Podcasting since 2005! Listen to Latest SolderSmoke

Friday, June 7, 2013

Dutch Knack During WWII

 
de_jongens_van_de_hobby_club
 
There is a very nice article on the MAKE blog this morning: 
http://blog.makezine.com/2013/06/06/an-early-maker-story-from-holland/
 
Our book: "SolderSmoke -- Global Adventures in Wireless Electronics" http://soldersmoke.com/book.htm Our coffee mugs, T-Shirts, bumper stickers: http://www.cafepress.com/SolderSmoke Our Book Store: http://astore.amazon.com/contracross-20

Thursday, June 6, 2013

Quote of the Day: On Tinkering

Finally, some justification for my "build first, design later" method:

"Contraptions, machines, wildly mismatched objects working in harmony -- this is the stuff of tinkering.  Tinkering is, at its most basic, a process that marries play and inquiry."

from www.exploratorium.edu/tinkering   Quoted in Massimo Banzi's book "Getting Started with Arduino."

Our book: "SolderSmoke -- Global Adventures in Wireless Electronics" http://soldersmoke.com/book.htm Our coffee mugs, T-Shirts, bumper stickers: http://www.cafepress.com/SolderSmoke Our Book Store: http://astore.amazon.com/contracross-20

Tuesday, June 4, 2013

Alan Yates, VK2ZAY, is back in the knack!


I was getting kind of worried.  I hadn't seen any new articles on Alan's excellent web site.  But on my last visit I learned that he has moved to Seattle and is going to Maker Faires:  http://www.vk2zay.net/article/268

Our book: "SolderSmoke -- Global Adventures in Wireless Electronics" http://soldersmoke.com/book.htm Our coffee mugs, T-Shirts, bumper stickers: http://www.cafepress.com/SolderSmoke Our Book Store: http://astore.amazon.com/contracross-20

Save 20% on Knack Books

Save 20% on your next order by using code GLOW at checkout. Offer ends June 7 at 11:59 PM PDT
Codeword: GLOW.   Very appropriate for Grayson's Thermatron book: 



http://www.lulu.com/shop/grayson-evans/hollow-state-design/paperback/product-20987562.html


And also for mine (tubes, QRP fireflies and all that):



http://www.lulu.com/spotlight/soldersmoke

Our book: "SolderSmoke -- Global Adventures in Wireless Electronics" http://soldersmoke.com/book.htm Our coffee mugs, T-Shirts, bumper stickers: http://www.cafepress.com/SolderSmoke Our Book Store: http://astore.amazon.com/contracross-20

Monday, June 3, 2013

1-29 MHz In One Small Box

 
This weekend I put the Arduino/AD9850 Direct Digital Synthesis device into a box this weekend.  It is sort of evolving into a general purpose HF signal generator and/or VFO.  It is really kind of neat that this little collection of boards can generate RF across that range, with accurate digital readout.  Thanks again to Richard Visokey, AD7C, for the circuit and the code.  As you can see, my cabinet making skills will never land me a job on the Discovery Channel,  but I'm kind of pleased with the box.  I picked up the wood panels from a hobby/craft shop. 

 
 
I left a lot of space in the box.  I envision an amplifier taking the output from its current .4 milliwatts up to around 10 milliwatts, followed by step attenuators (pads).
 

Here is the other end.  Of course, I could have just taken the ATMega chip out and avoided putting the whole Arduino board inside the box, but I'll leave that exciting digital adventure for a future project.


Our book: "SolderSmoke -- Global Adventures in Wireless Electronics" http://soldersmoke.com/book.htm Our coffee mugs, T-Shirts, bumper stickers: http://www.cafepress.com/SolderSmoke Our Book Store: http://astore.amazon.com/contracross-20

Sunday, June 2, 2013

Simple Homebrew SDR



I know that "simple" and "homebrew" aren't the words that come to mind when we think of Software Defined Radios, but minimalist guru Peter Parker, VK3YE, reminds us that with little more than an antenna, a diode, a crystal oscillator and a connection to the computer soundcard, you can dive into the world of SDR. 

