Podcasting since 2005! Listen to Latest SolderSmoke
Tuesday, January 2, 2024
Long-time SolderSmoke supporter Ramakrishnan VU2JXN Interviewed on QSO Today
Monday, January 1, 2024
Happy New Year! Straight Key Night at N2CQR (video)
Happy New Year to all. May you make good progress on your homebrew projects, and may the radio gods act favorably on your behalf.
73 es HNY de N2CQR
Sunday, December 31, 2023
South African Homebrew: ZS4L's "Griffin" 40 Meter SSB Transceiver
-------------------
From William's QRZ.com page (https://www.qrz.com/db/ZS4L):
I have always wanted to build a homebrew transceiver-and recently I completed my pride and joy-a 40m SSB/MCW transceiver-I call it the ZS5WC "Griffin"..
"Griffin"..-well --if you know greek mythology you will find that it defeated much greater adversaries in battle.(to cut a long story short..)The parallel I am getting at is..Big commercial rigs can be taken on by a rig constructed at home-and with great success!.
Sure, it does not have the bells and whistles of a 1000mp-but the TX audio is good, the RX is great , and the SMILE factor-even with all the little quirks is off the scale!..
Basically it is a single conversion superhet-4 tuned BPF stages,ATT, Gain control stage ahead of 1st Rec. Mixer/Bal. mod (NE612) , Xtal 10mhz homebrew filter,2 transistor feedback amp, second gain control stage,2nd mixer/BFO (NE612)-On TX to PA board-4 transistor pre-amp, IRF510 mosfet PA, LPF and RX /TX relay. ON RX to TL072 audio pre-amp, Spits to AGC/S-meter amp-(741 and BC107's) and audio amp TBA820m.
ALC is done on AGC board as well with BC107 back to back to AGC bc107.
The S-meter drive is developed in the emitter leg of the AGC BC107-simple series pot to calibrate-no zero pot is required..(Works great!)
There is a volt control PCB too, with RX/TX switching.
On the main PCB there is a phase shift osc. for MCW and sidetone. Alc is adjustable from front panel from 1/2 watt to 5 watt.Rit is included in the Hartley osc. circuit and readout is done with a pic and two line LCD disp.(from AADE.com..)
Freq. drift from warm is 200Hz down in frequency then swings round and stabilises close to start freq.
Rit is good for around 5Khz swing.
Amp keying is available on the back panel, as well as an aux. 12 supply-(To run a homebrew noise squasher and amp..)
Friday, December 29, 2023
7J6CBQ on Okinawa -- And a Translation of a Science Fiction Novel about Ham Radio in China
- https://archive.org/details/
73-magazine-1993-04/page/82/ mode/2up - https://archive.org/details/
73-magazine-1993-04/page/84/ mode/2up - https://archive.org/details/
73-magazine-1993-04/page/86/ mode/2up
Wednesday, December 27, 2023
Around the World Twice (and maybe more) on 15 meters
Check it out:
https://ei7gl.blogspot.com/2023/12/twice-around-globe-on-21-mhz-and.html
Two trips around is 80,000 km or about 50,000 miles! That's quite a trip. But how about 3 times around? Or more?
Thanks to John EI7GL and to Salvador EA5Y.
Tuesday, December 26, 2023
A Marine's Home Workshop on Okinawa
Sunday, December 24, 2023
A Nice Searchable Compilation of "Hot Iron" Issues
Tom K4ZAD writes:
Bill,
This might make good copy for the SolderSmoke Daily News:
https://www.w4npn.net/hot-iron
Also it should be noted that starting with issue #122 W4NPN, Frank
Barnes is editing Hot Iron with help from the former editor G6NGR, Peter
Thornton. See: https://www.w4npn.net/hot-iron
I view the Daily News frequently, and also use the topics index on the
left when seeking more info on a subject. It often helps.
Tom K4ZAD
https://www.w4npn.net/hot-iron-searchable-compilation/
https://www.w4npn.net/hot-iron
Saturday, December 23, 2023
1000 Mile QSO with KC5U using Modified CB Rigs (video)
Friday, December 22, 2023
The New Display: The PHOLED
Thursday, December 21, 2023
Sci-Fi Series with an Apollo-era Vibe
Here is a review: