Wow! Jomon VU3IZD's Homebrew Modular BITX 40 Transceiver

 I really liked Jomon's rig.  The modular approach is brilliant as is his explanation of how each stage works.   He emphasizes the benefits of this modular approach.  

You can see that he is a true homebrewer -- you can see it in his expressions at the end.  Just look for the smiles, for the obvious feeling of pride and satisfaction that comes from working a station more than 450 km away with a rig that he built himself.  

I also really liked his homebrew microphone.  FB Jomon!  

Rogier PA1ZZ sent me a short video showing Jomon's antenna for portable operations.  In that video you catch a glimplse of this rig.  Both videos are great. The antenna short is here: https://www.youtube.com/shorts/YVgoy4rPddQ   But for me the best of the two videos is the one describing the rig (above).  

We posted about Jomon's homebrew projects back in December 2025:  https://soldersmoke.blogspot.com/2025/12/homebrew-radio-from-southern-india.html

Jomon is from Kerala in southern India.  Kerala seems to be the center of a lot of great homebrew activity.  Many of the Indian hams that I have talked to are from Kerala:  https://soldersmoke.blogspot.com/search?q=Kerala  

Here is a map showing Kerala state: 

Thank you Jomon!  And thanks Rogier! 

The Wizard of Kerala (India) -- Denny VU2DGR -- SDR and HDR

 

His signal was just booming in on 20 meter SSB yesterday evening.  It was one of the strongest signals I've heard from India.  I wasn't able to get through the pileup, but I heard mention of a homebrew station at his end...  Sure enough a look at his QRZ.com site shows that a LOT of solder has been melted in his shack.  Both SDR and HDR stuff.  Tube projects including an 807 amplifier made from "components collected from the scrapyard." And a homebrew 20 meter Moxon.  Check it out: 

https://www.qrz.com/db/VU2DGR 

FB Denny!

Kerala is on the southwest tip of India.  It is something of a hotbed of technological innovation.  My only Indian contact using my current series of homebrew dual-banders was with VU3TPW -- Renju is also in Kerala. 

SolderSmoke Podcast #248 -- Back from the Summer -- Spurs and Filters, S-meters, 6BA6 mania, Shirtpocket rigs, MAILBAG

The PsssT Kit, coming soon from Mostly DIY RF

SolderSmoke Podcast #248 is available for download: 

Audio: http://soldersmoke.com/soldersmoke248.mp3

Video: (800) SolderSmoke Podcast #238 -- Spurs and Filters, S-meters, 6BA6 mania, Shirt-pocket rigs, Mailbag - YouTube

Travelogue:  Trip to the Dominican Republic 3-9 August.  Thinking about the M0NTV video on mixers...  

Solder Smoke Shack South is almost done.   I am thinking about workbenches, operating tables and antennas.  How high should an electronics workbench be?   Table height?  Or workbench (woodwork) height?  

My son and I went to see "Oppenheimer"  Trinity test scene very cool.  They wanted to see if the gadget would work! 

Is the SolderSmoke blog completely archived on the WayBack Machine?  Please check and let me know.  Thanks. 

Bill's Bench: 

-- I've been working a lot of DX with the homebrew rigs:  Indonesia, Australia, Japan, Hawaii.  Lots of fun.  15 meters has been especially good. But the rigs still need work: 

-- M0NTV's video got me to put TinySA to work.  I found that output from dual banders could be improved.  Spurs and harmonics. Yuck.  I need more TinySA -- ordered the TinySA Ultra. 

-- Allison KB1GMX helped a lot.  EB63A amp was unstable, especially on 10 meters.  Higher frequencies are harder!  Tightened up shielding, negative feedback, and bypassing.  This all helped, but I found that I needed to take the higher frequency LP filters out of the amplifier box.  W3NQN filters are better, with steeper skirts and better 2nd harmonic rejections. NanoVNA proving very useful. https://www.gqrp.com/Datasheet_W3NQN.pdf

-- Also worked on the Bandpass filters for these rigs.  Farhan's comments on skirts of different filter configurations.  Some are "LSB" filters (with steeper skirt at the highest freq) and some are "USB" filters (with the steeper skirt at the lower frequency)  See diagrams on the blog page. So I built USB new filters for 12 meters and for 10 meters. 

-- Danger that my unshielded wooden box rigs might be inviting feedback.  So I shielded the 1510 rig with copper guitar amp tape (conductive adhesive).  Good stuff.  