I've been doing this for some time now, but my receiver uses a 40673 dual gate MOSFET and a universal VXO from George Dobbs, G3RJV.  I've been running mine with the FLDIGI and JT-65 HF programs.  Peter's video alerted me to the charms of SDRadio from Alberto, I2PHD.  This is a very nice program.  Of course, I'm always happy to add a dash of Italy to my operations.  Thanks Peter!  Thanks Alberto! Thanks George!


Our book: "SolderSmoke -- Global Adventures in Wireless Electronics" http://soldersmoke.com/book.htm Our coffee mugs, T-Shirts, bumper stickers: http://www.cafepress.com/SolderSmoke Our Book Store: http://astore.amazon.com/contracross-20

Friday, May 31, 2013

Cliff Stoll DEFINITELY has The Knack! And he Kluges!

 


The Maker Blog has a nice article on Cliff Stoll, the author of "Silicon Snake Oil" and "The Cuckoo's Egg."   I liked Cliff's books and included quotes from them in "SolderSmoke -- Global Adventures in Wireless Electronics."  I was glad to see that Cliff is doing well and still tinkering.  Be sure to check out the video on his R/C fork lift.  FB OM.

I was, of course, very intrigued by the slide showing the symbol of the "KlugeMeisters of America." Can we get a pronunciation ruling from Cliff?  Can we nominate people for induction into the KMA?  

In Spiritu Klugo!  Non Vacuo Sine Glyptum!  Words to live by,  my friends...  Patrick Murphy explains all this here:  http://www.cv.nrao.edu/~pmurphy/kluge_where.html 

Our book: "SolderSmoke -- Global Adventures in Wireless Electronics" http://soldersmoke.com/book.htm Our coffee mugs, T-Shirts, bumper stickers: http://www.cafepress.com/SolderSmoke Our Book Store: http://astore.amazon.com/contracross-20

Wednesday, May 29, 2013

Ham Radio, the tsunami, HW-101, Tek 465, BITX-20



I know many of you guys have seen this before. And I know that Farhan is tired of seeing it pop up again and again.  But it just appeared on my Facebook page today and I watched the whole thing and saw things I hadn't noticed before:  There's a Heathkit HW-101 (or maybe its an HW-100).  There is a Tech 465 oscilloscope. There is a BTX-20!  

Our book: "SolderSmoke -- Global Adventures in Wireless Electronics" http://soldersmoke.com/book.htm Our coffee mugs, T-Shirts, bumper stickers: http://www.cafepress.com/SolderSmoke Our Book Store: http://astore.amazon.com/contracross-20

Tuesday, May 28, 2013

Peter Parker's Knobless Wonder Minimalist SSB Rig

 


Oh man, Peter Parker has done it again!   As he did with the Beach 40, he has come up with a circuit that will attract a lot of attention.  It is a single frequency SSB transceiver with no knobs (or windows, or menus!) 

Peter Marks recently had breakfast in Melbourne with VK3YE:
http://blog.marxy.org/2013/05/melbourne-meetup-with-homebrew-legend.html
There are some great pictures of the new rig, and the Beach 40.

Here's the message  from VK3YE (to the Minimalist Radio Group) that may
someday be seen as the start of the Knobless Revolution:

Some might reckon that SSB is inevitably too complex to be in the minimalist
class, but I beg to disagree.

I reckon you could build a whole SSB transceiver in 2 days of solid work. I
took a day to build what will be described below up to the stage where it

was receiving & producing a low level SSB on Tx.

Take this recipe:

1. Build the back end of the BitX
http://www.phonestack.com/farhan/bitx.html
That is everything to the right of (and including) the Q2 & Q12 stages.

2. Use cheaply available 7.159 MHz crystals in the crystal filter and
carrier oscillator. Keep filter capacitor values the same. Remove L3 in the
carrier oscillator circuit. Use a slightly bigger trimmer in the carrier
oscillator (say up to 50 pF) and wire in series with crystal. Align trimmer
so carrier freq is 7160 kHz.

3. Build a power amplifier stage / relay / LPF as per the Beach 40. Just
the last 2 stages (using BD139s) should be enough. Output maybe 2w.

