Podcasting since 2005! Listen to Latest SolderSmoke

Showing posts with label Raspberry Pi. Show all posts
Showing posts with label Raspberry Pi. Show all posts

Friday, April 1, 2016

A Major Change For SolderSmoke: Introducing the WireWrapRap Podcast!


A New Direction for SolderSmoke
Introducing Our New Podcast:  “WireWrapRap”


Attentive listeners have probably noticed that for some time now the podcast has been drifting in a new direction.  Some have been concerned by this change.  I myself, as you know, have shared in many of these misgivings.   But I have become convinced that it is time for a major change in direction.  We've been doing this for more than ten years -- we are one of the oldest ham radio podcasts.  It is time for a change.
A number of people have encouraged me to make to this change.   My co-host Pete Juliano N6QW is clearly the main influence.  Pete has made me see the errors of my Ludite ways.  He taught me that it is time to put away the Dymo tape and get with it with glowing numerals.  Whenever I started getting enthused about VXOs or about Permeability Tuned Oscillators using brass screws moving through hand-wound coils, Pete was there to remind me of the beauty, simplicity, and efficiency of Arduino Microcontrollers and Si5351 chips.   Paul Darlington M0XPD contributed an element of old world legitimacy to this push for modernity. Tom Hall AK2B was another influence -- whenever I was on the verge of quitting, he’d Skype in from the Big Apple and get me back on the digital track.  And we can’t forget Farhan over in India – as soon as he started putting Arduinos and Si570s in his Minima, I knew this was really, as the kids say, “a thing.”
So anyway, it is time for a change.    I know many of you may find this shocking, so it is probably best for me to just go ahead and say it:  We are changing the name of the podcast and we are changing its focus.
n  Instead of SolderSmoke, the new name will be “WireWrapRap.”   Wire wrap is the solder-less wiring technique often used in computer circuitry.  We hope that the “Rap” thing will be especially helpful in attracting young people – especially those Maker Millennials -- to the show.  And, you know, soldering just seems so 20th century.     

n  Instead of traditional homebrew radio, the show will be focused on Mini Computers (especially the Raspberry Pi), Software Defined Radio, Digital Signal Processing, Microcontrollers (especially the Arduino), and the use of smart phones in ham radio
n  Obviously this implies a move away from minimalist radio and QRP.  So yes, we are going maximalist and we are going QRO. And we are getting more involved in contesting (see below).  

Now I know what some of you are thinking – that this must be part of our long-standing quest for sponsorship and that this is all about money.  But that’s only part of it.  Yes, we have secured a lucrative sponsorship arrangement with a company involved in microcontrollers, small computers and smart phones that is focused on the millennial market.  But we’re really doing this for the good of our listeners. 
Don’t worry, you will find many of your favorite parts of SolderSmoke in the new show.  They will be the same, only different.   For example, instead of the “Bandsweep” segments that we used to do, now we are going to have “Codesweep”  (and it’s not about Morse).  Where we used to have SolderSmoke Mailbag, well, don’t worry -- we are going to continue to have a segment that will allow for listener input.  We going to call it “Pi Hole.”  We’ll only be accepting listener input via TEXT messages or Tweets – we are, after all, trying to be modern.  Along the same lines, we will be distributing the podcast exclusively via Soundcloud.  So get with it gentlemen! Get into the cloud!
In the new and improved podcast we want to explore the new and exciting digital modes.  We plan segments on all the new ones: PSK-99, Opera, WSPR, SNICKR, Throb, Thor, Piccolo, Oreo, Oregano,  you know, all those weird sounds you’ve been hearing near what used to be considered the CW portion of the band.  It will be such fun!  I can’t wait to decode some Oregano!
Smart phones, are, of course, the future of ham radio, and we intend to be fully into those little magic boxes.  I don’t know if you guys realize it, but all of that ugly dusty junk in your shack can be replaced by a few lines of code from the App Store.  That room you used to call “the shack” can be converted into the Yoga studio or knitting room that your wife has been longing for!  Now you can carry your station with you wherever you go and autonomously participate in contests from stations around the world.  Imagine the thrill of learning that while you were playing golf or bowling, you were also WINNING a major DX contest from a “station” in Ulan Bator. And that ALL of your reports were 59!   It’s like owning your own ham radio drone!  Congrats old man.  YOU WON! Welcome to the 21st century! That’s the kind of operation we are going to explore on WireWrapRap!
For those of you who are worrying that we might be abandoning our microphones, have no fear my friends, Pete and I remain committed phone operators. Only now, it will be DIGITAL VOICE.   We’ll be squeezing our dulcet tones into a mere 800 Hz of bandwidth.  This way we both sound exactly the same.  Heck with this new technology everybody will sounds the same.  How cool is that!   We’ll all sound like a mix of Stephen Hawking’s synthesizer, Apple’s Siri, and MTV's Max Headroom.   The AM guys and the Enhanced SSB crew may need some time to get used to this, but c’mon fellas, it is time to get with it!  There will be no more need to tweak all those menus for “presence” and “brightness” and “mid-range.”   Heck no, we’ll all sound the same!  Progress my friends, PROGRESS!
As I said, I had my doubts about this.  But over the weekend I walked into the TV room and Elisa happened to be watching one of those “inspirational self-help” speakers on Direct TV, and you know what?  He made a lot of sense. Change IS good!  We have to EMBRACE the future!  Impossible = “I’m possible!”  Yea!  So thank you Deepak Chopra!  Thank you Pete Juliano!  And welcome --  all of you -- to the WireWrapRap!

