SolderSmoke Podcast #241 Mars, Direct Conversion, PTOs and Glue Sticks, Anniversary of the BITX20, Multus Proficio SDR, Boatanchor Station, MAILBAG

The board I use to test DC RX circuits 

SolderSmoke Podcast #241 is available

Audio (podcast):  http://soldersmoke.com/soldersmoke241.mp3

Video (YouTube): (215) SolderSmoke Podcast #241 October 28, 2022 - YouTube

Introduction:

Back on Mars.  Opposition approaching.  I have a Mars filter.  And (like T.O.M.) a Mars globe. 

N2CQR DXCC done

SolderSmoke in the WayBack Machine

Sticker news

PARTS CANDY -- Don't Scrimp with a Crimp! 

Bill's Bench

School DC RX projects -- in Hyderabad and Northern Virginia. 

Direct Conversion Receivers -- Keeping it Simple, Learning a Lot.  A step beyond the Michigan Mighty Mite. Do we really need 100db?  Do we really need to shield VFOs?  Farhan's super-simple and stable Colpitts PTO.  Audio amps, 1000-8 transformers and rolling your own LM386

PTOs and Glue Stick PTOs.  Paul Clark WA1MAC. Brass vs. Steel bolts.  #20 thread vs. #28 thread.  Backlash Blues. The best Glue Sticks. 

2 meters and the VWS.  Bill has a Baofeng. 

SHAMELESS COMMERCE:  MOSTLY DIY RF

Pete's Bench

20th Anniversary of the BITX20   Pete's early BITX rigs. 

Computer Woes

The Multus Proficio SDR rig

Simple SSB in China  BA7LNN

Things of beauty: Tempo One, NCX-3 and a SBE-33

MAILBAG

-- NS7V is listening.

-- Graham G3MFJ sent SPRAT on a stick.

-- Nick M0NTV  FB Glue Stick and 17 Shelf videos.

-- Dino KL0S HP8640 Junior

-- Mark AA7TA   Read the SolderSmoke Book

-- Steve EI5DD Connaught (Ireland) Regional News

-- Dave K8WPE  Planting the seeds of ham radio interest

-- Peter VK3YE Ruler idea on PTO frequency readout

-- Michael AG5VG Glue Stick PTO

-- Tobias  A polymath with UK and Italy connections.  And cool tattoos.

-- Alain F4EIT   French DC receiver

-- Michael S.  was in USMC, working on PCM/TDM gear

-- Alan Yates writes up Amazon transformer problem

-- Todd VE7BPO,  Dale W4OP, Wes W7ZOI

-- Farhan VU2ESE sent me an sBITX

-- Todd K7TFC   The Revenge of Analog

-- Jim Olds    Building QRP HB gear  

The Multus SDR rig Pete discussed

The older rigs Pete mentioned

My version of DC RX that Farhan is working on

My PTO with VK3YE's ruler frequency readout

SolderSmoke FOREVER! Archived in the WayBack Machine

 

There were recently some stories about an effort to put on the Internet Archive recordings and other material from the history of ham radio.  I am pleased to report that the SolderSmoke podcasts have been included in the new collection: 

https://archive.org/details/soldersmoke-podcast

They also archived the recordings of my contacts with the MIR space station (and other spacecraft) from the Dominican Republic in the mid 1990s: 

https://archive.org/details/MIR-shuttle-audio

I have also suggested that they find a way to archive all of Jean Shepherd's recordings about ham radio. 

Thanks to Kay K6KJN for putting our material into the archive. 

Video version of SolderSmoke Podcast #240

Show notes appear in blog post below. 

I had some technical problems that caused audio distortion, but we talked about so much good stuff that I decided to go ahead and post the podcast.  We can't let the perfect be the enemy of the good enough. 

Thanks again to Pete Juliano for his willingness to use a big chunk of his very limited free time. 

SolderSmoke Podcast #240 NIMCELS? Hex DX, CBLA RX, PTO? Solid State HT-37? Exotic caps, Benches, SBE-33, TenTec 540, KWM-1 MAILBAG

 

SolderSmoke #240 

Monday September 19, 2022

http://soldersmoke.com/soldersmoke240.mp3

Sorry, I had some technical difficulties so my audio is a bit distorted. 

NIMCELS?  Niche Internet Micro Celebrities. I dunno....  Can our listeners come up with an acronym that describes our place in the universe?  

