Save $2970! Build this $30 DIY Microphone!

There are a number of good ideas in this video.  We've known for a long time that many expensive mics are really simple, cheap mic capsules in fancy packaging.  This video takes a $12 mic capsule (which looks a bit like the ones we are using for the podcast), adds come amplification, a USB interface, and some really cool looking bronze packaging to come up with a very nice microphone. 

I liked his use of solder wick as a shield for the DIY mic cable.  Who knew the wick was hollow!  I also like the cooking torch for use in soldering the brass.  I need one of those. The little Murata DC voltage booster with positive and negative output seems useful. 

It seems that anyone working on this kind of project quickly gets pulled into the use of "audio speak." Late in the video Matt says his mic has nice low-end "presence."   A quick look at the comments section shows one person saying that one or the other of the mics sounds a bit "moist."   

There are many other similarly interesting projects on Matt's YouTube channel:

https://www.youtube.com/c/DIYPerks/featured

JPL, Mars Helicopter, Cube Sats, Ham Radio and more: N5BF talks to Eric Guth 4Z1UG

This morning Eric Guth has a really interesting interview on his QSO Today podcast.  

Courtney Duncan N5BF had a full career at JPL and is the current president of the San Bernardino Microwave Society.  There is a lot of interesting stuff in this interview, much of it about space exploration.  Courtney tells us about how experience with re-purposing radio gear came in handy at JPL.  For example, the helicopter that they have been flying on Mars has a very cheap and light off-the-shelf Zigbee transceiver.  He also talks about the origins of the Cube Sats.   

Here is Eric's page on this interview, with useful show notes: 

https://www.qsotoday.com/podcasts/n5bf

I like to listen to Eric's shows on YouTube -- here is the YouTube recording of the N5BF interview: 

https://www.youtube.com/watch?v=Fbr4jE11vfg

Here is N5BF's ham radio web site: 

http://cbduncan.duncanheights.com/HamRadio/HamRadio.html

Here is the club page of the San Bernardino Microwave Society:

http://www.ham-radio.com/sbms/

Thanks to Eric and Courtney! 

M0NTV's "Crystal Filters for the Fearful" (video)

I really liked Nick M0NTV's approach to making a crystal filter (see video above).  He really simplifies a process that desperately needs simplification. I remember when I was building my first superhet receiver,  I came across Doug DeMaw's schematic for a crystal tester that would allow me to properly build the filter.  But the piece of test gear was far more complicated than the receiver I was building.  I never built Doug's device. 

Nick's technique is simpler even than the G3UUR method that many of us have been using for years.  Nick dispenses -- wisely I think -- with the need to calculate motional parameters, Q,  and equivalent series resistance.  This also eliminates the need to fidget around with the design software such as Dishal or AADE.  

Nick uses the Cohn topology (good choice) and uses kind of an "informed cut-and-try" technique to come up with the capacitor values.  

Filter impedance is determined with series trimmer resistors and the NanoVNA to watch the resulting passband.  Nick says this is a Charlie Morris ZL2CTM suggestion.  It obviously works very well -- the ripple that would result from impedance mismatch is eliminated.  

Nick's determination of the best turns ratio for the impedance matching transformers is brilliant.

Nick apologizes for what he says is a long video.  But it is only 30 minutes or so long, and if you are going to build your own superhet or SSB filter rig, it is well worth watching.   

Three cheers for Nick and for Charlie!  Thanks guys!   

The Importance of Keeping the Noise FLAT

 

A few days ago I put up a blog post about using a noise generator (in my case my cheap FeelTech sig generator) and my TinySA spectrum analyzer to look at the passband of a crystal filter.  I was using the 9 MHz filter used by Dean KK4DAS and the Vienna Wireless Makers Group.  The idea is simple: insert broadband noise into the input. The filter should pass more of the noise that falls within its passband.  The TinySA should let you see this.  At first, I was pleased that I could clearly see the passband.   I thought I had succeeded.  See above. 

But I was bothered by something.  Look at that bump in the passband.  It should be close to flat across the top.  

I decided to take a look at the same filter with my NanoVNA.  Here I was not using a noise generator.  The NanoVNA sweeps the filter using and looks at output in the Log-Mag mode.  Here is what it looked like (below): 

That was much better.  But why the difference?   Tony Fishpool G4WIF suggested that my noise source might not be putting out noise at the same level on all frequencies.  I took at look at the noise output of the FeelTech sig gen in the range of the filter passband (with some above and below frequencies for reference) and I found that the flatness of this noise depended a lot on what frequency I had the sig gen set to.  I tuned it around a bit until I found a setting that produced a flat noise output in the desired frequency range.  Then I went back and swept the filter with the noise and the TinySA again.  Here is what it looked like with the "flat" noise: 

Better,  I think.  Closer to the passband displayed by the NanoVNA.   

