"The All Japanese 6" Receiver

One of the great things about having a "miscellaneous" box in an otherwise well-ordered junk collection is that rummaging through that box will often send you off on fun and interesting radio adventures.  I was rummaging yesterday and I came across the guts of the little AM radio that used to be mounted on my bicycle handle bars.  I last mentioned this in 2011 : 

http://soldersmoke.blogspot.com/2011/08/bike-radio.html

I was just about to cannibalize this board.  The IF transformers were almost certainly at 455 kc and I could use a few of those.  But then I started thinking and Googling and trying to figure out the circuit.  That all led me this the site that provided the diagram below: 

http://www.angelfire.com/planet/funwithtransistors/Book_TS_CHAP-7.html

Six transistors, four transformer cans, two audio transformers.  Yea, that's pretty close to what I was seeing on my board.  So of course I had to see if I could get it going.   I hooked up a 9V battery.  I connected the pot wiper connection directly to the connection at the top of where the pot had been (it had disintegrated).  It works!  It is inhaling nearby WFAX, Falls Church, Virginia. 

You will notice that the transistors in the circuit above are PNP.  I had assumed negative ground and had hooked the battery up accordingly.  No smoke was released and the thing worked, so I guessed that I had assumed NPN correctly.  Sure enough, perhaps aware of the PNP ancestry, the manufacturer had marked my board "BC123 NPN"! 

The author of the book I linked to above dubbed this circuit the "All Japanese 6"  -- an obvious allusion to the All American 5.  

I see real potential in these AJ6s.   A few mods to the front end and you could be shortwave listening, perhaps on 31 meters!   

BTW:  The space on my handlebars formerly occupied by that little AM radio is now taken up by a Bluetooth speaker that plays tunes streamed to my I-phone from Pandora as I make my way down the same old Washington and Old Dominion bike path.  Progress. 

A Swedish Homebrew uBITX built in Dubai

It was great to get an update from Martin.  He has moved his workshop from Dubai back to Sweden.  We have seen lots of homebrew BITX monobanders, but very few homebrew multiband uBITXs.  Check out Martin's.  Very FB.   The input from Farhan was very cool, as was Martin's wise decision to follow Farhan's suggestion and to pause construction once the receiver was working.  As Martin put it, "I halted the build for a couple of days and just enjoyed listening."  Thanks for the update Martin. 

Dear Bill and Pete,

Here comes a long overdue update from my workbench, my last update was back in March 2017 when I had completed my first transceiver project.

http://soldersmoke.blogspot.com/2017/03/fb-ibew-hb-dc-cw-de-uae-a65dcs.html

I did not stop building and quite soon after I completed the CW transceiver Farhan posted the first schematics of the uBitx, why not? Why not get into a multiband CW-SSB transceiver as my next project.

After completing the receive part I was amazed... 

I halted the build for a couple of days and just enjoyed listening.

When it was time to start on the filters and the main RF Amp I sent Farhan an email asking about the way forward, he responded like this on May 17th 2017

"martin,

first, let me congratulate you, i suppose you are the first one to build a ubitx after me! second, i am not happy at all with the transmit line up, the drivers were not doing a good job above 14 mhz. i have replaced the 2n2219s with parallel 2n3904s. i also had to add two more LPFs, for proper harmonic suppression. i am headed for dayton today. once in dayton, i will try to find time to send you the latest circuit diagram. 

once again, congratulations on a wonderfully constructed ubitx."

Wow, what a shot in the arm for a fairly new home brewer!!! I was now back full speed with solder melting. I completed the filter bank and the RF amp, this is where I am starting to move away from the published diagram, I believe it is good to make it your own a little.

The end result was great, I worked many many stations in Europe and Asia with this little machine both SSB and CW.

In 2019 we decided to move back to Europe, the workbench and all boxes with parts and junk together with the rest of the household found their way into a 40ft container and was sent of to Sweden.

The A65DC Laboratories became SM0P Laboratories, the iron is still always hot and there is something brewing here all the time.

Thanks for a brilliant show boys,

Martin SM0P

Q-31 Receiver Filter Fix with the NanoVNA

The picture above shows my problem. As predicted by the Murata data sheet and as warned by R.A. Penfold, that nice 455 kc ceramic filter has a significant response at around 640 kc.   This caused me to hear Brother Stair twice as often as I should have.  Clearly a spur exorcism was called for. 

Click on the picture for a better image.  As noted last time, my first idea was to build a series 640 kc trap LC circuit and put it ahead of the ceramic filter.  But I had trouble getting the desired high Q.  So I then thought about putting a wider 455 kc filter ahead of my 12 kc filter.  I would, of course, need one that did NOT have the 640 kc spur.  I found a 455B filter in my junk box.  I used the NanoVNA to look at its response.  No spur at 640 kc!  Yea!  

Next I put the two filters together, 455B first, then the 12 kc filter.  Success!  You can see on the NanoVNA that there is no spur at 640 kc. 

With close to the desired termination impedances, the passband at 455 kc looked pretty good.  I just put 1500 ohm resistors in series at the input and output of the dual filter combo. 

It worked.  Spur exorcised!  I no longer hear each SW broadcast stations at two spots on my dial.  

100 Years Ago: Hugo Gernsback on "An Amazing Art"

I like the art work in the header.  I like the reference to "the radio art."  I like that he refers in the first half of the piece to "the radio tribe" -- that would be us!  And this reminds me of "tribal knowledge."  He also talks about rigs "scattered across the table" -- Al Fresco!  

In the second half of the piece he veers off into a kind of weird call for standardization and ladies hats.   But the first half is good, and it is interesting to take a look at the hobby 100 years ago.  Click on the image for an easier read. 

The Ceramic Spurs (not a rock group)

Paul Taylor VK3HN's magnificent AM receiver was the inspiration for my Quarantine-31 Shortwave Broadcast receiver.  Like Paul I decided to make use of ceramic filters at 455 kHz for selectivity.  I started with the +/- 3 kHz filters that Paul used, but I found them kind of narrow for SW listening.  So I went with some wider ceramic filters that Bruce KK0S had sent me.  But I misread the specs that Bruce sent.  I thought they were 10 kHz wide filters. I realized later that they were +/- 10 kHz -- really twice as wide as I needed.  So I went back to Mini-Kits in Australia and got some +/- 6 kHz filters.  12 kc wide should be just about right, I thought. 

The bandwidth was right, but I started noticing a problem:  I could hear strong SW broadcast stations at two places on my dial.  This brought to mind an admonition from R.A Penfold, author of "Short Wave Superhet Receiver Construction" (1991 Babani Publications).   He advised keeping a few standard 455 kc IF cans in the circuit because, he warned, the ceramic filters have spurious responses, spurs that the IF cans can help knock down.  

Penfold was right.  Look at the filter response curve on the right (above).  There is a nasty spur at around 640 kHz.   This was the cause of my problem. Here is why: 

Suppose I was tuning Radio Marti's big signal on 9805 kc.  My VFO would be running at 9350 kc. 

9805-9350=455.  Great, but... 

With that spur at 640 kc, I could tune down to 9620 kc on my dial.  My VFO would be running at 9165 kc. 

9805-9165=640.  Bad.   That 640 kc difference product would make it through to my detector and AF amp.  I'd have Radio Marti showing up in two places.  I didn't like this. 

I thought about putting a series LC circuit tuned to 640 kc at the output of the ceramic filter.  This looked like a possible solution, but on the bench it looked like I would have trouble getting a circuit of sufficiently high Q.  

So rummaging around in my junk box I found an old Murata CFM455B filter.  This filter is quite broad, but it does not have the spur at 640 kc.  I could use it as a kind of roofing filter just ahead of the +/- 6 kHz filter.  Putting it there would allow me to avoid having to build additional matching circuits for the 455B filter.  

+/-6kc filter upper left,  455B wide filter to the lover right. 

I'm happy to report that this fix works.   The 6 kc filter provides the needed selectivity, and the broader 455B filter knocks down the 640 kc spur. 

Beware the Ceramic Spurs!  

Q-31 with can for first IF amps and filters open

A Backyard Pandemic Field Day in France (Smoke Released!)

Thank you Alain! 

-------------

Hello Pete and Bill,

As you know I am a great fan of your blogs. The fields days are not usual here but because our both countries have been hard hit by the Covid I felt good to participate in this kind of (solo) activity.

My wife Patricia shot 2 pictures for you.

I did some QSO with my callsign followed by FD, but in my enthusiasm I pushed a bit the pressure on my small TX and the PA Mosfet went promptly to the sky...

As you will see, even my dog Guerlain (no callsign) participated...

Hope that you enjoyed a great FD.

Take care my friends.

73 Alain F4IET

SolderSmoke Patreon -- What We Will Do with the Money

Become a Patron! 