Sponsors:  Parts Candy.  Carlos in Chicago.  Great leads.  Don't scrimp with a crimp!  You need some good quality test leads on your workbench.   Get yours from Carlos.  Click on the picture on the blog page or go to PartsCandy on e-bay.  

"Techno Wizardry"?   Our lawyers at Dewey Cheatham and Howe will be after them for that!  

Bill's Bench: 

Hex Beam has made me a DXer.  91 countries. Having fun. Mozambique (Long path), San Andres island, and Saudi Arabia, all on Friday. All homebrew SSB 100 watts. 

Put my old 20 meter CW station back on the air:  Barebones superhet and the VXO 6 watter.   WYKSYCDS. This may be one of very few CBLA Receivers in the world!

Been getting active in the Vienna Wireless Society.  Dean KK4DAS is President and a lot is happening in the Club.  Makers group. Lunch with the group on Tuesdays.  Lots of fun.

We are looking at Farhan’s Daylight Again Analog rig.  Using parts from Dean’s 3D printer, we have made PTOs. See blog post for picture.   (But are they really PTOs? Or just Variable Inductors?) 

VFO madness.  Solid stating an HT-37 VFO. Grayson: “You have clearly lost your mind.” Perhaps.  100 MHz FM broadcast RFI. This brought me to capacitors and linear tuning:

SLC, SLW, SLF and Midline/Centerline caps.  Do special caps explain why some VFOs have linear tuning while others do not?  NO, not really.  You can get linear tuning with ordinary caps.  See blog post

Working on the bench.  Reading Adam Savage’s book on workshops and tools. (link to the book in the right hand column of the blog.   Some other workbench links on the blog.  Upgrading tools and test gear.  I have a proper bench power supply. Better side cutters.  Engineering rulers.  Digital calipers. Better solder (I was talking to Ron WA6YOU – a real solder authority - about this.  Kester 60/40 ).

SHAMELESS COMMERCE DIVISION: 

mostlydiyrf.com

Currently offering seven items:

·  UDVBM-1 (in three versions)

·  PG-TIA Broadband IF Amplifier

·  TIA-AGC IF Amplifier

·  Dual-Gate MOSFETs

·  OA741D Op-Amp (discrete components)

·  8-Pole QER Crystal Filter

·  I2C Rotary Encoder

Three more are shown as coming soon:

·  GP Audio Amp (general-purpose audio amp)

·  HyCas IF Amplifier with AGC

·  M-Cubed (Michigan Mighty Mite kit)

·         Mostly DIY RF offers hardware for hardware-defined radio. That's not a comment on software-defined radio. SDR is cool and useful, and it has its place.

·         In fact, I believe in explicitly making use of technology from all eras (vacuum tubes, discrete semiconductors, and integrated circuits

·         What does "mostly" DIY mean? It means making what you want and using ready-made for the rest. Even the most fanatic DIY'ing home brewer does this without much thought. He uses components he didn't fabricate, electricity he didn't generate, and theoretical knowledge he didn't discover. One can't fight all battles, one has to choose which to fight and which to leave to others. If an appliance-operating Ham doesn't want to fight at all, that's okay, but Mostly DIY RF has nothing to offer him.

--------------

I need YouTube viewing hours.  So I am putting some of the best SolderSmoke podcasts up on the YouTube channel.  Please listen/watch on YouTube. Here is the playlist:  https://www.youtube.com/playlist?list=PLv9MEKq1quk-gnxog7eBqY_y7cpQadf6T   

Google feed no longer sending our e-mails.  So please follow the blog, Get yourself a blog feed reader.  I use Feedly.  It is free.   Download, search in Feedly for SolderSmoke, hit subscribe and you are done. https://feedly.com/i/discover Follow Pete’s blog too!  It is easy.

 Pete’s Bench

Resurrections: 

SBE-33!

TenTEC Model 540

KWM-1

Mailbag:

Dan KC5VPI getting into homebrewing. No longer WRONG!

Michael AG5VG built subharmonic DC receiver, put it on 40 and 20.  FB.

Mike AA9IL working on old tube stuff including a DX-100 AMD UUHF gear up to 122GHz.

Ed WA4MZS liked the SolderSmoke book. USCG vet.  As is Mike Rainey AA1TJ Semper Paratus!

Clint KA7OEI – The Music of the Beams – My Hex  does not sing!  So far!

Walter KA4KXX – The Knack started early.  Video of getting a toolbox for Christmas. And working on PTOs!  He likes them!