Tony points out that these Chinese sig gens don't really put out random noise -- they give us predictable noise.  Dean said "Predictable Noise" would be a good name for a rock group.   I said they could open for my favorite: "The Ceramic Spurs." 

Juliano

 

https://n6qw.blogspot.com/2021/11/a-scratch-built-minimalist-ssb.html

Farhan's Amazing Knack Story: From a Boyhood SW Receiver to the Design of the sBITX SDR

The presentation starts at about the 4 minute point. 

I think if I were only allowed to watch one YouTube video in the next year, I'd make it this one. 

In this amazing RSGB video, Ashhar Farhan VU2ESE takes us back to his earliest days as a radio amateur.  He tells us about his very early desire to build radios, his early projects, and his personal evolution as a designer and builder,  from a simple DC receiver, to the BITX, the Minima, the uBITX and now the hybrid HDR/SDR sBITX.  

There is a lot of  homebrew wisdom and tribal knowledge in this video. And we learn so many hitherto unknown details about the rigs that have become so important to us:  

-- Farhan had the EMRFD book with him on the famous flight from Sweden to India during which the BITX was designed. 

-- We learn about the origins of the BITX oscillator circuits, and that the VFO and BFO are essentially the same.  

-- I was really pleased that Farhan included a picture of my HB BITX17 rig in his presentation. 

-- Farhan discusses the difficulties he faced in obtaining needed parts in India. 

-- We actually see the nylon washers that Farhan used in the original BITX. 

-- Farhan discusses his early system for measuring coil inductance. 

-- In addition the huge contribution of EMRFD,  Farhan talks about how he was helped by Pat Hawker G3VA's writing, and the ARRL's SSB Handbook. 

-- Farhkan talks about his Tex 465 'scope and his building of a Spectrum Analyzer. 

-- We see his evolution to dual conversion. We see the conceptual birth of the Minima and the birth (thanks Wes!) of the TIA amps.  I didn't know about the HF-1.  Then Farhan designed the uBITX and now the sBITX.  

 -- Farhan talks about his practice of taking the pictures of new rigs with the new rig sitting atop the book that was most important in its design and construction.  FB. 

-- I was really blown away by Farhan's presentation of how the uBITX advertisement was inspired by and in many ways based on the Heathkit ad for an HW-101.  Amazing. 

-- I learned a lot from Farhan's discussion of SDR theory.  I pledge to spend more time with this.  I really like Farhan's hybrid HDR/SDR approach. 

-- But I have a question:  Farhan seems to say that we'd need a big expensive GOOGL computer to do the direct sampling HF SDR.  But doesn't the little RTL-SDR do just that?  Without a GOOGL?  

-- Great to see Wes's AFTIA being used in the sBITX.  

-- Really cool that Farhan has his mind on VHF transverters when designing the sBITX.   I liked use of the TCXO module to free up one of the Si5351 clock outputs.   FB.  And great to include an idea from Hans in this rig. 

Thanks very much to Farhan (who stayed up until 3 am to do this!) and to the RSGB for hosting.

Buy a Real Sputnik Satellite! Let's Put Sputnik Back in Orbit!

Only 85,000 Euros (that's the opening bid).  But hey, it comes with the receiver pictured on the right.  I guess that's so you can listen to the beeps. 

Here's the description: 

---------------

Laboratory Test Model of "Sputnik 1 EMC/EMI", 1957
1:1 scale test model of the satellite "Sputnik-1", serial no. "0K6-1/004/1957", with built-in transmitter (including modern 12-volt power supply), polished stainless-steel sphere, consisting of two threaded hemispheres of approx. 23 in. diameter with two pairs of antennae of 95 in. and 105 in. at an angle of 35 degrees to the axis, on stand with O-ring, stand approx. 59 in. high, stand and model together approx. 79 in. high, accompanied by a Tesla Maj 620A radio receiver, manufactured in Prague c. 1956, restored working condition, including replacement of the silver-zinc battery with a modern alternative and a new metal casing for the electronic transmitter. Note: Built at the Experimental Design Bureau-1 (OK?-1/OKB-1) factory, also known as S.P. Korolev Rocket and Space Corporation Energia, Koroljow, Soviet Union, in 1957, shortly before the launch of Sputnik-1. - An impressive artefact from the dawn of the space age, of which few models are known. - Provenance: From the collection of Dr. Frank Malina, USA/CSSR.