The result is a 10 transistor / 1 IC SSB transceiver on 7160 kHz. It's
crystal controlled but at least during the day 2 watts to a good antenna
should be enough for people to hear and reply to your CQ calls up to 800 -
1000 km away. Of course you could go a bit more minimalist and remove the
LM386, substituting 1 transistor instead (as per the original Beach 40)
which is what I did.

The main thing that's odd is it has no knobs - no tuning, RIT, volume, RF
gain etc. Just sockets - for mic, phones, antenna and power to feed it what
it needs (Rx RF, Tx audio, DC power) and give what you want (Rx audio and Tx
RF).

It is philosophically different to using any other transceiver. You either
accept what the radio dishes up (frequency, AF gain, mic gain etc) or you
don't. On or off - there is no other state. Take it or leave it. Like a
cat this is a radio that lives on its own terms.

Those used to fiddling with adjustments will find the 'knobless wonder'
transceiver causes them to be at a loose end. Those so afflicted will smoke
more, bite their nails more or eat junk food more. Sometimes elegant
simplicity in radio can be a health hazard - maybe knobless rigs should
carry health warnings.

On the other hand, and in my view this outweighs the above, there is the
aesthetic satisfaction that comes from using a rig that cannot be made any
simpler. Especially if it's a mode, like SSB, that's widely thought
constructionally complex. Plus it takes little in return - the power
consumption will be a fraction of what a commercial rig will demand.

73, Peter VK3YE

Our book: "SolderSmoke -- Global Adventures in Wireless Electronics" http://soldersmoke.com/book.htm Our coffee mugs, T-Shirts, bumper stickers: http://www.cafepress.com/SolderSmoke Our Book Store: http://astore.amazon.com/contracross-20

Monday, May 27, 2013

Stacked Shields -- My Arduino DDS LCD Sandwich


You can barely see the Arduino board down at the bottom.  Above it is a homebrew shield that has the DDS board.  On that shield I also put a female header for a small 16X2 LCD board.   This arrangement avoids the rats nest of wire that often accompanies these digi projects.  This thing had me pulling my hair out yesterday.  I couldn't get the display to work.  After a lot of checking and re-soldering and testing, I concluded the LCD board was bad.  Good thing there is a Microcenter right down the road.  I got a new display and my composure returned.

Mark, K6HX, over at Brainwagon has been encouraging me to continue down the digital path.  Other SolderSmoke friends are wary of this digitization -- one wrote asking "Where is the real Bill Meara and what have you done with him?"

I like the Arduino projects.  This little device certainly demonstrates how you can do things with the digi stuff that would be extremely difficult to do with our beloved analog, discrete component circuitry.  On the other hand, as I was pulling my hair out trying to figure out WHY the display wouldn't display, I came across an e-mail describing Peter Parker's latest minimalist discrete component rig. Why, I asked myself, had I left the happy land of understandable circuits?   Why had I allowed myself to be sucked in by the siren song of Arduino? 

I guess it is good to try something new, to learn something, to get out of your comfort zone.  But excuse me now -- I'm going to fire up my 17 meter analog discrete component rig.  The one with VXOs in both the receiver and the transmitter.  But I'm going to leave the Arduino DDS on -- I like looking at the display.
 
Our book: "SolderSmoke -- Global Adventures in Wireless Electronics" http://soldersmoke.com/book.htm Our coffee mugs, T-Shirts, bumper stickers: http://www.cafepress.com/SolderSmoke Our Book Store: http://astore.amazon.com/contracross-20

Sunday, May 26, 2013

Thoughts on DSB PSK-31



To QRP-L: 

I have a JUMA TRX-1 cw and dsb transceiver. It seems to me that if I transmit an psk signal there would be two signals generated, one on usb and another on lsb. Is this correct? It does not seem like a good thing to do to me.
Thoughts?
73 Larry WB4HLX

-----------------------------

Larry: 

I've been experimenting with DSB PSK for the last few weeks.  Sure, you are using twice the needed bandwidth,  but in this mode that means you are using only an additional 31 HERTZ! That's not a lot.  Also, if (as I am) you are using a Direct Conversion receiver, in your waterfall you will also be looking at two sets of frequencies -- those going about 2 kHz above center AND 2kHz below.  This helps you avoid causing interference:  If the frequency looks clear on your screen, you can be reasonably sure you won't be bothering anyone with your extra sideband.