Phillip G4HOJ Also working with subharmonic mixers – using the more complex 4 diode version.

Peter GW4ZUA Built an amazing rig from RADCOM (1980s) Cool VFO with varactor fine tuning and a coil with a dust core that was cut in half to minimize temp effect. Box now holds 3  band version of Pete’s SimpleCeiver. FB.

Bruce KC1FSZ building 25 Watt amp for his Peppermint Bark rigs.  We won’t turn him in to the QRP authorities.

Grayson KJ7UM tested the 12BY7A from my DX-100 VFO.  It was in fact weak. Thanks Grayson.

Charles Smith KV4JT has some really interesting stuff on how to solid state tube gear.   Especially R-390s. https://soldersmoke.blogspot.com/2022/08/trigger-warning-solid-stating-old-tube.html

Gianfranco I0ZY Old friend from Rome.  Amplifier manufacturer.  FB.

Paul WA1MAC getting started again after long hiatus.

Vasily.. I mean Todd VE7BPO.  Always great tech info.  Thanks.

Mark WB8YMV building a superhet with a 455 kc IF.

I sent Farhan some comments on his Daylight Again video: He wrote back “I marvel at their stamina to watch an hour long video of a man talking with a funny accent!”  

SolderSmoke (Old Smoke) Podcast #103 -- March 15, 2009 -- From Rome -- QRSS, Knights and Wizards, LTSpice, and an Echolink QSO with Jeff KO7M (the guy with the Piper Cub)

 15 March 2009 

Beware the Ides of March! 
Ostia Beach and Ostia Antica
248 Knights of QRSS. And Wizards! 
ET Phones Home (with QRSS?) 
Possible new grabbers in VK6 and Dubai
Telescope, Satellites... 
REAL QRP QSOs on 80 and 40
Saving an old Toshiba Laptop
ECHO-QSO WITH JEFF, KO7M: 
-- Piper Cubs and MFJ Cubs
-- Satellite QSOs 
-- LT Spice and test gear
MAILBAG: 
Gene W3PM listens from QE2, HB WSPR rig
Jim AL7V sending parts for my W3PM rig
Jim AB3CV's color burst Gnat
Jason NT7S on Tektronix guys and SolderSmoke
Kevin ZL3KE on old computers
Paul M1CNK's DDS 30-based QRSS beacon
Soeren OZ2DAK on exercise bikes to power beacons

An Especially Good (Old) SolderSmoke Podcast

February 22, 2008    

-- We were in Rome.  

-- I read a 1931 QST ad sent to me by my fellow "Hambassador" David Cowhig, WA1LBP; David was in Okinawa when he sent it. 

-- I describe Wes Hayward's comments about Pat Hawker, G3VA. 

-- I talk about getting on the air with my HW-8 (after fixing it!), re-tubing my Drake 2-B, and putting up a 30AWG antenna in Rome. 

-- I describe meeting up with Roman hams (including amplifier manufacturer I0ZY!) and visiting the local radio club.

-- The Science Museum in Florence, Italy. 

-- DSB from Rome with my NE602 rig. 

-- Tony Fishpool and Graham Firth's Test Gear book. 

-- An important corollary to Murphy's Law. 

-- Listening to SolderSmoke from safari, under the Southern Cross in South Africa. 

-- Ron Sparks calls in from Dubai. 

You can put on a playlist of all the SolderSmoke podcasts here: 

(12) Videos of the SolderSmoke Podcast - YouTube

 

SolderSmoke Podcast #73 Jan 2, 2008 -- AA1TJ Circuits and Poetry, Mixers, CW, Straight Key Night at WA6ARA, Boatanchors in South Africa with ZS6ADY (Part 1)

This is the first in a series of four podcast that include Echolink conversations with Andy ZS6ADY about old tube radios (boatanchors) in South Africa.  Click on the YouTube link above to listen. 

