Wonderful "QSO Today" Interview with Ian Keyser G3ROO

N2CQR and G3ROO

I knew it was going to be a good Sunday morning in the shack when I saw that Eric 4Z1UG had posted an interview with Ian Keyser G3ROO.   This wonderful interview brought back memories of my visit to G3ROO's amazing facility in Dover.  (Thanks to Tony Fishpool who brought me out there.)

In this interview, you will hear Ian state -- in a very nonchalant English way -- that he built his first receiver at age 8.  And I really loved the story of how Ian got his call sign.  FB Ian.  

Ian is a very prominent member of the G-QRP club.  I was oddly relieved to learn that he is working on a LEGAL LIMIT LINEAR AMPLIFIER.  I hope he has special dispensation from Rev. George Dobbs.  I intend to cite this project if we ever have to defend Pete Juliano from charges of QROism.

Listen to the interview here:

http://www.qsotoday.com/podcasts/g3roo

That is a key designed for use aboard a hydrogen balloon.  This is the kind of thing that Ian has in his shack.

 

This is Ian's variometer -- mentioned in the interview.

That's me using one of  Ian's spy sets. 

Ian's antenna book:

http://www.lulu.com/shop/ian-keyser/practical-and-tested-aerial-systems/paperback/product-10904725.html

Here are the SolderSmoke Daily News posts about Ian and the Dover Construction Club:

http://soldersmoke.blogspot.com/search?q=Dover

Ian Keyser G3ROO on UK TV with his Spy Set Rigs (video)

Me at the keyof one of Ian's spy sets -- ten years ago?

Check out this nice UK TV report on Ian G3ROO and his spy set radios: 

https://www.itv.com/news/meridian/2018-10-19/daring-spies-who-broadcast-from-behind-enemy-lines/

And here is Tony Fishpool's report on their excellent adventure at Friedricshaffen Hamfest 2018. 

http://www.fishpool.org.uk/friedrichshafen.htm

Here are some of the SolderSmoke blog posts on the activities of Ian and the Dover Constructors Club. 

https://soldersmoke.blogspot.com/search?q=G3ROO

Ian Keyser G3ROO and Spy Radios

Above is a recent ICQ podcast interview with Ian. 

Here is a slightly older interview with Ian: https://www.itv.com/news/meridian/2018-10-19/daring-spies-who-broadcast-from-behind-enemy-lines

This sojoun into spy land started with this WTF video: https://www.youtube.com/watch?v=4f3ZJYdmpZw

Crypto Museum explains what the Mk 301 was all about:  https://www.cryptomuseum.com/spy/mk301/index.htm

 I have had Ian on the SolderSmoke blog several times: https://soldersmoke.blogspot.com/search?q=%22Ian+Keyser%22

N2CQR at the key with a G3ROO paraset

G3ROO's AMAZING Antenna Book

A few years back Ian Keyser, G3ROO, put together a really wonderful antenna book. It is very "down to earth," very practical, very useful for hams seeking to succeed with homebrew antennas. The book was edited by another great person from G-QRP Club -- Tony Fishpool, G4WIF. It has been out of print, but Ian has just made it available through Lulu.com.

Lulu is the printer who also handles my book: "SolderSmoke -- Global Adventures in Wireless Electronics." This means that you can order both books at the same time, perhaps saving on shipping costs. (But remember, for U.S., buyers shipping is free all summer long. ) And there is a 10 percent off sale for all buyers during the month of May (Coupon Code: FLOWERS).

Check out Ian's book here:
http://www.lulu.com/product/paperback/practical-and-tested-aerial-systems/10904725

For more info on the SolderSmoke book, go here:
http://soldersmoke.com/book.htm

Big Lulu Sale this Weekend: Save 20%

When you go to Lulu, don't just buy "SolderSmoke -- Global Adventures in Wireless Electronics" but check out these other fine Knack-related publications:

http://stores.lulu.com/6sj7comics ("Lid, Kid, Space Cadet" "Sky Buddies" by Jeff K1NSS
http://stores.lulu.com/ian_g3roo (Ian, G3ROO's amazing antenna book)
http://www.lulu.com/copperwood ("Carl and Jerry" books -- scroll down a bit)
http://stores.lulu.com/soldersmoke (SolderSmoke and Bill's other book -- the other one is available in .pdf)

Put them all together in one package to save shipping. Help your wife with the Christmas shopping! Use the coupon code DONE and save 20%

Summer Reading: Lulu Sale -- Save 20%

Time to stock up on summer reading. Lulu is running a 20% off sale through June 13. Use coupon code TOP305 to save 20%.