I mentioned our Patreon fund-raising effort in Podcast #223.  We immediately got a number of new sponsors.  Thanks!  We also got a question:  "Hey Bill, what are you going to do with all that money?" In the spirit of SolderSmoke full transparency, I will attempt to answer that inquiry right here and now: 

All funds will be used at the discretion of SolderSmoke management.  

Possible (likely) uses include: 

-- Buying air time on shortwave broadcast stations so that the SolderSmoke podcast can be transmitted over the airwaves. We dream of stealing listeners from Brother Stair.   

-- Computers.   From time to time we need to upgrade. This 486 machine is getting kind of rickety. 

-- Paying fees to our internet service providers and to the server that hosts our podcast. 

-- Contributing to worthy charitable causes, including the Color Burst Liberation Army (CBLA), and the Constructor Crusaders.  

-- Buying audio gear we use in the podcast like the really cool microphones that have DRAMATICALLY improved our audio.  No more baby-wipe pop filters for us! 

-- Legal fees to the law firm of Dewey, Cheatam and Howe to fend off law suits, many of which are related to our obstinate use of 60/40 solder, and to our occasional use of images that SOME PEOPLE find offensive.   We also need to pay legal fees to fight our long-contemplated expulsions from the QRP Hall of Fame (Pete is especially vulnerable here). 

-- Magazine subscriptions (to those few remaining publications that have not pissed us off ).  

-- Buying stuff we use in video production (cameras, tripods, lights etc.) 

-- Further development of the SolderSmoke 401k Retirement fund.  We currently invest in Drake 2-Bs, SSDRA books, Hallicrafters S-38Es, 3579 kc crystals, and other items sure to rise in value over time. 

-- Buying gear we will talk about on the podcast or in videos (like the NanoVNA).  

-- Parts.  Si5351s and Raspberry Pi's for Pete.  2N3904s and J-310s for Bill.  

-- A new effort to assist electronics manufacturers in China with product name selection.  "Mean Well" is just not a good name for a voltage regulator.  And "FeelTech" does not bring to mind a signal generator.   For a fee, we can help!  

-- Travel.  If this ever becomes possible again, we need to get to India to meet up with Farhan.  This will undoubtedly result in some awesome podcast/blog/video material.   We also contemplate trips to the UK, Italy, Australia, China and New Zealand.  But we still probably won't go to Dayton. 

-- Buying miscellaneous tools, test gear, books, solder, rosin etc. to be used in the podcast, the blog, and in video production. 

-- Buying stuff for carefully selected new homebrewers (people who will not sell the stuff we give them and then use the money to buy Baofengs). 

-- A new Baofeng buy-back program.  You know, like for assault rifles, but for VHF/UHF walkie-talkies instead. 

We seek your input!  What else should we do with the money?  

Become a Patron!

DK7IH Improves his Shirt-Pocket Transceiver

More great stuff from Peter DK7IH.   He recently made some improvements to his "Shirt-Pocket SSB Transceiver.  On his blog he explains why he made the changes.  Note the Si5351 that is in there now.  I liked the 1 cm square T/R unit that Peter wrapped in heat shrink tubing. He also provides a really nice description of how to do front panel labeling with a laser printer.

Here it is: https://radiotransmitter.wordpress.com/2020/06/28/re-engineering-my-1st-shirt-pocket-transceiver/

Thanks Peter!

SolderSmoke Podcast #223 Field Day, Club Talks, Patreon, NanoVNA, Farhan Video, SPRAT, BIG MAILBAG

SolderSmoke Podcast 223 is available: 

http://soldersmoke.com/soldersmoke223.mp3

27 June 2020

Quarantine Field Day!   

Ironically, THIS YEAR we are both participating

Pete's FD Plan, Bill's FD plan 

Talking to Clubs: 

Pete's talk to the Cedar Valley Iowa Club

Bill's talk to the Vienna Wireless Society

Pete's Bench

DDC SDR

Ideas from the Summer SPRAT

Mean Well Voltage Regulator

SHAMELESS COMMERCE DIVISION: PATREON.   SS is an  SV DELOS WANA-BE!

We got our very first Patreon Patron!  Jonathan Magee from the UK!  Upper Left on the blog.

Continue to use our site for your Amazon purchases. 

Bill's Bench

NanoVNA

Understanding L Networks

+/- 6kHz Ceramic filter for Q-31

Lobes, Nulls and WSPR

Miscellaneous: 

Farhan's feedback Amplifier Video

British Antarctic Broadcast heard (sort of)

MAILBAG:

Mauro VA6BRO liked the SolderSmoke book.  Thanks Mauro

Tryg in Galway Ireland is listening.  Hope to get you the signed books Tryg. 