-- Phase Noise rears its ugly head again.  See blog posts. 

----------------------

SHAMELESS COMMERCE DIVISION:  

Mostly DIY RF getting ready to release PsssT kits.  Target date:  December 18, 2023 (E Howard Armstrong's birthday).  https://mostlydiyrf.com/

Amazon Search box seems to have died.  I can't get it back.  Can anyone tell me what happened?  (There seems to be "explanations" from Amazon about this, but they are written in a strange language that I cannot follow.)  Something similar happened with the Google Ads on this blog page.  Apparently you can't have ads both on YouTube and blogger.  

But hey, there is Patreon for those who want to support the podcast and blog. 

-------------------------

Pete's Bench

An S-meter for Bill? 

6BA6 Mania! 

QRP SSB with 6BA6

Shirtpocket rig re-build

Mailbag: 

Walter KA4KXX has a great article about homebrewing in the September 2023 QCWA Journal.  

 Steve KC1QAY -- Has joined the CBLA.  I sent him a 3579 crystal.  He built a MMM and experienced JOO.  And Allison KB1GMX is in his local radio club.  TRGHS. 

Ajay VU2TGG in Pune, India -- launching a high school receiver effort. 

Denny VU2DGR The Wizard of Kerala: https://soldersmoke.blogspot.com/2023/08/the-wizard-of-kerala-india-denny-vu2dgr.html

Joe VK4BYER working with kids a remote Australian community.  FB. 

Todd K7ZF -- Wants to get into homebrewing. Advised him to start small. 

Dean KK4DAS:  Fixing Hallicrafters Worldwide RX. Ciudad Trujillo!  Got question from Mark in the VWS Makers Group:  HOW DOES Michigan Mighty Mite REALLY Work.  See blog. 

Trevor Woods -- Info on Super Islander Mark IV made in Cuba from old CFL bulbs.  FB. 

Bob KD4EBM sent me some great stuff:  Sony SW receiver,  QCX Mini.  Made a CW contact with the QCX.  Felt virtuous -- it is going to the DR.  Thanks Bob. 

Peter KD2OMV:    One of the guys I worked with the ET-2 transceiver.  Great to hear from him. 

Armand WA1UQO   Richmond area radio museum? https://www.youtube.com/watch?v=BSCmljje1p8

Mike WN2A -- Sent me a great care package with lots of toroids.  A lifetime supply!  Thanks Mike!

Nate KA1MUQ got his Doug DeMaw receiver going after 38 years!  FB.  Been there, done that! 

Tony: G4WIF Liked Valveman video about Gerald Wells.  He visited him! https://soldersmoke.blogspot.com/2023/08/valveman-story-of-gerald-wells.html 

Dean KL7MA  Bill talked to him on 15 SSB.  He had worked Wes W7ZOI!  FB! 

Homebrew Radio from Southern India

I came across this channel yesterday -- there is a lot of FB homebrew content here.  And it is partially in the Malayalam language of Kerala state in Southern India.  

About 38 million people speak Malayalam: https://en.wikipedia.org/wiki/Malayalam. 

Check out his channel:  

 https://www.youtube.com/@MrtechElectronics

HB2HB -- A Contact with Denny VU2DGR (video)

At first I didn't realize it was Denny.  On September 11, 2023 at about 2330Z I had walked back into the shack after dinner.  I think DX spots showed an Indian station on 20 meter SSB.  Without realizing who it was, I tuned him in on my Mythbuster rig, heard the other station sign off, and quickly threw in my call.  Denny came back to me right away, and I think both of us then realized that we recognized the call of the other station. Wow, it was Denny, VU2DGR, the Wizard of Kerala!   At the time of the QSO, I didn't have my phone with me; after we spoke, I went to get it,  so the video above captures part of Denny's subsequent contact. (You can also at one point hear Guapo barking.) 

Denny has been running a wonderful station that combines SDR gear with and HDR tube type amplifier and a homebrew Moxon.  

Here is Denny's station. The transceiver is a RadioBerry.  the amplifier and power supply are on the other table.  

Here is the homebrew tube-type amplifier.  This is the part of the station that really puts the HB in HB2HB! That's the power supply on the left and the amplifier itself on the right: 

That amplifier has three 807s in it, with a 6L6GC: 

Here's a video on the RadioBerry transceiver. 

Finally, here is Denny's magnificent homebrew 20 meter Moxon: 

Thanks Denny!