"SolderSmoke -- Global Adventures in Wireless Electronics" http://soldersmoke.com/book.htm

Don't just buy "SolderSmoke -- Global Adventures in Wireless Electronics"
check out these other fine Knack-related publications:

http://stores.lulu.com/6sj7comics ("Lid, Kid, Space Cadet" "Sky Buddies" by Jeff K1NSS

http://stores.lulu.com/ian_g3roo (Ian, G3ROO's amazing antenna book)

http://www.lulu.com/copperwood ("Carl and Jerry" books -- scroll down a bit)

http://stores.lulu.com/soldersmoke (SolderSmoke and Bill's other book)

SolderSmoke Podcast #236 -- Bill's 17-12 Rig, Pea Shooter, VFO Wisdom, Temp Compensation, Need Code for Max2870, Making Enclosures, MAILBAG

ARC-5 R-23 Nav Receiver Parts

SolderSmoke Podcast #236 is available!

http://soldersmoke.com/soldersmoke236.mp3

Winterfest!  Many Boatanchors.  Lots of old good analog test gear.  Talk with Dean KK4DAS.  Met up with Armand WA1UQO and Charles AI4OT. 

Pete's Bench: 

-- Looking for help in software development for MAX2870 board.  

-- Tapped Capacitance Impedance Matching

-- The Pea Shooter (See N2USD's version in videos

 below).

-- Tribal Knowledge on Making Enclosures

Bill's Bench: 

-- 17-12 Band Imaging SSB Transceiver.  It works on both bands. 

-- Plan for Glowing Numerals (N6QW has been there and done that!)

-- WU2D's videos on VFOs.  

-- Temperature Compensation:  HT-37 capacitor.  FT-101 VFO,  even in the ARC-5 receiver! 

-- Trying to get more rigorous about receiver design.  Gain distribution, IMD, Dynamic Range, etc. 

-- Do I need a true RMS audio voltmeter?  Or can I get the same info from freeware audio spectrum analyzer and soundcard?

-- 6EA8s replace 6U8s in MMRX 

SHAMELESS COMMERCE DIVISION:   We have a sponsor!  

PARTS CANDY out of Chicago produces quality test leads for your bench.  The guy who runs the company is Carlos, and he is one of us.  He is an electronic tinkerer. See the ad on the left hand column of the SolderSmoke blog.  Just click on the picture of the test leads and you will be taken to Carlos's ebay store.  Go for it. 

Mailbag

Walter KA4KXX in Orlando -- Diodes in BITX Bilats -- Why?  Farhan says To prevent reverse junction of off transistor from conducting and clipping waveform. 

Tony G4WIF -- Audio test gear and G3ROO paraset

Todd K7TFC Pine boards, TIAs and 12 meters

Dean KK4DAS  Ceramic Variable Oscillators on 40.   Juliano Criteria? 

Mike WU2D   VFOs and Temp compensation. ARC-5s

Chris KD4PBJ   A really nice parts care package -- Thanks Chris! 

Steve M0ECS.  Inspired by SS, moved something off the Shelf or Box of Shame. 

Jason KD2RKN Building a DC receiver.  It is all our fault. 

Chris Mannon in Indiana joining the CBLA

KC4GMH is listening! 

Ed N2XDD has been armed with a 3.579 MHz crystal.  

Harvey Wa3EIB working on his museum 

Tim AG4RZ is BACK IN THE SOLDERSMOKE! 

Fred KC5RT -- an old friend -- recommends Bangood RF sig gen for 88 bucks. 

Shlomo 4X4LF listening and homebrewing from a Kibbutz in Israel. 

Chuck KF8TI was a Peace Corps Volunteer in the Philippines. 

Ham Stuff at Lulu (with 10% off)

Here's an idea for making maximum use of your heard earned dollars or euros or whatever: When you go to Lulu, don't just buy "SolderSmoke -- Global Adventures in Wireless Electronics"
but check out these other fine Knack-related publications:

http://stores.lulu.com/6sj7comics ("Lid, Kid, Space Cadet" "Sky Buddies" by Jeff K1NSS

http://stores.lulu.com/ian_g3roo (Ian, G3ROO's amazing antenna book)

http://www.lulu.com/copperwood ("Carl and Jerry" books -- scroll down a bit)

http://stores.lulu.com/soldersmoke (SolderSmoke and Bill's other book)

Put them all together in one package to save shipping. Help your wife with the Christmas shopping!