Michael N4MJR suggested that I use N2 Corona Quarantine Radio as my phonetics.  I dunno... 

Ed DD5LP has been helping us get SS rebroadcast on a German SW broadcast station. Stay tuned! 

Rogier PA1ZZ in California sent an e-mail about the Don Lee Broadcast System.  Thanks Rogier!

Rick KE3IJ  Silver Skirt on his 2B also. W3GOO did it.  Rick traded his Commodore 64 for the 2B.  Yea! 

Walter KA4KXX has a simplified circuit for the MMM!  From UK

Peter VE1BZI thank us for the tribal knowledge.  Dipolo Crilolo

Peter VK2EMU Wee need someone to make the Constructor Crusader badge. 

Scott KA9P sent us the Amateur Wireless cover from 1934 with the Constructor Crusader thing. 

John GM4OOU Built lockdown rig.  we want pictures! 

Jerry KI4IO  His version of the Sproutie by AA7EE   FB 

Adam N0ZIB built a MMM

Wouter ZS1KE in South Africa -- comparing notes on Drake 2-Bs

Randall KD5RC wants to get started in HB. 

Pete Juliano's Presentation to the Cedar Valley, Iowa Amateur Radio Club (Slides)

Earlier this month Pete N6QW spoke via Zoom to the Cedar Valley,  Iowa Amateur Radio Club.  This was an especially appropriate venue for Pete, the creator of the KWM-4;  Cedar Rapids was the long-time home of Collins Radio.  Many of those in the club used to work for Collins. 

Here is Pete's PowerPoint presentation: http://soldersmoke.com/N6QWslides.pptx

Some notes on the event: 

For the Zoom connection, Peter used his Linux Mint computer. 

  

Pete mentioned that Gene Senti,  while tinkering in his basement,  developed the KWM-1.  One of the guys in the audience confirmed Pete's account, but added something: Collins employees could buy ham gear at a discount. Senti bought a brand new 75A4 receiver (commercial price in late 50s was about $900) and he modified it from being just a receiver into a transceiver.  Imagine taking a new radio and doing that!  But when he got it working,  Art Collins came over to his home to see the invention. The rest is history.

Pete got grilled a bit on why he was still using “analog’ front ends on his several SDR builds -- why not Direct Digital Conversion?   Pete says he may now try to build a DDC rig. 

There was also a lot of very nice feedback on the SS Podcasts – there were many regular listener’s in that group. 

You can see Pete's slides here:  

http://soldersmoke.com/N6QWslides.pptx

Arduino, Si5351, GPS linked atomic clock, GPS disciplined frequency counter and more...

Wow, it has been a while since I first talked to Rick, N3FJZ.  Above you can see his QSL card.  And here is a link to a SolderSmoke blog post (with videos) that describes our Homebrew to Homebrew contact:

http://soldersmoke.blogspot.com/2015/10/hb2hb-n3fjz-n2cqr-si5351-and-bitx-tias.html

The e-mail below shows that Rick continues to melt solder, bringing into his rigs some very cool technology:  atomic clocks, GPS modules, and color displays.  That's a long way from the original PTO Direct Conversion receiver that he first heard me with.  FB Rick! 

--------------

Leif, 

I've made great progress on my Arduino Mega 2560 based rig controller I call the ZX-Front-Panel. I just finished a feature I always wanted which is a built-in *GPS disciplined frequency counter*. It uses the 1-pulse-per-second timing output from the GPS module to create a frequency counter with atomic-clock accuracy. It's on the solderless breadboard with the rest of the ZX-Front-Panel right now, and even so, it can count up to 30MHz with no trouble! and it should be able to count up to 100MHz or more if built on a ground plane with a little shielding. The best part about it is that it only required one additional chip (a 74LV8154 32-bit counter $1 from Mouser) in addition to the existing parts already on the ZX-Front-Panel; i.e. the Arduino Mega 2560 ($10), the Ublox NEO-6N GPS module ($15), the display ($25), and the Si5351 PLL RF Oscillator ($8). 

Check out my video series covering the ZX-Front-Panel development progress. The first link below will bring up the video page on my website with the latest video at the top, so you'll have to scroll down a bit to get to the earlier development stages. Check out the rest of the website too for the schematics of my Bitx / TIA inspired rig design (which I call the ZX-SSB-II) that I used an early version of to make my first HF HB2HB contact with Bill (N2CQR) back in 2014 or so (Bill and Pete, via the Soldersmoke podcast, were my inspiration to build my first SSB homebrew rig). 

