit - it's on our turf!

It can be heard nightly after dark in the West, on both the KFS and KPH SDR's, in Half Moon Bay and Point Reyes respectively. It sends a series of 22 dits, then the call letters KOK, then more dits.

This is an outrage, a travesty, and a direct assault on the sovereignty of all self-respecting CBLA recruits! I call on all denizens of colorburst land to dust off their Michigan Mighty Mites and other plucky little transmitters, and launch the loud, raucous battle cries of  CQ, CQ, CQ into the ether. We shall fight them on the airwaves, we shall fight them in our radio shacks while drinking hot chocolate, winding toroids, and reading QST. We shall go on to the end. We shall never surrender!

I'm telling you Bill, when the very foundations of our existence are threatened, there is nothing that a colorburst crystal and half a watt from a 2N3053 transistor can't achieve. By golly, we can do this.

Your obedient colorburst servant,

Dave

AA7EE

SolderSmoke Podcast #240 NIMCELS? Hex DX, CBLA RX, PTO? Solid State HT-37? Exotic caps, Benches, SBE-33, TenTec 540, KWM-1 MAILBAG

 

SolderSmoke #240 

Monday September 19, 2022

http://soldersmoke.com/soldersmoke240.mp3

Sorry, I had some technical difficulties so my audio is a bit distorted. 

NIMCELS?  Niche Internet Micro Celebrities. I dunno....  Can our listeners come up with an acronym that describes our place in the universe?  

Sponsors:  Parts Candy.  Carlos in Chicago.  Great leads.  Don't scrimp with a crimp!  You need some good quality test leads on your workbench.   Get yours from Carlos.  Click on the picture on the blog page or go to PartsCandy on e-bay.  

"Techno Wizardry"?   Our lawyers at Dewey Cheatham and Howe will be after them for that!  

Bill's Bench: 

Hex Beam has made me a DXer.  91 countries. Having fun. Mozambique (Long path), San Andres island, and Saudi Arabia, all on Friday. All homebrew SSB 100 watts. 

Put my old 20 meter CW station back on the air:  Barebones superhet and the VXO 6 watter.   WYKSYCDS. This may be one of very few CBLA Receivers in the world!

Been getting active in the Vienna Wireless Society.  Dean KK4DAS is President and a lot is happening in the Club.  Makers group. Lunch with the group on Tuesdays.  Lots of fun.

We are looking at Farhan’s Daylight Again Analog rig.  Using parts from Dean’s 3D printer, we have made PTOs. See blog post for picture.   (But are they really PTOs? Or just Variable Inductors?) 

VFO madness.  Solid stating an HT-37 VFO. Grayson: “You have clearly lost your mind.” Perhaps.  100 MHz FM broadcast RFI. This brought me to capacitors and linear tuning:

SLC, SLW, SLF and Midline/Centerline caps.  Do special caps explain why some VFOs have linear tuning while others do not?  NO, not really.  You can get linear tuning with ordinary caps.  See blog post

Working on the bench.  Reading Adam Savage’s book on workshops and tools. (link to the book in the right hand column of the blog.   Some other workbench links on the blog.  Upgrading tools and test gear.  I have a proper bench power supply. Better side cutters.  Engineering rulers.  Digital calipers. Better solder (I was talking to Ron WA6YOU – a real solder authority - about this.  Kester 60/40 ).

SHAMELESS COMMERCE DIVISION: 

mostlydiyrf.com

Currently offering seven items:

·  UDVBM-1 (in three versions)

·  PG-TIA Broadband IF Amplifier

·  TIA-AGC IF Amplifier

·  Dual-Gate MOSFETs

·  OA741D Op-Amp (discrete components)

·  8-Pole QER Crystal Filter

·  I2C Rotary Encoder

Three more are shown as coming soon:

·  GP Audio Amp (general-purpose audio amp)

·  HyCas IF Amplifier with AGC

·  M-Cubed (Michigan Mighty Mite kit)

·         Mostly DIY RF offers hardware for hardware-defined radio. That's not a comment on software-defined radio. SDR is cool and useful, and it has its place.

·         In fact, I believe in explicitly making use of technology from all eras (vacuum tubes, discrete semiconductors, and integrated circuits

·         What does "mostly" DIY mean? It means making what you want and using ready-made for the rest. Even the most fanatic DIY'ing home brewer does this without much thought. He uses components he didn't fabricate, electricity he didn't generate, and theoretical knowledge he didn't discover. One can't fight all battles, one has to choose which to fight and which to leave to others. If an appliance-operating Ham doesn't want to fight at all, that's okay, but Mostly DIY RF has nothing to offer him.