Then use the checkout password TURKEY to save 10% (through November only)

Cyber Monday Sale for SolderSmoke!

Knock 25% off your Lulu purchases. Tomorrow only.

Don't just buy "SolderSmoke -- Global Adventures in Wireless Electronics"
but check out these other fine Knack-related publications:

http://stores.lulu.com/6sj7comics ("Lid, Kid, Space Cadet" "Sky Buddies" by Jeff K1NSS

http://stores.lulu.com/ian_g3roo (Ian, G3ROO's amazing antenna book)

http://www.lulu.com/copperwood ("Carl and Jerry" books -- scroll down a bit)

http://stores.lulu.com/soldersmoke (SolderSmoke and Bill's other book)

Dover update: Falling from tree, B2 inheritance?, HB variometer

That's me (the new boy in the workshop) at the key of Ian G3ROO's B2 spy set. Beautiful rig. You will all, I'm sure, understand Nigel M0NDE's question to Ian (see below). The Dover variometer project is very interesting (picture at the bottom). Thanks Nigel! (Try to keep Ian at ground level, OK?)

Hi Bill, a Dover construction club update:

Ian was cutting down some trees in the garden this weekend, and took a tumble. As he fell I asked him if I could be left the B2, I can't tell you exactly what he said but you can imagine. Fortunately he was not injured as the ground was soft with all the rain we have had. The B2 remains in the museum for now.

The black hole has taken the variometer from us forever so a new one was made Thursday night at club. You got the blame tonight for anything that was not in its proper place when sought, the new boy in the workshop always takes the blame!

A length of plastic drain pipe was selected. A coil of about ten turns was wound around a large capacitor as a former and tied off with beeswaxed rafia then mounted onto a plastic rod. The plastic rod had a hacksaw slot put in it lengthwise to facilitate the copper wire exiting the plastic pipe. The plastic pipe was drilled and squeezed and the coil inserted into the pipe. The rod was held in place by friction fit brass washers. Two coils were wound around the plastic pipe,in similar directions. The wire is just tensioned by being passed though holes and threaded in and out of the pipe at each end. A plastic screw allows the inner coil to move through just 180 degrees. The first test showed two inductance ranges were possible 6-12 micro Henries and 12 to 21 mH. We will add additional coils up the pipe to give 21 to 30, 30 to 40 etc. A ten meter fishing rod will form the vertical element, with this variometer and switched coils providing the tuning. The experiment continues next Thursday night.

73 de Nigel Evans M0NDE QTH Dover

Free Shipping on SolderSmoke -- The Book

Use Coupon Code Ground 305 and get free shipping on "SolderSmoke -- Global Adventures in Wireless Electronics" http://soldersmoke.com/book.htm

Don't just buy "SolderSmoke -- Global Adventures in Wireless Electronics"
but check out these other fine Knack-related publications:

http://stores.lulu.com/6sj7comics ("Lid, Kid, Space Cadet" "Sky Buddies" by Jeff K1NSS

http://stores.lulu.com/ian_g3roo (Ian, G3ROO's amazing antenna book)

http://www.lulu.com/copperwood ("Carl and Jerry" books -- scroll down a bit)

http://stores.lulu.com/soldersmoke (SolderSmoke and Bill's other book)

Spy Rigs, Para Sets, Bugs, and Enigma Machines -- Dr. Tom Perera W1TP (video)

This is a really amazing presentation by Tom Perera W1TP to the Fairlawn (NJ) Amateur Radio Club. 

There is so much great info in this presentation.  Some of the highlights for me: 

-- The U.S. Civil War telegraphic (wired) spy set was just mind blowing.  I had never heard of this.  

-- The way the Nazis transmitted a signal 1 kc off the BBC frequency, so that Germans who tuned their Nazi-issued receivers to the BBC could be detected by neighbors (from the resulting 1 kc tone!) and turned in to the Gestapo.  