This is similar to the AM question: there too you are using additional spectrum.  But it is allowed.

Doug DeMaw and other esteemed technical gurus have promoted DSB as a useful mode that -- through its relative circuit simplicity -- encourages the building of homebrew gear.  DeMaw wisely advised against using high power when running DSB.

I've been having fun with PSK DSB.  I've had many contacts.  I'm running less than one watt to a dipole.   One curious thing that I've noticed:  PSK seems to be sideband independent:  When I tune in a PSK signal on my FLDIGI waterfall, the software will decode it even if I have the FLDIGI set for LSB or USB. 

You might also want to try JT-65.

Good luck. 

Glad to hear that I'm not alone.           Center             Glad to hear that I'm not alone.

73   Bill N2CQR
http://soldersmoke.blogspot.com

Our book: "SolderSmoke -- Global Adventures in Wireless Electronics" http://soldersmoke.com/book.htm Our coffee mugs, T-Shirts, bumper stickers: http://www.cafepress.com/SolderSmoke Our Book Store: http://astore.amazon.com/contracross-20

Saturday, May 25, 2013

Ontario Knack Story

Click to shrink...

Bill:

I think I’ve finally earned the right to contact you.  I have a really severe case of the knack.  I did not realize it until I discovered amateur radio.  My thinking is that there is no hope for those afflicted with the knack.  I believe that amateur radio helps those afflicted to deal with the condition.  It alleviates the symptoms.   

For years I wandered through the technical wilderness dabbling in physics (I have a M.Sc. in Nuclear Physics), aircraft (I was a tow pilot at a gliding club for several years), high power rockets (www.napas.net), electronics and amateur radio.  The most enjoyable part of radio is not the QSOs it’s the building and the satisfaction of a working device. 

I am relatively new to amateur radio but I’ve always had a passion for all things electronic (and technical).  I am a self-taught electronics geek and have been playing around with digital electronics (PIC microcontroller) for some time know. I starting building altimeters for high power rockets that has the capability of setting off onboard charges  to separate the rocket.  When your rocket reaches 10,000 feet, you cannot open a chute at apogee because it’s going to drift too far and you need to open the rocket at apogee (no chute) and then open the main chute at about 1000 feet to minimize drift. I routinely travel to the US to attend LDRS (large dangerous rocket ships). 

Anyway I had to get my amateur ticket for onboard video camera and trackers (beacons).  Once I got my license and got into radio, it was like a drug!! 

I am now  home brewing everything in my shack.   

When I came across Soldersmoke that was like a super drug.  I downloaded and listened to EVERY episode (seriously!).  I followed you and Mike’s journey and I learned soooo much.  I was devastated when I found out about Mike.   

You inspired me to build my own transmitter.  Earlier this year I built a 20m CW transmitter for my rocket that will eventually send telemetry (in CW from a PIC microcontroller) completely from scratch – no kits – no one’s design. Your early episodes also pushed me to learn LTSpice which I used extensively to model transmitter design of others as well as my own. I’m thinking of calling the transmitter “kaputnik”. 

My design is based on a Chinese AD9850 DDS module which generates a square wave followed by a class E amp (with a tuned circuit).  Puts out 1 watt of power with harmonics down by about 40db.  The reason I used this module with that I can easily change frequency (with mod to tuned circuit)  – after all the DDS module is programmable.  All I need to do now is clean up key clicks because the carrier is turning on too fast.  I playing around with slowly increasing the bias on the mosfet to allow the power output to increase slowly.  Any advice/tips/tricks would be appreciated. 

Next project is a remote antenna switch.   However, you have me close to tackling a SSB transceiver.
Anyway, keep up the great work and I’m looking forward to listening to another 150 episodes!! 
Take care and “stay thirsty” my friend. 
73
Dave Rajnauth, VE3OOI

Our book: "SolderSmoke -- Global Adventures in Wireless Electronics" http://soldersmoke.com/book.htm Our coffee mugs, T-Shirts, bumper stickers: http://www.cafepress.com/SolderSmoke Our Book Store: http://astore.amazon.com/contracross-20
Designer: Douglas Bowman | Dimodifikasi oleh Abdul Munir Original Posting Rounders 3 Column