January 2, 2008 SPECIAL NEW YEAR'S EDITION AA1TJ's circuitry and poetry. Homemade tubes. Book Review "Early Radio" by Peter Jensen. The Vatican's antennas. Google Earth flight simulator. Mixer madness continues (now in LTSpice). Mars-asteroid collision? Bollywood: The BITX-20 connection. BANDSWEEP: Straight Key Night at WA6ARA. ECHO-GUEST: Andy, ZS6ADY, South African Boatanchor fan. MAILBAG: Jake N4UY(NOVA QRP), Steve G0FUE (Bath Build-a-thon), Nigel M0NDE

SolderSmoke Podcast #156 -- November 4, 2013 -- Interview with Peter Parker VK3YE of Melbourne, Australia

November 4, 2013
Special hour-long interview with Peter Parker, VK3YE
-- Early experiences with radio
-- CW
-- DSB Gear
-- Simple gear, and gear that is TOO simple
-- VXOs, Super VXOs and Ceramic Resonators
-- Building receivers
-- Chips vs. Discrete
-- Making the leap to SSB
-- The Knob-less wonder and the BITX
-- No need for a sophisticated workshop
-- Advice for new phone QRPers

Peter's Blog: https://vk3ye.com/

Peter's YouTube Channel:  https://www.youtube.com/user/vk3ye/featured

Mike Caughran KL7R's Last Podcast

 

Mike KL7R (SK) during a visit to the AL7FS shack.

This was Mike Caughran KL7R's last podcast. He died in a car accident shortly after we made this program. January 13, 2007. Mike's oscillator work. Michigan Mighty Mite. Lasers, diodes, and Einstein. Laser communication experiment. W7ZOI-KL7R QSO on SKN.M0HBR's feedback amps.The new comet. Saturn, Jupiter and calculation of c. 17 meter QSOs. New SPRAT CD. MAILBAG: China enigma, VE4KEH, M0DAD, GU0SUP, M1CNK, K4AHU, KD4EDM, KG9DK, AA6KI, VA7AT ON5EX

---------------------

Mike's Obituary from the February 2007 ARRL Letter:

Mike Caughran, KL7R, SK: Well-known low-power (QRP) and homebrewing
enthusiast Michael S. "Mike" Caughran, KL7R, of Juneau, Alaska, died January
22 of injuries suffered in an automobile accident in Hawaii. He was 51.
Caughran may be best known as one-half of the team -- with Bill Meara,
N2CQR/M0HBR -- that created and produced the weekly SolderSmoke podcast
<http://www.soldersmoke.com/>. "I think people were drawn in by Mike's
friendly voice and manner," Meara commented on a memorial page for KL7R
<https://kiwi.state.ak.us/display/mc/Home>. A member of ARRL and the Juneau
Amateur Radio Club, Caughran also wrote articles for the Michigan QRP Club's
T5W newsletter and he was an active ham radio contester. "Mike was one of
those people who you instantly like because of his honest, straightforward
and humble way of talking and expressing ideas," said Mike Hall, WB8ICN, who
edits T5W. "His co-hosting of SolderSmoke provided me hours and hours of
enjoyment." Caughran was an IT professional with the State of Alaska.
Survivors include his wife and son.

On our 17th Anniversary: SolderSmoke Podcast #179 -- TENTH ANNIVERSARY SHOW -- A Walk Down Memory Lane

On August 21, 2005 Podcast #1 was uploaded to our old GeoCities host. Just prior to that Mike KL7R set up a Yahoo Mail account.  I still use it. Yahoo sent me an e-birthday card! 

I put our 10th Anniversary Podcast on the YouTube Channel today.  Click above. Show notes below 

---------------------------------

22 August 2015

YESTERDAY MARKED 10 YEARS OF THE SOLDERSMOKE PODCAST
-- A clip: The first minutes of SolderSmoke #1
-- A trip down SolderSmoke memory lane.
-- The SolderSmoke lexicon -- words and phrases we use (a lot).

BENCH REPORT

-- Pete's antenna project.
-- Pete's new Blog: http://n6qw.blogspot.com
-- Bill's big amplifier problem fixed thanks to Allison KB1GMX.
-- Six digit freq readout with an Altoids case.

THE Si5351 PHASE NOISE CONTROVERSY

-- ALL oscillators make noise.
-- Keeping things in perspective: It is 100 db down!
-- Observations and tests from LA3PNA, NT7S, and K0WFS:
http://k0wfs.com/2015/08/21/si5351-phase-noise-and-thd-tests-using-an-agilent-e4402b-spectrum-analyzer/

http://nt7s.com/2014/11/si5351a-investigations-part-7/

-- Try it, you'll like it! The benefits trying things on real rigs.

NEWS
Interviews on "QSO TODAY" with Eric 4Z1UG.
Horrible band conditions.
Looking at Saturn with telescope.