-- "Things don't land gently when dropped by parachute." Indeed.  This was a reminder of the courage of the young women who parachuted into Nazi-held territory during WWII.  Like Paulette.  It was great to see her with her Paratrooper wings on.  AIRBORNE!  And the picture of the operator with the bicycle generator was of Virginia Hall.  See: https://www.npr.org/2019/04/18/711356336/a-woman-of-no-importance-finally-gets-her-due  That portrait hangs in the hallway of the National War College. 

-- How they put the schematic of the PRC-5 right into the box.  Great idea.  But it had a terrible receiver.  One of the schematics showed a 455 kc IF and a BFO.  So they sent in superhets, not just regens. 

N2CQR operating the Para Set of G3ROO around 2009

This video makes me want to build a Para Set. 

Thanks a lot to Tom W1TP and the Fairlawn ARC. 

Report from Dover Construction Club

GM Bill,

Dover Construction Club lads all send their regards! We're still gong strong but summer is always a bit slack.

Young Neil has built himself a HUNTER SDR receiver, the rest of us are involved on projects but often chin wagging takes preference and little gets done..... Merv is the big offender of course, not me!

I'm working on a big linear for my 160m winter fun.... using a Russian triode.... of course it will loaf along at 400W, our legal limit.

Nigel is now the other side of the country but he's still involved and considers himself an active member. Building like mad but still not doing the important thing of bashing on with his Morse. He's getting better and that was proved last night.

Peter came round with his new KX3 and we put it on the air..... We worked Nigel and he insisted that he did not use his morse reader..... I could be ingratious and say there may have been a little 'porky pie' (lie, sorry, London cockney slang!) It might have been running on the side of the bench but he didn't look at it!

I have a KX3 on order and expect that in the next few weeks..... I've gone for the kit.

While on holiday my ic 7200 burst into flames..... well, filled the house with smoke! The PSU had gone to 22v and the PA board did not like it. It's a real mess inside but surprisingly enough there are few internal problems.... a few charred caps on various boards and one 9v reg giving 8volts but the Rx still works!

The Tx works up to the PA board as well! It was insured and they have paid up so I might order a new PA board and keep that in the workshop as the rig down there.

I've started to downsize as well.... I have far too much gear.... I've got 160 Morse keys for a start and use four of them!

Sorry, in rabbit mode..... 73 for now

Ian, G3ROO and GB2SPY (oh, and KG3ROO and G0ROO).... and DCC lads

Our book: "SolderSmoke -- Global Adventures in Wireless Electronics"http://soldersmoke.com/book.htmOur coffee mugs, T-Shirts, bumper stickers: http://www.cafepress.com/SolderSmokeOur Book Store: http://astore.amazon.com/contracross-20

SolderSmoke Podcast #243 -- HI7/N2CQR, uBITX mods for 10 meters, High-School Direct Conversion Receiver Project Launched (Success!) Mailbag

 

DC RX and one of the PTO boards we built as demos last night. 

February 10, 2023

SolderSmoke Podcast #224 is available. 

http://soldersmoke.com/soldersmoke243.mp3

Video here: (32) SolderSmoke Podcast 243 (video) Hi7/N2CQR, uBITX, Success with High School Receiver Project - YouTube

Pete N6QW had technical difficulties this morning.  He insisted that the show must go on.  Pete will be back for the next episode. 

 

Travelogue: 

Bill in the Dominican Republic for all of January.  

HI7/N2CQR  Eastern tip of the island. uBITX and dipoles. 

20, 17, 10.  CW and SSB.  SSB was tough and I had reports of RF getting into the signal.

Went to CW. 

Worked VWS Mike KA4CDN, and Walter KA4KXX on 20CW.

Finally moved up to 10 CW.  Lots of contacts. Even though uBITX very QRP on ten.

I am modifying the uBITX now.  

Copper tape shielding to keep RF out.

 Low power out not the fault of the IRF-510s.  The problem is the 2N3904s.

Will replace with 2N2222 in To-18 cans.

Dean KK4DAS putting KD8CEC software into Arduino.  I gave up.

Who sent me this orphan uBITX?

SolderSmoke Shack South in final phase of construction.

 

SHAMELESS COMMERCE DIVISION:

Patreon!

Bezos Shopping!

 

DC Receiver Project

Local High School radio club. 

Simple:  Like Herring Aid 5 and Wes’s original.

Farhan’s four stages:

BP Filter, Diode Ring, PTO, AF amp. 

