Stop Me Before I Commit an Electronic Atrocity!

Sadly, not mine

I like the D-104 mic.  I bought one from Astatic shortly before they went under and it has provided good service with many different rigs for a long time.

I wanted another one, primarily for my DX-100/HQ-100 station.  I saw one on e-bay and a few days later it was here.  Unfortunately the seller was correct when they warned that it showed no output.  I had hoped it was a problem with the amp in the base, but no, it seems that the crystal element is quite dead.  It is an MC320 cartridge marked 7-77.  There is an aluminum sheet at the front that is apparently supposed to be riding atop a center support that connects mechanically with the magic crystals.  But it looks like a circular tent that has poked through the center support and collapsed around it.

Just a few years ago there were some options for replacement elements, but it seems that most of these are gone.  Bob Heil does have a dynamic element replacement kit for about 68 bucks. 

There are many schemes for putting electret elements in the old D-104 head...  I was reaching for the junk box but I stopped myself.  NO!  I will try not to commit this kind of electronic barbarity. (I have already sinned by killing several QF-1 Q multipliers and a couple of Benton Harbor lunch boxes.)  I will instead turn to the SolderSmoke brother/sisterhood and ask if anyone out there has a crystal element that could bring this old mic back to life.  My DX-100 deserves nothing less. 

Anyone have a D-104 crystal element in their junk box? 

Steve N8NM Gets Modular -- With Both Hardware and Software

Steve N8NM has an excellent article on his blog about the benefits of modularity.  He breaks new ground by extending the concept into the software realm.  Check it out:

https://n8nmsteve.blogspot.com/2017/07/sr-16-lets-get-modular.html 

Subscribe to Steve's blog, or link to it.  Hopefully this will encourage him to post more great things like this.

Another LM373 Rig - Pete Is Not Alone!

Bill,

Thanks for coming back to my call. It was a thrill to finally catch you on the air.Like I said my Soldersmoke marathon was amusing and kept me in great company on my round trip drive from Murphy NC to Chicago. While I was in Chicago I emptied my storage garage of goodies that have been there for 12 years, it was like Christmas in June. I uncovered treasures I didn't know I even had and yes I found the box of project boards that kind of or didn't work at all. I now have these treasures to play with and see with renewed eyes what I may have done wrong, or burned up. It looks like a few of these modules can be made into rigs.

I also found a couple of antennas that I traded for that never made it up.

Also the bigger surprise was how many parts I had kept especially the ICs that were intended to beused in rigs like the LM373's that Pete has talked about. I have one test circuit board to test the LM373 that just needed the oscillators so with my SI5351 breadboards I have what I need to get this going.

Now that I'm settled into my new QTH in the wilds of western NC I will noodling and tinkering moreto get my little DSB rig on the air and an LM373 based SSB rig too,  using mostly or all obsolete/vintage parts. This is something I have been noodling about for sometime now.

I also will get my MMM finished.

Thanks again for the QSO and I look forward to working you again. Now to melt some solder.

73,

Skip Davis. NC9O

---------------------------

Pete's LM373 page: http://www.n6qw.com/LM373.html

The Radio Laboratory at Bandung, Java -- SSB in 1927

Anton PA0AST alerted me to this important piece of radio history:

The first phone radio between Indonesia , the city of Bandung ( Dayeuh Kolot, Jalan Radio 1 ),  and Holland , Radio Kootwijk  were made  in SSB already in 1927... Before that time they had only a CW  1 Mega Watt spark transmitter in Malabar.
One of the receivers still exists in a museum in Amsterdam (cdvandt ). It is 3 meters in length and 2 meter in  height....  All made with plug-able units with 1 tube inside .

The transmitter was 10 kW. Ua was 6kV was made by dynamotors. Transmitting Tubes locally made by craftsman in a workshop.  Both  buildings as well  in Bandung and in Kootwijk still exists .

Anton

The old images come from:
http://www.cdvandt.org/bandung-lab-kwk.htm

At the other end was Radio Kootwijk in Holland. 

Before you jump to the English version of the page, be sure to check out the Drone video of the site, and the audio file of the Morse transmissions: 

http://radiokootwijk.nu/     Thanks to PA0JWU for the wonderful site.

Quite an impressive shack!  My favorite part is the note indicating that local residents cleaned out the cooling pool and used it for swimming each summer.

AC9JQ's Mini Digi VFO/BFO Al Fresco with OLED (and noise test)

From Dean AC9JQ:

Just completed the VFO/BFO/Arduino/OLED module for my radio.  I also have the LPF, BPF and crystal filters completed and tested.  Next will be the audio amplifier and NE602 modules.  I will probably build one of the NE602 modules and test things out as a DC receiver.  My ultimate plan is to have the rig no more that 1"x3.5"x3".  I still have a lot of "stuff" to stuff into that size of box.  I'll keep you posted.


I have been able to contain the entire Arduino/Si5351/OLED into a small cube in the front.  The rest of the radio has to fit on two levels in the rest of the area behind the Arduino/Si5351/OLED.  I think I will build the audio section and on NE602 mixer and run it as a direct conversion first to vet out any noise or other problems.  Bill, that small coax that you pointed out will really help on this build.  I used a small piece as a power feed-thru and will use it to feed out the VFO/BFO signals, thanks again for that pointer.

I decided to test for noise on the TIA transceiver test bed.  See the video of the results.  Not too much noise.  I'm only using my indoor magnetic loop for an antenna.  Video is kind of sloppy, but taking off the antenna and turning up the volume shows how little noise is left in the system.  Now time to stuff the rest of the radio into the tight quarters.

https://youtu.be/kXf7-7FtxEU

I purchased OLED from ebay.......

http://www.ebay.com/itm/401234789687?_trksid=p2057872.m2749.l2649&ssPageName=STRK%3AMEBIDX%3AIT

0.91'' 128x32 IIC I2C Blue OLED LCD Display DIY Module DC3.3V 5V For PIC Arduino | eBay www.ebay.com IIC interface. OLED display, no need backlight, self-illumination, the display performance is better than the traditional LCD display, also lower consumption. VCC: Power (DC 3.3 ~5v). Display Color:Blue. | eBay!