YouTube videos: http://www.remmepark.com/circuit6040/ZX-SSB-II-Front-Panel/ZX-SSB-II-Front-Panel.html#video 

Homepage: http://www.remmepark.com/circuit6040/index.html

Dean AC9JQ and I have been communicating via emailing about his progress in building his own copy of the ZX-Front-Panel, and I'm very excited to learn that he might be thinking about producing a future homebrew rig featuring the ZX-Front-Panel as its controller/VFO. The best thing about the ZX_Front-Panel is that ounce you install the sketch into the Arduino Mega, you don't need to modify the Arduino sketch itself when you build your rig; i.e. the SSB crystal filter's center frequency (the I.F. frequency), the Si5351's clock output drive level, the display brightness and contrast, and the Si5351 crystal correction factor (crystal trim) are all configurable, real-time, right from the ZX-Front-Panel's user interface, and once set, can be saved to the Arduino's non-volatile EEPROM to be automatically loaded on the next power-up. Also, since it has a GPS module, it features a UTC/Local real-time clock with atomic clock accuracy too. 

Anyway that's all for now, take care Leif. 

73 Rick.

Feedback on Farhan's FB Feedback Amp Video

As I said a couple of days ago, Farhan has put out a very informative video on amplifier design. During the video we can see him determine bias, feedback and load levels, then select component values. We then see him actually build the amplifier "ugly style" and use his Antuino to test it.  Fantastic.   

Watch Farhan's video here:  https://www.vu2ese.com/index.php/2020/06/18/feedback-amplifier/


I sent Farhan some of my reactions to the video.  In the hope of stimulating some discussion, I repeat them here: 

___________________

Wow Farhan, I really enjoyed your video and learned a lot.  You definitely have the Knack for explaining this stuff. 

I have been struggling to understand feedback amps for a long time.  I took up this topic on pages 187-190 of the "SolderSmoke -- Global Adventures" book.  I was more focused on the benefits of FB amps, and on how and why feedback affected input impedance.  

 I took notes as I watched: 

-- I liked the fulcrum analogy. 

-- Really wonderful how you describe the selection of components to get desired bias. 

-- Even better when you explain tapping down of RF coil to get 50 ohms to look like 200 ohms. Great stuff. 

-- Standardized on BNC.  FB! 

-- .1uF caps.  Love them!  No argument here! 

 

-- I copied your resistor list.  Will use it with Mouser. 

-- Saving the pigtails.  Indeed!

 

-- I like your ugly "resistors first" technique.  I may have to move away from Manhattan. 

--  Wow.  Ugly circuits IN SPAAAAACE!  FB!

 

--  2N3904   I always think it is EBC when looking at the flat end of transistor with leads facing down. Only had reverse pinout with PN2N2222.  EBC is my usual assumption.

 

-- I still have the big box of trifilars you left me.  I use them.  Thanks!

-- I like that VTVM in your Antuino.   Very handy. Want one!  Also, We need to get the Antuino to go down to below 455 kHz. 

-- I also like your dual Return Loss and SWR display.  I think in terms of SWR.  Return Loss sometimes messes me up. 

-- Didn't know about the Hold and Zoom feature on Antuino. FB.

 

-- Your measurement of the Q of the crystal was awesome.

  

-- I checked my soldering iron temp:  I'm at 480 C   A bit too hot. Will back off. 

 

-- Good description of need for an attenuator at amp output to keep it in Antuino's range.

 

-- As I watched you tug on the components after the solder cooled, I remember an old and silly admonishment from the ARRL Handbook:  NEVER  use solder for mechanical connections.  Ha!  They were WRONG!

 

-- Demonstration of the flatness of feedback was great.

 

-- I found your measurement of impedance using the SWR feature of the Antuino to be very useful.  Is there a chart relating the SWR/Return Loss to actual impedance values? 

-- Loved your description of how output impedance affects input impedance.  That is why you advised use of TIA amps in my DIGI-TIA.   But now I'm thinking that if I can accurately measure impedances of non-TIA amps, I can design L networks that will keep the crystal filter passbands ripple-free, right? 

-- Great explanation of the benefits of the 6 db pads at amp output.  Allison often recommends this. Now I know why. 

-- Wow!  Now I KNOW what that two-tone box you left with me is for!  Now I understand how it can be used to measure IMD on FB amps.  I pulled mine out just as you began to discuss yours.  Really cool. 

Thanks a lot Farhan for doing this.   These videos will be of long-lasting use to homebrewers around the world.  I hope we will see many more VU2ESE videos like this one. 

73  Bill