Simple Colpitts PTO SURPRISINGLY STABLE.

Simple and easy.  No chips.  No complicated circuits.

Guys have helped test out the design:  Rick N3FJZ, Walter KA4KXX,

Daniel VE5DLD, Stephen VK2BLQ and others. 

First session last night:  We demonstrated build of the PTOs.  

They worked (thank God).

 

Open Circuits book.

Envelope Detection Controversy

Save the Antenna – Book “Losing the Nobel Prize” K1JT

 

MAILBAG

--Dean KK4DAS 10 meter DSB!  Tiny SA ULTRA! FB

--John AC2RL on Elmer W3PHL DSB guy

--AC3K reports inventor of Fender Stratocaster guitar was a ham: W6DOE

--AF8E was doing POTA.  I worked him. He said my rig had presence. FB

--Alain F4IET FB DSB rig with mic in Cigar can!

--Daryl N0DP worked him on SSB.  He is homebrewing

--Steve N8NM was in for repairs but is on the mend.

--Rick G6AKG working with sub-harmonic mixers and logic chips

--Paul HS0ZLQ Built DC receiver but looking for something else to build. No DSB!

--Steve AB4I – Coherer, Jagadish Chandra Bose, and Marconi

--Eldon KC5U    Worked VK5QD right after me and mentioned SolderSmoke FB

--Todd K7TFC is building the DC RX.

--Tony G4WIF and Ian G3ROO using automotive relays for antenna switching. FB.

--Dave WA1LBP Great to hear from my fellow Hambassador (Okinawa)

Older post comments:

--Scott VO1DR was also in CF Rockey’s class! (Blog comment)

--Aurora Aug 4, 1972: Twelve people shared memories.  (Blog comment)

--Will WN1SLG Googled novice call and was led to my Novice log.(Blog comment)

Steve G0FUW talks Homebrew and Kits with Charlie NJ7V

Our homebrew direct-conversion receiver challenge (see below) has led to a discussion of the differences between homebrew and kits.  Our intent in designing this rig was to come up with something that was simple enough to actually homebrew (that is the challenge:  homebrew it!) .  Building it from a kit would be something different.  I like the way Charlie and Steve talk about the differences between homebrew and kits in this video.  Around 33:49 Charlie mentions that after a while you just get good at building kits.   Steve points out that building kits is a bit like "painting by numbers" (a great metaphor).  Steve then goes on to talk about the formation in G-QRP of the "scratch-built group." Steve tells us that he has built some 84 radios.  Steve talks about "the joy of building it yourself" (43:49)

Steve gives a very kind shout out to SolderSmoke at around 23:58.    The references to Tony G4WIF and Ian G3ROO were also very nice. And there are many great mentions of Pete Juliano N6QW. 

And remember:  If you are not a member of G-QRP you are just wrong!  Join here:  https://www.gqrp.com/join.htm 

Thanks Charlie and thanks Steve! 

------------------------------------

November 13, 2024

Bill's appearance on the Ham Radio Workbench.  (Bill made some overly harsh comments about radio rejuvenation, and was trying to make amends.)  But now we throw down the gauntlet.  WE CHALLENGE the HRWB guys to build -- to homebrew - our TJ DC RX.  They will experience JOO, JVO and the elite status that comes with having built their own ham radio receiver.  And if they go on to build a 10 minute transmitter, they can use it for CW contacts.  Like on POTA (Thomas!)

December 13, 2024: 

Bill was on Ham Radio Workbench: https://soldersmoke.blogspot.com/2024/11/bill-n2cqr-appears-as-guest-on-ham.html  Our challenge to HRWB.  Gauntlet thrown down... OUR CHALLENGE HAS BEEN GRACIOUSLY ACCEPTED!     We now extend the challenge to the entire SolderSmoke community: Build one of these:  https://hackaday.io/project/190327-high-schoolers-build-a-radio-receiver

Homebrewing is not for the faint of heart!  Accept the challenge!  Build stuff! 

SolderSmoke Podcast 185 -- SPECIAL FEBRUARY ANTENNA SHOW

SolderSmoke Podcast #185 is available

22 Feb 2016

http://soldersmoke.com/soldersmoke185.mp3

Travelogue:  550 feet above Washington DC

Bench reports
Pete:  Simpleceiver update.  Adventures in Raspberry Pi SDR.
Bill:  A daring but failed attempt at divide by 2 I&Q.
Audio Mods on the Hammarlund HQ-100.
Dual Digital Readout for the AM station.