They are nice and compact, although as time goes on, I'm sure they will be harder to read.  I'm hoping to have an alfresco version in a week or two.  I used much of Pete's code from the shirt pocket transceiver upgrade, modified the code to address the smaller display and add USB/LSB capabilities. 

73's  Dean AC9JQ

G7WKE's Crystal Tester

Wow, this is an example of dedication to the cause.  I think many of us wimped out when confronted with the complex circuitry of the test device prescribed by DeMaw, but Rob G7WKE actually built the thing, and did a great job on it.  I'm tempted to suggest that Rob might want to set up a small business leasing this rig out to less dedicated filter builders.  Or perhaps he could have batches of crystals sent to him for DeMaw-ian analysis.

Hi Bill,

 

After listening to you and Pete discussing crystal filter design during SolderSmoke 197, I thought you might be interested in my latest project.

This is the Crystal Tester from January 1990 QST that is reprinted in W1FB's Design Notebook, which I believe is the circuit you and Pete were referring to.

It all appears to function as it should, so the next step is to sit down quietly with a pile of crystals and hopefully start along the road to a working filter!

73s

Rob G7WKE.

 

Smoke Test Failure!

This is why you need fuses!  And reverse polarity protection!  Yikes! 

The Workshop at AA8V

Field Day was a big success for me this year.  I was in category "1E" which meant that I was home in the air conditioning, but doing my bit for emergency service by using a gel cell as my power source.  A SOLAR CHARGED gel cell.  So don't anyone call me a slacker, OK?

I was on my HW-8 and made a total of two contacts.  The second was with AH6AX.  I wasn't fooled -- I knew they weren't in Hawaii.  But the op gave me his home call:  WB8YYY.  Curt is a SolderSmoke listener.  In a follow-up e-mail he alerted me to the web site of AA8V.   Great stuff.  Thanks Curt.

Here is the AA8V workshop:

http://faculty.frostburg.edu/phys/latta/ee/workshop/workshop.html#electronics1

AA8V was on the QSO Today podcast not long ago. 

FDIM: Bob Crane Interviews Ashhar Farhan VU2ESE

At Dayton,  Bob Crane interviewed our friend Farhan VU2ESE.  Farhan shared insights on the BITX, the Minima and future rigs. 

Farhan was inducted into the QRP Hall of Fame at this year's FDIM event.

You can listen to the interview here:

http://soldersmoke.com/FDIM17VU2ESE.mp3

Mod to Correct DESIGN ERROR in Heath HW-8

130k resistor inside heat shrink, across R-24

SPRAT 161 (Winter 2014/15) had a very intriguing article about the Heath HW-8 by Dave M0CEM.  Dave wrote about a possible design error in the active filter of the receiver.  The center frequency and gain shift significantly when you switch from "Wide" to "Narrow."   I was very interested because for many years I have noticed this problem in my own HW-8.  I just left it in "Wide" and never used the more narrow filter.  
 

Dave did some excellent circuit detective work and determined that the problem was R24.  He prescribed a change:  instead of 82k it should be 49.8k.  The placement of a 130k resistor across the 81k R24 would have the same effect.

Yesterday morning I installed Dave's mod.  I did as he suggested and put a 130k resistor across R24.  Brilliant!   What a difference!  In the past, I noticed a significant degradation in signal strength when I put the filter in the "Narrow"  position.  This doesn't happen now -- the response obviously does narrow, but the center freq stays the same.

It is really amazing to me that the Heath engineers made this error, and that it went uncorrected for so many years.  There have been many, many modification articles for the HW-8 over the years, but I haven't seen any that really address this problem. 

If anyone has more info on how this design error happened and why it went uncorrected for so long, please let me know.

Thanks to Dave and SPRAT for getting us back on the straight and narrow. 

Straight Key QRP Homebrew Adventures -- TRGHS

Last Saturday I put the Tuna Tin Two Top together with my Herring Aid Five 38 (year) Special and the Indian key that Farhan gave me.   I discovered that some of my 40 meter CW FT243 crystals had disappeared into the entropy of the shack.  But I was able to find one for 7050 kHz. That was a bit of good luck because it turns out that 7050 is the frequency of a congenial group of operators known as the Straight Key Century Club.  I felt right at home.  I have been inducted.  My SKCC number is 17272.  Very QRP, don't you think?   It is almost a Vanity SKCC.  Clearly, TRGHS.

I have been having excellent luck with this 7 transistor rig.  I have had one contact each day since I put it on the air, all of them in response to my CQ calls.  I've worked:

K1PUG Hank in Connecticut (twice)
W8HOG  Jerry in Ohio
WA4GQG Kevin in North Carolina
WA2AAW Frank in New York
KM4FO Dwight in Kentucky

This morning I added a little piezo buzzer for sidetone.  I am thinking of adding a VFO to the Tuna Tin.

The Possible Inspirations behind "Juliano Blue"

Close in color don't you think?  Dave Ishmael WA6VVL noted the NC-270 receiver's color was "Cosmic Blue."  Indeed, National noted the unusual color ("outstandingly different") in its advertising.  This now-rare receiver was produced between 1960 and 1964, so it could have influenced Pete.  Of course, the CK-722's color could also have played a role...   

BTW, shouldn't we ask Pete to get out his guitar and give us some "Juliano Blues"?  We need some music to go with the paint.