Podcasting since 2005! Listen to Latest SolderSmoke

Saturday, August 22, 2015

SolderSmoke Podcast #179 SPECIAL TENTH ANNIVERSARY EDITION




SolderSmoke Podcast #179 is available:

22 August 2015


YESTERDAY MARKED 10 YEARS OF THE SOLDERSMOKE PODCAST
-- A clip: The first minutes of SolderSmoke #1
-- A trip down SolderSmoke memory lane.
-- The SolderSmoke lexicon -- words and phrases we use (a lot).

BENCH REPORT
-- Pete's antenna project.
-- Pete's new Blog:   http://n6qw.blogspot.com
-- Bill's big amplifier problem fixed thanks to Allison KB1GMX.
-- Six digit freq readout with an Altoids case.

THE Si5351 PHASE NOISE CONTROVERSY
-- ALL oscillators make noise.
-- Keeping things in perspective:  It is 100 db down!
-- Observations and tests from LA3PNA, NT7S, and K0WFS:

-- Try it, you'll like it!  The benefits trying things on real rigs.

NEWS
Interviews on "QSO TODAY" with Eric 4Z1UG.
Horrible band conditions.
Looking at Saturn with telescope.

MAILBAG
Another recruit for the CBLA:  Paul KA5WPL.
Ron G4GXO on Bell-Thorn and Eden9 SSB rigs.
Rupert G6HVY on Kon Tiki radio and Mr. Spock.  
Mikele's Croation BITX rigs.
Dean AC9JQ's TIA.
Bryan KV4ZS will build an LBS receiver.
Dave Anderson give Pete good antenna advice.
Steve Smith moves in from the garage.

Pete has built  12 SSB transceivers.  Intervention time? 

Our book: "SolderSmoke -- Global Adventures in Wireless Electronics" http://soldersmoke.com/book.htm Our coffee mugs, T-Shirts, bumper stickers: http://www.cafepress.com/SolderSmoke Our Book Store: http://astore.amazon.com/contracross-20

8 comments:

  1. congrats on completing a decade of soldersmoke, bill and pete.

    ReplyDelete
  2. Bill, Pete,
    Awesome podcast and Congrats on 10 years. By far this is my favorite podcasts. I would like to propose the first bylaw for the IBEW. It is "Thou shalt not propagate information without first, for yourself, collecting, evaluating and presenting data to substantiate and reinforce your claim of information.” Or something in those words.
    Edward
    WH7TT

    ReplyDelete
  3. Bill and Pete -

    I don't know about the magic Kon-tiki hydrogen generating powder but I suspect it's similar to the powder used in US Military MRE (Meals, Ready to Eat) heaters. The MRE heater that comes with most MREs is basically a plastic bag with some magic powder in it. Add a little water and heat (and hydrogen gas) result. Punch in "mre heater" into a Youtube search box for more "info".

    Chuck, WB9KZY

    ReplyDelete
  4. Hi Guys,

    First I never had an MRE but ate a lot of C Rations vintage 1965 at Chu Lai, South Vietnam. We had "heat tabs" that came in the case of C Rations along with the very clever fold over can opener. I got pretty good and taking the expended cans and converting them to mini-stoves.

    There is nothing finer than having hot "beanies and weenies" or "turkey noodle loaf" for breakfast. Somehow the hamburger patties always tasted like they were packed in cosmoline. ( A variant of axle grease.)

    Edward I really like your idea that you can't comment until you have actually built the project and tested it. Most of the negative comments seem to come from individuals who are merely repeating "ghost stories".

    ReplyDelete
    Replies
    1. I was fond of the green fried eggs in the C rations. Umm, delicious. Especially cold on a cold night.

      Delete
  5. I think I would be a little more careful before I anounced to the world that I was looking for "magic white powder" ;-)

    I suspect I know what it was though. It was probably Calcium Hydride https://goo.gl/6DZ7N3. It was used by the military in WWII to lift antennas for the Gibson Girl emergency radios https://goo.gl/nSVGN6. Catalogs from Fair Radio Sales is where I learned about this https://goo.gl/7kSNN3. Unfortunately they seem to be out now but at least that listing identifies the chemical used. I didn't find a whole lot of sources in a Google search but I did find one http://goo.gl/0DLw9b

    Good luck!

    ReplyDelete
    Replies
    1. Thanks Leif! You may have just made ham radio (and boating!) significantly more dangerous!

      Delete
    2. Hi Pete and Bill

      Number 179 was a great edition of Soldersmoke, thanks for all these years. I have to say, i think the lexicon you outline came up a bit short however. I think Pete's term "noodling", or is it "Knudeling" or even "nuudling" should have a place in the lexicon. After all the more Noodling the less Basta.

      73
      Dave, K1KA

      Delete

Designer: Douglas Bowman | Dimodifikasi oleh Abdul Munir Original Posting Rounders 3 Column