MAILBAG

Another recruit for the CBLA: Paul KA5WPL.
Ron G4GXO on Bell-Thorn and Eden9 SSB rigs.
Rupert G6HVY on Kon Tiki radio and Mr. Spock.
Mikele's Croation BITX rigs.
Dean AC9JQ's TIA.
Bryan KV4ZS will build an LBS receiver.
Dave Anderson give Pete good antenna advice.
Steve Smith moves in from the garage.
Pete has built 12 SSB transceivers. Intervention time?

------------------

SolderSmoke's 2006 Interview with Farhan (and pictures from his 2019 visit)

Farhan in N2CQR shack with ET-2 on bench

October 2019

Here is the YouTube version of the SolderSmoke Podcast #34

 https://youtu.be/q-L4IE9f1aA

Farhan with Bob Bruninga WB4APR (SK) 

https://www.qrz.com/db/WB4APR

With Bill and Abe Lincoln

With Einstein

Correcting an Einstein equation

With Elisa

Tuning Bill's BITX 20

Pete N6QW's First SolderSmoke Podcast

May 26, 2014. Pete Juliano's first SolderSmoke podcast. I think we both thought that this would be a one-time appearance. But one show led to another and soon we were in a permanent podcast collaboration. This was a very fortunate development, for me, for the podcast, for all our listeners, and for ham radio. Thanks Pete!

A Blast from the Past: The First SolderSmoke Podcast

I am gradually -- maybe one every few days -- going to put older SolderSmoke podcasts up on the YouTube channel.  Here is SolderSmoke Podcast #1.  This podcast was first uploaded on August 21, 2005. 

Be sure to check out the new Playlists on the SolderSmoke YouTube channel: 

(22) SolderSmoke - YouTube 

Thanks to Ciprian YO6DXE for the wallpaper!  And thanks to Dave K8WPE for the idea of reposting "Old Smoke." 

Video of SolderSmoke Podcast #239

Link to audio Podcast and notes on the episode: 

 https://soldersmoke.blogspot.com/2022/08/soldersmoke-podcast-239-hex-dx-vfo-temp.html

SolderSmoke Podcast #239: Hex DX, VFO Temp Comp, DC RX, Polyakov!, DX-100, Wireless Set, Farhan's "Daylight Again" HDR rig, MAILBAG

N2CQR Hex Beam Aimed at Europe

SolderSmoke #239 is available for download: 

http://soldersmoke.com/soldersmoke239.mp3

TRAVELOGUE: 

James Webb Space Telescope.  Mars returning to opposition in early December.   

BILL'S BENCH

Hex Beam K4KIO - on roof – TV Rotor – 20-17-12  Lots of fun.  Working Japan regularly, Australia, South Africa on long path 17,000 miles.  52 countries SSB since July 11.

VFOs and Temp stabilization.  Dean KK4DAS found my ceramic resonator VFO for DC receiver drifty. He was right.  So I built a real LC Colpitts VFO.  Got me into temp stabilization.  A new hobby!  An obsession.  HT-37 and Ht-32 parts. Ovens?  WU2D’s second VFO video.  Understanding thermal drift and how to address it. Split stator caps.  Cut and try.  

Built a Polyakov DC Receiver. https://soldersmoke.blogspot.com/2010/03/polyakov-plus-dual-band-receiver-with.html  Lauser Plus.  Lauser = Imp or Young Rascal!  DK2RS.  He used a ceramic Resonator VXO at 3.58 MHz.   Mine works great on 40 with VFO running 3.5 -- 3.65 MHz. See schematic below. 

On 40 AM with DX-100 and MMMRX.  DX-100 died.  12BY7 VFO buffer went bad.  How common is failure in this tube type?  Nice QSO with Tim WA1HLR about the DX-100.

Got my Dominican license:  HI7/N2CQR!  SSSS on the way.   Thanks to Radio Club Dominicano and INDOTEL.

Getting more active in the Vienna Wireless Society.  

BOOK REVIEW:  

"The History of the Universe in 21 Stars” by Giles Sparrow.  Written during the pandemic.  Published by Welbeck, in London. https://www.amazon.com/History-Universe-21-Stars-imposters/dp/1787394654  Also:  From “Atoms to Amperes” by F.A. Wilson available for download.  See blog.

SHAMELESS COMMERCE DIVISION:   

Todd K7TFC getting ready to launch “Mostly DIY RF.”   I used his TIA boards in my 1712 rig.  He will have boards like this and much more.  Stay tuned.

I need more viewers on YouTube.  They want 4,000 hours IN A CALENDAR YEAR!  Please watch!