SPECIAL FEBRUARY ANTENNA DISCUSSION
Why we build antennas in February.
Why hams should concentrate on antennas.
The importance of noodling.
Pete's beam project.
Pete's Lazy H.
The pernicious influence of automatic antenna tuners.
Bill's Ray Gun Antenna.
Bill's Moxon and his 160 inverted L.

MAILBAG
Tom Gallagher NY2RF (new ARRL Exec VP).
Mike Rainey AA1TJ on the air with a unijunction transistor.
Dale W9DKB sends me 160 meter book.
Alan Wolke W2AEW builds a Mighty Mite.
Daniel HK4DEI builds a DSB rig in Medellin.
Chris KD4PBJ modulates an AD9850.
Charlie ZL2CTM Builds a Teensy Superhet.
Jim W8NSA -- a Tek 465 goes toes up.
Thomas KK6AHT has roof, needs antenna!
Grayson TA2ZGE homebrewing crystal filters in Ankara.
Ian G3ROO and I had QRP QSO in 2001!
Steven G7VFy sent me a box of VALVES.
Frank KM4AXA repairs a rig and thus adds SOUL to the machine.

Video of SolderSmoke Podcast #236

SolderSmoke Podcast #236 is available!

Podcast Posted on 1 April 2022:

http://soldersmoke.com/soldersmoke236.mp3

Winterfest!  Many Boatanchors.  Lots of old good analog test gear.  Talk with Dean KK4DAS.  Met up with Armand WA1UQO and Charles AI4OT. 

Pete's Bench: 

-- Looking for help in software development for MAX2870 board.  

-- Tapped Capacitance Impedance Matching

-- The Pea Shooter (See N2USD's version in videos

 below).

-- Tribal Knowledge on Making Enclosures

Bill's Bench: 

-- 17-12 Band Imaging SSB Transceiver.  It works on both bands. 

-- Plan for Glowing Numerals (N6QW has been there and done that!)

-- WU2D's videos on VFOs.  

-- Temperature Compensation:  HT-37 capacitor.  FT-101 VFO,  even in the ARC-5 receiver! 

-- Trying to get more rigorous about receiver design.  Gain distribution, IMD, Dynamic Range, etc. 

-- Do I need a true RMS audio voltmeter?  Or can I get the same info from freeware audio spectrum analyzer and soundcard?

-- 6EA8s replace 6U8s in MMRX 

SHAMELESS COMMERCE DIVISION:   We have a sponsor!  

PARTS CANDY out of Chicago produces quality test leads for your bench.  The guy who runs the company is Carlos, and he is one of us.  He is an electronic tinkerer. See the ad on the left hand column of the SolderSmoke blog.  Just click on the picture of the test leads and you will be taken to Carlos's ebay store.  Go for it. 

Mailbag

Walter KA4KXX in Orlando -- Diodes in BITX Bilats -- Why?  Farhan says To prevent reverse junction of off transistor from conducting and clipping waveform. 

Tony G4WIF -- Audio test gear and G3ROO paraset

Todd K7TFC Pine boards, TIAs and 12 meters

Dean KK4DAS  Ceramic Variable Oscillators on 40.   Juliano Criteria? 

Mike WU2D   VFOs and Temp compensation. ARC-5s

Chris KD4PBJ   A really nice parts care package -- Thanks Chris! 

Steve M0ECS.  Inspired by SS, moved something off the Shelf or Box of Shame. 

Jason KD2RKN Building a DC receiver.  It is all our fault. 

Chris Mannon in Indiana joining the CBLA

KC4GMH is listening! 

Ed N2XDD has been armed with a 3.579 MHz crystal.  

Harvey Wa3EIB working on his museum 

Tim AG4RZ is BACK IN THE SOLDERSMOKE! 

Fred KC5RT -- an old friend -- recommends Bangood RF sig gen for 88 bucks. 

Shlomo 4X4LF listening and homebrewing from a Kibbutz in Israel. 

Chuck KF8TI was a Peace Corps Volunteer in the Philippines. 