--------------

I need YouTube viewing hours.  So I am putting some of the best SolderSmoke podcasts up on the YouTube channel.  Please listen/watch on YouTube. Here is the playlist:  https://www.youtube.com/playlist?list=PLv9MEKq1quk-gnxog7eBqY_y7cpQadf6T   

Google feed no longer sending our e-mails.  So please follow the blog, Get yourself a blog feed reader.  I use Feedly.  It is free.   Download, search in Feedly for SolderSmoke, hit subscribe and you are done. https://feedly.com/i/discover Follow Pete’s blog too!  It is easy.

 Pete’s Bench

Resurrections: 

SBE-33!

TenTEC Model 540

KWM-1

Mailbag:

Dan KC5VPI getting into homebrewing. No longer WRONG!

Michael AG5VG built subharmonic DC receiver, put it on 40 and 20.  FB.

Mike AA9IL working on old tube stuff including a DX-100 AMD UUHF gear up to 122GHz.

Ed WA4MZS liked the SolderSmoke book. USCG vet.  As is Mike Rainey AA1TJ Semper Paratus!

Clint KA7OEI – The Music of the Beams – My Hex  does not sing!  So far!

Walter KA4KXX – The Knack started early.  Video of getting a toolbox for Christmas. And working on PTOs!  He likes them!

Phillip G4HOJ Also working with subharmonic mixers – using the more complex 4 diode version.

Peter GW4ZUA Built an amazing rig from RADCOM (1980s) Cool VFO with varactor fine tuning and a coil with a dust core that was cut in half to minimize temp effect. Box now holds 3  band version of Pete’s SimpleCeiver. FB.

Bruce KC1FSZ building 25 Watt amp for his Peppermint Bark rigs.  We won’t turn him in to the QRP authorities.

Grayson KJ7UM tested the 12BY7A from my DX-100 VFO.  It was in fact weak. Thanks Grayson.

Charles Smith KV4JT has some really interesting stuff on how to solid state tube gear.   Especially R-390s. https://soldersmoke.blogspot.com/2022/08/trigger-warning-solid-stating-old-tube.html

Gianfranco I0ZY Old friend from Rome.  Amplifier manufacturer.  FB.

Paul WA1MAC getting started again after long hiatus.

Vasily.. I mean Todd VE7BPO.  Always great tech info.  Thanks.

Mark WB8YMV building a superhet with a 455 kc IF.

I sent Farhan some comments on his Daylight Again video: He wrote back “I marvel at their stamina to watch an hour long video of a man talking with a funny accent!”  

500 WYKSYCDS IBEW Stickers Arrive in Europe! Order yours today! Free!

Lex PH2LB in the Netherlands has gone the extra kilometer for the IBEW.  When he saw the stickers that had been placed in New York City, he asked for the design.  I sent him the files that  Jesse N5JHH (designer of the stickers) had sent to me.  Very quickly, Lex had 500 of these stickers printed up and ready to go (see above).  His shack now serves as a veritable beachhead in Europe for the IBEW and the CBLA.  Thank you Les!   

Les has even set up an on-line order form for those who seek to assist in the noble campaign to spread the word about our cause: 

https://ph2lb.nl/webshop/sticker.php

Les is making the stickers available for free -- all you need to do is pay the postage. 

Please be sure to send us pictures of the stickers after they have been placed. 

And let's not forget that the quote on the sticker is from Pete Juliano, N6QW. 

Here is one that recently showed up in Blacksburg, Virginia (zoom in on the green utility box): 

And here is Lex's very interesting site, with his Knack Story:  https://www.ph2lb.nl/blog/index.php?page=history

SolderSmoke Podcast #202 Cover-Rig, SKN, Pete's Vector Boards, uBITX, K1BQT rig, MAIL

http://n6qw.blogspot.com/

SolderSmoke Podcast #202 is available: 

http://soldersmoke.com/soldersmoke202.mp3

13 Jan 2018

Opening music from Shel Silverstein and Dr. Hook and the Medicine Show.  

On the Cover of the Rolling Stone or  On the Cover of SPRAT magazine.

Travelogue and Weather Report

-- Bill's trip to the Dominican Republic.  SWL on the beach.  Return to the ice box.  

-- Dramatic events in California. 

-- Reading Chinese Sci Fi with lots of radio in it.  "The Three Body Problem" by Cixin Liu

Straight Key Night.  IN QRP MODE THANK YOU.  With nephew Jeffrey.  Annual event -- worked Jim W1PID  friend of Mike Rainey.  

Steve Murphy and Jeff Damm on QSO Today.  FB. 

Oh your rig is homebrew?  "It must be propagation." 

ER Reading about G3UUR

Hams avoiding 60 meters due to 100 watt limit.  SAD. 

Bill's Bench:    Continuing series on the Ceramic Discrete DC receiver.   Described  the oscillator and the AF amp.  Next we will do the Mixer.   The most interesting stage. Nephew John Henry and niece Helena visiting today. 

Pete's bench.  uBITX adventures.   

The K1BQT IC transceiver. 

The Vector Board building technique.  See http://n6qw.blogspot.com/

MAILBAG

Paul KA5WPL  Looking for project with his son.  Sawdust.  Thanks again  Steve Silverman.

Chris Waldrup OM PBJ thanks for the gift

Pete in contact with Sven Johnson

Chuck KE5HPY sent us picture of fashion model with boatanchors in background  Grayson recalled 73 magazine covers...

Pete WB9FLW        Bilateral  SBE-33 ad  "with inherent stability"  That's the best kind!

Bruce KK0S experimenting with AF amps for the DC receiver

John KE5ETX Attempting CBLA

A Very Cool Video with NanoVNA, FFT, LC circuits, W2AEW, CuriousMarc, Back-to-Back 1N4148s, and String-Powered Gyroscopes

Don't let the scary nuclear chemistry title put you off -- there is a LOT of very familiar homebrew stuff in this video.  You will feel right at home.  Many of the resonances take place in the ham bands.   The CBLA may have to get involved here. 

Thanks to Chuck WB9KZY for sending this. 

And check out Ben's video on is best projects from the last 10 years: 

https://www.youtube.com/watch?v=rLkVFjRyoDU

SolderSmoke Podcast #248 -- Back from the Summer -- Spurs and Filters, S-meters, 6BA6 mania, Shirtpocket rigs, MAILBAG

The PsssT Kit, coming soon from Mostly DIY RF

SolderSmoke Podcast #248 is available for download: 

Audio: http://soldersmoke.com/soldersmoke248.mp3

Video: (800) SolderSmoke Podcast #238 -- Spurs and Filters, S-meters, 6BA6 mania, Shirt-pocket rigs, Mailbag - YouTube

Travelogue:  Trip to the Dominican Republic 3-9 August.  Thinking about the M0NTV video on mixers...  

Solder Smoke Shack South is almost done.   I am thinking about workbenches, operating tables and antennas.  How high should an electronics workbench be?   Table height?  Or workbench (woodwork) height?  

My son and I went to see "Oppenheimer"  Trinity test scene very cool.  They wanted to see if the gadget would work! 

Is the SolderSmoke blog completely archived on the WayBack Machine?  Please check and let me know.  Thanks. 

Bill's Bench: 

-- I've been working a lot of DX with the homebrew rigs:  Indonesia, Australia, Japan, Hawaii.  Lots of fun.  15 meters has been especially good. But the rigs still need work: 

-- M0NTV's video got me to put TinySA to work.  I found that output from dual banders could be improved.  Spurs and harmonics. Yuck.  I need more TinySA -- ordered the TinySA Ultra. 

-- Allison KB1GMX helped a lot.  EB63A amp was unstable, especially on 10 meters.  Higher frequencies are harder!  Tightened up shielding, negative feedback, and bypassing.  This all helped, but I found that I needed to take the higher frequency LP filters out of the amplifier box.  W3NQN filters are better, with steeper skirts and better 2nd harmonic rejections. NanoVNA proving very useful. https://www.gqrp.com/Datasheet_W3NQN.pdf

-- Also worked on the Bandpass filters for these rigs.  Farhan's comments on skirts of different filter configurations.  Some are "LSB" filters (with steeper skirt at the highest freq) and some are "USB" filters (with the steeper skirt at the lower frequency)  See diagrams on the blog page. So I built USB new filters for 12 meters and for 10 meters. 

-- Danger that my unshielded wooden box rigs might be inviting feedback.  So I shielded the 1510 rig with copper guitar amp tape (conductive adhesive).  Good stuff.  

-- Phase Noise rears its ugly head again.  See blog posts. 

----------------------

SHAMELESS COMMERCE DIVISION:  

Mostly DIY RF getting ready to release PsssT kits.  Target date:  December 18, 2023 (E Howard Armstrong's birthday).  https://mostlydiyrf.com/

Amazon Search box seems to have died.  I can't get it back.  Can anyone tell me what happened?  (There seems to be "explanations" from Amazon about this, but they are written in a strange language that I cannot follow.)  Something similar happened with the Google Ads on this blog page.  Apparently you can't have ads both on YouTube and blogger.  

But hey, there is Patreon for those who want to support the podcast and blog. 