Start Price: EUR 85.000

---------------------------

I'm a bit suspicious of the "modern 12-volt power supply,"  the "modern alternative" battery and the "new metal casing for the electronic transmitter."

Here's the link to the auction: 

https://www.the-saleroom.com/en-gb/auction-catalogues/auction-team-breker/catalogue-id-breker10030/lot-9c87007d-f0ff-4414-9663-adc200690819

Here's my suggestion:  Musk or Bezos or Branson should buy this thing, fix it up a bit, and put it back in orbit.  So we can listen to it again. I know a version of this was done back in 1997.  But I think we should do it again, this time with the actual test model. 

Here are the earlier SolderSmoke blog posts about Sputnik and Sputnik-related projects: 

https://soldersmoke.blogspot.com/search?q=Sputnik

Steve Silverman sent the auction posting to me.  Thanks Steve. 

It just so happens that earlier in the week I was out at the Air and Space Museum facility near Dulles Airport, where I saw this flight backup of the Vanguard satellite: 

Using Noise to Sweep a Filter with the TinySA

 

I've been meaning to try this for a long time.  Years ago Tony Fishpool and Graham Firth wrote about using a noise generator and a spectrum analyzer to sweep the bandpass of a filter. The idea here is to send very broadband noise into a filter, and then use a spectrum analyzer to see which frequencies make it through.   

I thought about building a noise generator like the one in Tony and Graham's book, but then it occurred to me that probably had one sitting on my bench.  Sure enough, a look at the manual for my cheap FeelTech function generator revealed that PRESETS 3 and 8 are noise generators.   I quickly pulled out a 9 MHz filter that Dean KK4DAS had given me, put the noise into one end and the TinySA on the other end.  Bob was quickly my uncle.  See above.  

More recently Tony G4WIF built a comb generator as a noise source: 

http://www.fishpool.org.uk/combgenerator.htm

Thanks to Tony, Graham, and Dean.  And to the folks who developed the TinySA. 

Why Does Solder Smoke Always Go Right Into Your Face? Now We Know

Because our podcast and blog is called SolderSmoke, I felt compelled to post about this video in which a fellow does some pretty interesting research into how solder smoke actually moves.  We don't often see this much concern about the behavior of our beloved smoke. 

Thanks to Todd K7TFC for alerting us to this.  

I use a small fan to disturb the airflow pattern. 

How to Listen with your TinySA

We don't get many chances to do hardware work on a piece of gear like the TinySA, but here we have one.  I mentioned this a while back:  Not only will the TinySA display the signals it detects, but it will also allow us to listen to these signals.  Very cool.  I am going to do this.  

Here is the link showing how to do the mod: 

https://tinysa.org/wiki/pmwiki.php?n=Main.Listen

All the cool people listen to classic rock with a TinySA: 

SETI, Proxima Centauri, The Parkes Dish, and Intermodulation Distortion?

 

https://www.sciencealert.com/exciting-mystery-space-technosignals-were-indeed-produced-by-sentient-life-us

A cosmically interesting troubleshoot.  But I'm not sure about their explanation.  Why would the intermod disappear when they moved the Parkes Radio Telescope off of Proxima Centauri?  

Putting a Ceramic Filter in the "Mate for the Mighty Midget" Receiver

It is really simple.  I had one of the +/- 3kHz (6 kHz wide) 455HT filters on hand.  The spec sheets call for 2000 ohms at both ends, but looking at the schematic it appeared that I already had high impedance on both sides of the filter.  I put a .001 uF cap on the input side to keep the DC voltage off the filter (see above and below). This capacitor allows us to avoid the dreaded problem of electro-migration that is so nicely described by SV8YM here: 

http://sv8ym.blogspot.com/2010/07/mysterious-case-of-withering-filters.html. 

Tasos also provides a good description of the innards of those little black boxes that contain ceramic filters. 

Once you get the filter in your receiver, you have to carefully place the BFO signal in relation to the filter passband.  I have trouble properly sweeping 455 kHz filters -- my HP8640B will not go that low.  Nor will my Antuino (I need to modify the code -- someone help me please).  I know the NanoVNA will do the job, but I just couldn't seem to get it to work.  So I went "old-school" and manually swept the filter using my FeelTech sig gen and my Rigol scope.  This gave me a rough idea of where the passband was.  I put the BFO on the low end of the filter passband, at 451 kHz.

   

With this filter the MMM RX has become a real asset.   The 6 kHz bandwidth allows for nice reception of both SSB signals and AM sigs.   I may try to use one of the +/- 2 kHz filters  (4 KHz wide), but so far I have not been able to find a source for this part.