FARHAN’S NEW “DAYLIGHT AGAIN” RIG.  Analog.  VFO.   Comments, observations. We need to get him on the podcast.  Maybe two shows: SDR and HDR. 

PETE'S BENCH

Time very limited. But still sharing lots of tribal wisdom.

Wireless set with tubes!

Tool recommendation – Air compressor

 MAILBAG:

Farhan VU2ESE – Speaking of big antennas “Whenever I look at the huge construction cranes in Hyderabad, I always think how one could make 160m, 4 element yagi using it as a boom..”

Todd K7TFC in Spain, spotting Log Periodics in Madrid.

Andreas DL1AJG:  Can Biologists fix Radios?

Janis AB2RA Wireless Girl.  Expert on Hammarlunds.  And was my first contact with the Tuna Tin 2. She too was HB!

Peter Parker VK3YE on Owen Duffy VK1OD

Lex PH2LB on homebrew radio

Would this really be homebrew?  Mail from H-A-D article on FM receiver

F4IET a DSB rig from France

Ciprian got his ticket YO6DXE    

Josh G3MOT sent us a good video about the Vanguard satellite and IGY.

Dave Wilcox K8WPE bought Chuck Penson’s Heathkit book.

Rogier -- So many great articles and links from PA1ZZ

Bill AH6FC  Aloha. Retiring.  Wants to build.  Mahalo!

Grayson KJ7UM  Working on an Si5351.  Gasp.

Mike KE0TPE viewing YouTube while monitoring 6 meters.   He will have a lot of time to watch!

Chris KD4PBJ spotted Don KM4UDX from VWS FB

Mark WB8YMV building a superhet.  Having trouble with 455 kc IF can filter.

Walter KA4KXX Great comment on the Daylight Again rig. 

Ramakrishnan Now VU2JXN was VU3RDD.  Found lost Kindle with SolderSmoke book on it. Building SDR rig from junk box.  Trouble with the LM386. 

Pete, Farhan and Tony:  Shelves of Shame

Daylight Again by Farhan

The Polyakov receiver I built yesterday (from SPRAT 110, 2002!)

Video of SolderSmoke #238

For details and audio podcast see: 

https://soldersmoke.blogspot.com/2022/06/soldersmoke-podcast-238-solder-smoke.html

SolderSmoke Podcast #238 -- SolderSmoke Shack South, Cycle 25, Chiquita Banana Radio, RCA, HQ-100, Mate Mighty Midget, Sony SWL RX , Mailbag

SolderSmoke Podcast #238 is available:  http://soldersmoke.com/soldersmoke238.mp3

TRAVELOGUE:  

Cathartic decluttering:  Bill preparing for future winter travel to Dominican Republic.  Will build SolderSmoke Shack South.  Dividing everything up:  Rigs, parts, tools, supplies, antennas, test gear.  Everything.  

OUR SPONSOR:  Parts Candy.  

https://www.ebay.com/usr/partscandy  Premium quality test leads! Hand cut, hand crimped, hand soldered, these will become your new favorite test leads GUARANTEED!

PETE'S BENCH:

-- Cycle 25 better? – Out here on the left coast – it is not evident

-- Chiquita Banana and the US Navy in early ‘wireless” operations.  Why RCA was created by the US Navy in 1919.

-- Update on the MAX2870 –someone has written the code to make it work with the Raspberry Pi and the QUISK SDR software

-- Field Day prep

SHAMELESS COMMERCE DIVISION:

 

Bill needs your help:  

-- Please watch his YouTube videos.  The longer the better!  Success based on hours watched. Great to have on while you are working in the shack. Just go to YouTube and search for the SolderSmoke channel. Or:  SolderSmoke - YouTube

-- Please put links to the SolderSmoke blog on your websites and blogs. 

-- How to USE the SolderSmoke Blog: Propagation, shopping, other sites... 

-- Please put comments under the articles on the SolderSmoke blog.  We like comments and dialogue. 

BILL'S BENCH:

-- Repair of the Sony ICF SW1 shortwave receiver.  Bad electrolytics.  Number Station receiving device? 

-- HQ-100   Q-Multiplier. BFO Switch. AVC.  Noise Limiter limitations.  Dave K8WPE: Old Radio Lessons.

-- MMMRX: Detector circuit. Alignment. Muting. On the air (40 AM with DX-100) 

MAILBAG: 

-- Bob Crane W8SX -- Great interviews at FDIM. On the SolderSmoke Blog. Thanks Bob! 