Sunday, December 20, 2015

SolderSmoke Podcast #183 Pete's B'day, Simple-Ceivers, Binaural Bliss, 160 or Bust, GOOD BEHAVIOR, MAILBAG

Bill's Frankenstein R2 receives 7 MHz signal and generates I and Q outputs

SolderSmoke Podcast #183 is available. And it is GOOD!

http://soldersmoke.com/soldersmoke183.mp3

20 December 2015

-- Foxes in the Backyard
-- Pete completes another orbit
-- Simple-ceiver Success!
-- Frankenstein Receiver: IT IS ALIVE!  AND BINAURAL!!!
-- 160 Meter AM OR BUST!
-- Fun on 40 AM -- Lots of Multi Elmac AF-67s!  Who knew!
-- The Amateur's Code, and violations thereof.
-- Negative Frequencies? I don't think so.
-- Capacitor Offer from our Secret Benefactor: EXPANDED ELIGIBILITY
-- Projects for 2016: Pete goes Raspberry Pi, Bill goes DX-100
Mailbag:
-- Croation Creation
-- Salvadoran 2B
-- N3FJZ's Homebrew QSL
-- WA7HRG's LBS-ZIA-Simple-Ceiver Mashup Rig
-- KC0IZR turning VCRs into Mighty Mites in NOVA
-- AB1YK Starting with DC RX, going BITX
-- G8GNR puts Mighty Mite on AM!
-- G3ZPF Modulates THE SUN (Amazing)
-- VK3YE's Simple Superhet
-- Grayson in Turkey drools over KG7TR's Octalmania
-- N7REP reaches for the Zantac because of Arduinos and Surface Mount
       

Saturday, November 21, 2015

SolderSmoke Podcast 182: Bears! MMM Update, On Pete's Bench, 160 AM Dreams, MAILBAG


20151116_091050[1]
N6QW Selfie
SolderSmoke Podcast #182 is available


Travelogue:  In Shenandoah with BEARS!

Michigan Mighty Mite Update and a Generous Offer (with conditions).

BENCH REPORT:
-- Pete's Ten Tec Conversion using LTSpice
-- Pete's Simple-ceiver
-- My CB to 10 conversion plans

DREAMS OF 160 METER AM:   KB3SII, N2CQR, N6QW Building for Top Band

Raspberry Pi Nightmares

Homebrew to Homebrew (HB2HB) Contacts

Elser Mathes Cup -- We have some competition!

QST, "The Radio Art,"  and The Channelization of HF Bands

WA5BDU Nick Kennedy on QSO Today  Podcast

Ed Walker of "The Big Broadcast" was a ham:  N3HFT

MAILBAG:  A Letter from Turkey: Tubes and R-390s
Si5351:  G4GXO says give it a go!


Thursday, November 5, 2015

Nightmare Turns Real: "Rig Here is a Raspberry Pi OM, and I'm listening to you with my Dongle..."


As with many other nightmarish things, this one was launched at the world on Halloween. It all seems a bit flaky, but we knew this was coming.  Don't complain to me about the lack of low-pass filters, SSB testing on 7.000 MHz,  or the rather nebulous identity of the creator.... I'm just the messenger here.  And remember that I am a HARDWARE Defined Radio,  Discrete Component,  "Menus are for Restaurants" and (now) "Pi's are for eating" kind of ham. 
Here it is:
 

Tuesday, April 16, 2013

Adventures with Small Computers


 
I've succumbed to the lure of the tiny computers and microprocessors.  This weekend I was playing with the Arduino that I bought (supposedly) for Billy.   You see, I have a little microprocessor-based keyer in my ten meter beacon rig (Demaw's "Lil'Slugger") .   It works fine once you get the desired Morse sequence into it, but getting that done is difficult and frustrating for someone (like me) unaccustomed to an iambic keyer.   So I was thinking that this would be easier just to replace the keyer with  an Arduino.  I was right.    With some help and advice from Billy, I got the Arduino going, and got the little LED blinking.   Then I took some code from Mark K6HX, modified it for my call-sign, and loaded it into the Arduino.  No problem at all.  Kind of fun.  And it opens your eyes to all the possible applications of this little board. 
 