-------------------------

Pete's Bench

An S-meter for Bill? 

6BA6 Mania! 

QRP SSB with 6BA6

Shirtpocket rig re-build

Mailbag: 

Walter KA4KXX has a great article about homebrewing in the September 2023 QCWA Journal.  

 Steve KC1QAY -- Has joined the CBLA.  I sent him a 3579 crystal.  He built a MMM and experienced JOO.  And Allison KB1GMX is in his local radio club.  TRGHS. 

Ajay VU2TGG in Pune, India -- launching a high school receiver effort. 

Denny VU2DGR The Wizard of Kerala: https://soldersmoke.blogspot.com/2023/08/the-wizard-of-kerala-india-denny-vu2dgr.html

Joe VK4BYER working with kids a remote Australian community.  FB. 

Todd K7ZF -- Wants to get into homebrewing. Advised him to start small. 

Dean KK4DAS:  Fixing Hallicrafters Worldwide RX. Ciudad Trujillo!  Got question from Mark in the VWS Makers Group:  HOW DOES Michigan Mighty Mite REALLY Work.  See blog. 

Trevor Woods -- Info on Super Islander Mark IV made in Cuba from old CFL bulbs.  FB. 

Bob KD4EBM sent me some great stuff:  Sony SW receiver,  QCX Mini.  Made a CW contact with the QCX.  Felt virtuous -- it is going to the DR.  Thanks Bob. 

Peter KD2OMV:    One of the guys I worked with the ET-2 transceiver.  Great to hear from him. 

Armand WA1UQO   Richmond area radio museum? https://www.youtube.com/watch?v=BSCmljje1p8

Mike WN2A -- Sent me a great care package with lots of toroids.  A lifetime supply!  Thanks Mike!

Nate KA1MUQ got his Doug DeMaw receiver going after 38 years!  FB.  Been there, done that! 

Tony: G4WIF Liked Valveman video about Gerald Wells.  He visited him! https://soldersmoke.blogspot.com/2023/08/valveman-story-of-gerald-wells.html 

Dean KL7MA  Bill talked to him on 15 SSB.  He had worked Wes W7ZOI!  FB! 

The Return of Pete's Simple-ceiver Plus (and a possible analog option)

Winter is approaching ladies and gentlemen, and it is time to think about radio projects.   Bob N7SUR suggested a direct conversion receiver project.  I think this is a great idea.   As a kid, I had fallen victim to the idea that building receivers was "too hard" for radio amateurs. Not true!  DC receivers to the rescue!  Carry on with the DC revolution first launched by Wes W7ZOI in 1968.

Pete N6QW is providing guidance and tribal knowledge via his blog.  For those of you who want to join the ranks of those who have defied the conventional wisdom and have broken through the "receivers are too hard" barrier.  I say build yourself a DC receiver.  Build it from scratch.  Many of you already got your feet wet in homebrewing with the Michigan Mighty Mite project.  Now it is time to jump into a DC receiver project.  

You folks already know what kind of VFO Pete will prefer:  It will be an Si5351.  That's fine.   But I will try to keep the banner of discrete component analog ludite-ism flying high.  This morning I ordered a batch of 7.37 MHz ceramic resonators.  I hope to pull them down into a significant portion of the 40 meter phone band.  If this works, I will share the batch with anyone who wants to joining my Analog Army (remember the CBLA?).   Note (above) that Pete has magnanimously left open the possibility of using a non-digital VFO. What a guy!    

Check out Pete's project here: 

http://n6qw.blogspot.com/2017/08/a-new-line-of-transceivers-difx_19.html

SolderSmoke Podcast #189: Juliano Blue, FET Amp, Si5351 QSK, Bill LC VFO, QSOs

SolderSmoke Podcast #189 is available:

http://soldersmoke.com/soldersmoke189.mp3

Billy in Europe.  Bill in Virtual Reality. 

Great News:  Little Gonzalo is "all clear."  Thanks for the help.

BENCH REPORTS:
Pete paints the rigs blue. 
Pete's FET amplifier project with FET switching and key pad
Using an Si5351 for CW offset and QSK.

Bill working on VFO for a rig built around HRO dial and gear box.
HRO gears seem a bit loose.  What should I do?
The search for an Imperial Whitworth.
For variable caps, brass is better, but two bearings beats brass.

QSO REPORTS
Pete having fun with homebrew rigs.
Bill works K3MRK, WA3O, W4OP, W1VLF and N6ORS

MAILBAG:
Dallas CBLA
Conventional Current Flow Controversy
"I regret ever listening to your podcast!"
LCR recommendations

Gonzalo just turned TWO and is doing very well