-- Dave Bamford W2DAB -- Stickers on the Upper East Side of Manhattan.  FB Dave! 

-- Farhan VU2ESE:  LADPAC software now available through W7ZOI' site.  

-- Lex PH2LB: Stickers in a Netherlands pub.  

-- Dave K8WPE Michigan Mighty Mite links.  Old Smoke idea. On the SolderSmoke blog. 

-- Rich WB4TLM was in the electronics class of CF Rockey W9SCH. FB. 

-- Dean KK4DAS Working on  his dad's HQ-170A. VWS maker group on mixers. 

-- Grayson KJ7UM -- Mixology article in ER. 

-- Pete Eaton -- Farhan's new analog rig: Daylight again!  Standby for more info from Farhan. 

-- Will KI4POV New HB Al Fresco single conversion superhet.  FB. 

-- Alvin N5VZH. Shep's "I Libertine."  Yes.  I laughed, I cried,  It changed me. 

-- Chuck KF8TI.  Mr. Wizard!  

-- Steve N8NM on the mend after some routine maintenance. 

-- Ben AB4EN is listening and likes the podcast -- Thanks Ben. 

May 1939 QST

Video of SolderSmoke Podcast #237 (Audio in Previous Post)

SolderSmoke Podcast #237 is available: TV Show! No! W9YEI's 1939 TV. 1712 Rig. HQ-100. New SDR Rig and Book. JF3HZB's VFO Digital Dial. FIELD DAY! PSSST. MAILBAG

SolderSmoke podcast #237 is available:  http://soldersmoke.com/soldersmoke237.mp3

Travelogue -- New York City!  Stickers!
And about that trip to Los Angeles for the SolderSmoke Cable TV show... 

Well, it fit in well with SolderSmoke's UNFORGETTABLE appearance on the Oprah book club.
And TechieTatts? Daughter worried about listeners rushing to get tattoos -- A risk we were willing to take.

https://in.pinterest.com/padmakumar10/techie-tatts/

This episode is sponsored by PartsCandy.  GREAT test leads: https://www.ebay.com/usr/partscandy

Bill's Bench

Tracking down Johnny Anderson's 1939 or 1940 homebrew TV receiver.

https://soldersmoke.blogspot.com/search?q=Anderson
Working with Joh DL6ID.
Jean Shepherd's January 1973 description.
FlickLives web site and Steve Glazer W2SG have lots of info on Shep and his friends.
Internet allows us to look at TV articles that were being published.
We've concluded: Probably 1939 or 1940, using an RCA 913 1 inch CRT tube. 

Lots of ideas from IRE Journal, QST, and Gernsback magazines.
Quite an achievement! Amazing how much pre-war TV progress there was.  

17-12 rig
All boxed up and working DX!
Figured out how to display both 17 and 12 on the same LED. https://www.youtube.com/watch?v=kAmmFZyFu8w
Drain protector for speaker cover. Copper tape to cover horrible cabinet making.
I think I need a Hex Beam.

Hammarlund HQ-100
Needed some maintenance.
I started to look more closely at it.
Got the Q-Multiplier to work -- it really adds a lot on CW.
Makes me feel guilty about all the QF-1s...
Using the 100kc calibrator with a 455 kc crystal as a BFO,
keeping Q multiplier below oscillation point.
Moved the BFO switch to the front panel. Helps a lot.
Need to fix the S-meter AVC circuitry.
Much more sturdy than the S-38E.
S-38E 1957-61 $54.95 5 tubes.  AC/DC.
HQ-100 1956-60 $169  10 or 11 tubes.  Power supply,  regulator.
You get what you pay for.  

Pete's Bench

Jack Purdum and Al Peter's new SDR rig and book (featured on the SS blog Amazon ad).
JF3HZB's beautiful digi VFO.
Backpack antenna for Field Day?  
Pipsqueak Disaster -- Too simple?
Peashooter Eye Candy.
Build Something Different.