Unfortunately, in the course of fooling around with the interface between the board and my rig I think I did damage to my Arduino.  I managed to blow out the blinking (pin 13) LED on the board.  I could live without that, but now the ICs get very hot (especially the little surface mount chip just below the 16 MHz crystal).   Anyone hope of fixing this?  (I've already ordered a replacement board,  but I feel guilty about this.)
 
Here's a good article describing the pros and cons of Arduino, Raspberry Pi and Beagle Bone:
 
http://blog.makezine.com/2013/04/15/arduino-uno-vs-beaglebone-vs-raspberry-pi/ 

Our book: "SolderSmoke -- Global Adventures in Wireless Electronics" http://soldersmoke.com/book.htm Our coffee mugs, T-Shirts, bumper stickers: http://www.cafepress.com/SolderSmoke Our Book Store: http://astore.amazon.com/contracross-20

Wednesday, March 20, 2013

Wow! Raspberry Pi as an RF Transmitter


https://github.com/threeme3/WsprryPi

This site shows you how to use a $35 Raspberry Pi Computer as an RF transmitter for the WSPR (Weak Signal Propagation Reporting) System.  All you need is a simple low pass filter and an antenna. (Oh yea, and a ham radio license.)  The site says you can get 10 milliwatts out.  That's enough for WSPR!   Very cool. 

This looks like a real international effort:

Credits goes to Oliver Mattos and Oskar Weigl who implemented PiFM [1]  based on the idea of exploiting RPi DPLL as FM transmitter. Dan MD1CLV combined this effort with WSPR encoding algorithm from F8CHK, resulting  in WsprryPi a WSPR beacon for LF and MF bands. Guido PE1NNZ extended this effort with DMA based PWM modulation of fractional divider that was  part of PiFM, allowing to operate the WSPR beacon also on HF and VHF bands.

For more info on WSPR:  http://soldersmoke.blogspot.com/search/label/WSPR

Our book: "SolderSmoke -- Global Adventures in Wireless Electronics" http://soldersmoke.com/book.htm Our coffee mugs, T-Shirts, bumper stickers: http://www.cafepress.com/SolderSmoke Our Book Store: http://astore.amazon.com/contracross-20

Friday, January 25, 2013

The Raspberry e-Bay Multi-Mode Beacon of M0XPD


From: Paul Darlington 
Subject: Multi-mode QRSS beacon on the Raspberry Pi
To: "Bill Meara" 
Date: Sunday, January 20, 2013, 8:32 AM

Hi Bill

Inspired by recent comment on your SolderSmoke blog, I got myself a DDS module from eBay.

Today I lashed it up to my new Raspberry Pi and now have CW and Hellschreiber pumping out on 40m.

I hope others will forgive my greedy use of the spectrum in transmitting "m0xpd :- Raspberry Pi" in Hellschreiber.


73 de Paul, m0xpd


http://m0xpd.blogspot.co.uk/2013/01/multi-mode-beacon-on-rpi.html




Our book: "SolderSmoke -- Global Adventures in Wireless Electronics" http://soldersmoke.com/book.htm Our coffee mugs, T-Shirts, bumper stickers: http://www.cafepress.com/SolderSmoke Our Book Store: http://astore.amazon.com/contracross-20

Sunday, January 6, 2013

Move over Altoids Tins! Legos for Raspberry Pi Case

Too bad the Raspberry Pi board is a bit too big for our beloved Altoids tins.  It would have been a very fitting match:  British board in a British box.   A twelve year-old has solved the problem with Legos:  http://blog.makezine.com/2012/06/11/lego-raspberry-pi-enclosure/
Will this lead to raids on the toy boxes of the grandchildren of SolderSmoke fans? 
Billy's RasPi is running nicely (but no Legos for him).   

Our book: "SolderSmoke -- Global Adventures in Wireless Electronics" http://soldersmoke.com/book.htm Our coffee mugs, T-Shirts, bumper stickers: http://www.cafepress.com/SolderSmoke Our Book Store: http://astore.amazon.com/contracross-20
Designer: Douglas Bowman | Dimodifikasi oleh Abdul Munir Original Posting Rounders 3 Column