SolderSmoke Podcast #193: BITX 40, OLEDs, KWM-4, Noise Abatement

SolderSmoke 193   28 Jan 2017

http://soldersmoke.com/soldersmoke193.mp3

Report from Pete on BITX 40 Session with California radio club.

Update on the BITX40 Module Revolution
-- Check out the BITXHACKS page.  Send in contributions.
-- BITX20 mailing list very active.
-- Raduino!
-- Interview with Farhan with W5KUB --   Eliminating the commercial gear.
-- BITX 40s on the beach in Australia.  FB

Bench Reports:

Pete:
-- Color Displays!
-- KWM-4
-- OLED MADNESS!

Bill: 
-- Fixing up the old HT-37   HT37 to HT37 QSO with W1ZB
-- Dabbling in VHF with Ramsey Aircraft band receiver.  NOT FUN.
-- Going all IC with Si5351 OLED NE602 rig.
-- BANDSWEEP
-- OLED Noise and the Active Decoupling solution.

Using LTSPICE as a diagnostic or understanding tool.

Of Waterfalls, Homebrew Rigs and Casual Critics on 40 meters. Words of Wisdom from W8JI.

LEXICON:  HAYWIRE   TOMBSTONE    BIKESHEDDING from Todd K7TFC

Some great recent interviews by Eric 4Z1UG:
Ian G3ROO  Origins of ROO   Regen at age 8
Hans Summers G0UPL     Balloons!   NO COMMECIAL GEAR
David White WN5Y          ELECTROLUMINESCENT  RECEIVER EXPLAINED
Rob Sherwood NC0B 

MAILBAG: 

Chris KD4PBJ's BITX 40 with improved stability
Jerry W0PWE built a DIGITIA!  Very nice.  Worked Keith N6ORS and heard me! TRGHS
Mike AB1YK's Al Fresco Scratch built BITX.  But give that LC VFO another chance Mike!
Steve N8NM 30 meter rig with salvaged CB LC VFO. FB
Keith N6ORS Franken SDR rig with parts from the 1980s.  FB
SKN Bandscan from Mike WA6ARA  I worked W1PID Jim!
What is Mikele up to?
Rocking Johannesburg and Kirghizstan via local repeaters:

 http://www.sarl.org. za/public/local/GoogleRepMap. asp?Lat=S%2026%2011%2008&Lon= E%2028%2008%2049

SolderSmoke Podcast #207 -- 15 mtrs, 60 mtrs, Giants of Radio, Cubesats, Pete's rigs, SDR MAILBAG

SolderSmoke Podcast #207 is available: 

http://soldersmoke.com/soldersmoke207.mp3

-- Giants of Radio
-- Pete on 15 Meters
-- Bill on 60 Meters with the uBITX
-- Pete's Sudden and Heath Filter Transceivers
-- Cubesats to orbit!  To the moon!  And to Mars! 
-- Bill rebuilds his 2 meter "Ray-Gun" Quad (for Farhan's Cubesat)
-- Homebrewing Variable caps and stockpiling NP0
-- My "by ear" Minimal Discernible Signal Technique
-- Thoughts on Direct Sampling SDR and the Radio Art
MAILBAG
-- A request for feedback from GQRP
-- G4WIF reports G3ROO on UK TV with spysets
-- VU3XVR builds FB rig from EMRFD
-- M0KOV Charter member of the 3 Scratch-built BITX club
--KD4PBJ's PTO Turtle DC Receiver
-- AB1OP builds Pete's LBS receiver and gives us a new acronym: SITB
-- KD4EBM -- Thanks for the scanner Bob!   
-- A possible sponsor from California... 

-- Pete's dream neighborhood...

SolderSmoke Podcast #122

Bill (N2CQR) and Ian (G3ROO) in Dover, England (with hydrogen balloon spark key)

SolderSmoke!
A SHOW FOR ELECTRONICS HOMEBREWERS!
Listen at: http://www.soldersmoke.com
SolderSmoke #122

Feb 28, 2010
Snow in Rome!
In London: A visit to Marconi's house, Maplins, and Faraday's lab
A visit to the Dover Construction Club
Computer problems resolved
A short period of QRSS, then back to WSPR
Putting the Drake 2-B into WSPR mode
The Rome-Norway WSPR pipeline
Increased solar activity
50 years of SETI with Frank Drake
QQ Review
Work Bench Eye Candy
Movie Review: UP! (Five Soldering Irons)
MAILBAG