MAILBAG

James W0JKG CBLA -- Others are building MMM too!
SM4WWG // Jörgen  Wonderful message.  Joined GQRP.  No longer "wrong."
Dennis WC8C Libraries for Max2870 board.
Jack NG2E  Progress on the Right to Repair movement. 
Jim K9JM  Someone cutting into our business with Solder candles!  
Chuck  WB9KZY Correctly identified the location of the IBEW sticker.  As did Dan Random.
Dave Bamford (who lives nearby) suitably impressed. 
Farhan wrote to us about a video on Don Lancaster.  Homebrew keyboards!  Yea!
Dean KK4DAS  QRP to the Field.  HB2HB 40 SSB   QRP  I feel virtuous.  
Todd K7TFC likes my ingenious use of the drain screen as the speaker protector on the 17-12 rig. 
Todd  had good thoughts on granular approach to homebrewing as seen in the Don Lancaster video.
Lex PH2LB HORRIFIED by my reverse polarity protection circuit.  This is a touchy subject! (as is WD-40!)
Rogier PA1ZZ sending great info on SWL and numbers stations.
Jesse N5JHH -- The guy who made the IBEW stickers -- Liked the NYC stickers. 
Steve N8NM has a new antenna article on his blog: https://n8nmsteve.blogspot.com/
Randy AB9GO Agrees -- Can't GIVE old 'scopes away. 
Dino SV1IRG Liked the 17-12 rig videos. 
Steve Hartley G0FUW Murphy's Law of Enclosures. 
Ralph AB1OP FB on the 17-12 Rig. 
Roberto XE1GXG --Our correspondent in Guadalajara. Petulant, irritable people on the computer scene.

Have some gear looking for a good home:   Tek 465 'scope from Jim AL7R W8NSA.   SBE Transceivers.  Windsor Signal Generator.  Let me know if you are interested and can either pick up or arrange shipping.  

John Anderson W9YEI Homebrew Hero

SolderSmoke Podcast #236 -- Bill's 17-12 Rig, Pea Shooter, VFO Wisdom, Temp Compensation, Need Code for Max2870, Making Enclosures, MAILBAG

ARC-5 R-23 Nav Receiver Parts

SolderSmoke Podcast #236 is available!

http://soldersmoke.com/soldersmoke236.mp3

Winterfest!  Many Boatanchors.  Lots of old good analog test gear.  Talk with Dean KK4DAS.  Met up with Armand WA1UQO and Charles AI4OT. 

Pete's Bench: 

-- Looking for help in software development for MAX2870 board.  

-- Tapped Capacitance Impedance Matching

-- The Pea Shooter (See N2USD's version in videos

 below).

-- Tribal Knowledge on Making Enclosures

Bill's Bench: 

-- 17-12 Band Imaging SSB Transceiver.  It works on both bands. 

-- Plan for Glowing Numerals (N6QW has been there and done that!)

-- WU2D's videos on VFOs.  

-- Temperature Compensation:  HT-37 capacitor.  FT-101 VFO,  even in the ARC-5 receiver! 

-- Trying to get more rigorous about receiver design.  Gain distribution, IMD, Dynamic Range, etc. 

-- Do I need a true RMS audio voltmeter?  Or can I get the same info from freeware audio spectrum analyzer and soundcard?

-- 6EA8s replace 6U8s in MMRX 

SHAMELESS COMMERCE DIVISION:   We have a sponsor!  

PARTS CANDY out of Chicago produces quality test leads for your bench.  The guy who runs the company is Carlos, and he is one of us.  He is an electronic tinkerer. See the ad on the left hand column of the SolderSmoke blog.  Just click on the picture of the test leads and you will be taken to Carlos's ebay store.  Go for it. 

Mailbag

Walter KA4KXX in Orlando -- Diodes in BITX Bilats -- Why?  Farhan says To prevent reverse junction of off transistor from conducting and clipping waveform. 

Tony G4WIF -- Audio test gear and G3ROO paraset

Todd K7TFC Pine boards, TIAs and 12 meters

Dean KK4DAS  Ceramic Variable Oscillators on 40.   Juliano Criteria? 

Mike WU2D   VFOs and Temp compensation. ARC-5s

Chris KD4PBJ   A really nice parts care package -- Thanks Chris! 

Steve M0ECS.  Inspired by SS, moved something off the Shelf or Box of Shame. 

Jason KD2RKN Building a DC receiver.  It is all our fault. 

Chris Mannon in Indiana joining the CBLA

KC4GMH is listening! 

Ed N2XDD has been armed with a 3.579 MHz crystal.  

Harvey Wa3EIB working on his museum 

Tim AG4RZ is BACK IN THE SOLDERSMOKE! 

Fred KC5RT -- an old friend -- recommends Bangood RF sig gen for 88 bucks. 

Shlomo 4X4LF listening and homebrewing from a Kibbutz in Israel. 

Chuck KF8TI was a Peace Corps Volunteer in the Philippines.