QRPp Back Issues (and some new ones too!)

Here's an index: 

http://www.k7qo.net/qrpp_toc_de_k7qo.pdf

And here are lot of the back issues:

http://www.ncqrpp.org/

And I see there are August and September 2016 editions available in the Files section (KI6DS)  of the qrp-tech Yahoo group.  Did I see articles there from Steve "Snort Rosin" Smith?

"The Radio Times"

Wonderful stuff:

https://en.wikipedia.org/wiki/Radio_Times

Un-modifying an S-38 in 1966, and the Urge to Build

Michael mentioned this article in the Comments section under yesterday's post.  March 1966 issue of 73 magazine.  Page 26.  Just click on the images for easier reading.   Or you can find the article here:

http://archive.org/stream/73-magazine-1966-03/03_March_1966#page/n27/mode/1up

More S38 wisdom from 73 here:

http://archive.org/stream/73-magazine-1976-11/11_November_1976#page/n89/mode/1up

That's the November 1976 issue, page 88.

I miss "73".

November 2015 QST -- Wrist Radios, Phase Noise, and a 1958 BITX!

A Early BITX

I liked this issue.  Highlights:

Page 30.  Glen Popiel's article on the Arduino.

Page 33.  I know this may come as a surprise, but in spite of my admitted Ludite tendencies, I found the article on High-Speed Wireless Networking to be very intriguing.   

Page 38.  Hey!  Mike Aiello N2HTT has an article about an Arduino-based CW recorder.  FB Mike!

Page 54.  Review of LNR LD-5 QRP Transceiver. "The LD-5 is actually an SDR in a box with switches and knobs..."  They give a phase noise graph.

Page 58.  Review of Synthesizer upgrade for the Elecraft K3.  Uh-oh.  Phase noise again.  The review says the upgrade results in a reduction of phase noise, but the graphs seem to show an increase in transmitted phase noise on 20 meters as soon as you go 10 kHz from the transmit frequency.  I guess this is a tradeoff for a larger decrease in close-in (less than 1 kHz spacing) phase noise?  But if the objective on the transmit side is to deal with "a major problem with multiple operators in the same band segment in close proximity" resulting from transmitted phase noise,  is this a good trade-off?   Also, it would  have been interesting to know if the reviewer could detect -- by ear -- any improvement in the received signal.  

Wayne Burdick, N6KR, of Elecraft e-mailed us to let us know that there was an error in this QST article.  The original graph in the article showed an improvement in phase noise at close-in frequencies, but it also showed a significant worsening of the phase noise beyond 10 kHz.  THIS CHART WAS INCORRECT.    The Upgrade does, in fact, improve the phase noise performance.  A corrected version of the article appears here:

    http://www.elecraft.com/K3/QST%20KSYN3A%20revised.pdf

 

Here is the corrected graph:

 

 

Page 71.  My nightmare.  The WristRig.  The Apple Watch on 40 meters.  Sorry Steve, Dick Tracey did not have The Knack, and tackling the "Apple Watch challenge" is not an indication of "homebrew chops."  Software coding chops yes, but homebrewing is, for me, a different thing.   (But, as we always say, too each his own... And thanks to Steve for the interesting article. )

Page 82.  Ross Hull.  Very interesting article, especially the part about OM Ross's untimely death by electrocution.

Page 100.  "The Cosmophones" by Joe Veras.  Cool pictures (as always) from Joe.  And I loved the first lines:  "What in the world is a bilateral transceiver?  Byron Goodman, W1DX, posed that question in his June 1958 QST review of  the Cosmophone 35."    Wow, four months before my birth By Goodman was writing about BITXs in QST!

Been There, Done That: "...he begged his oscillator to osc and his amplifiers to amp."

This ad is from the December 1931 issue of QST.   This copy has a LOT of mileage on it.   In 1993 or 1994, David Cowhig (now WA1LBP) was living in Okinawa Japan and was operating as 7J6CBQ.   I was living in the Dominican Republic and operating as N2CQR/HI8.   We were both contributing to a 73 magazine column (as "Hambassadors"!) and we were both in the Foreign Service.   I wrote to David -- he wrote back, sending me some old QSTs, including the one from which the above ad is taken.

This ad shows that many of the homebrew/troubleshooting woes that we face today are very old.  And that having access to good technical books is very important when you are trying to overcome these difficulties.  

Our book: "SolderSmoke -- Global Adventures in Wireless Electronics" http://soldersmoke.com/book.htm Our coffee mugs, T-Shirts, bumper stickers: http://www.cafepress.com/SolderSmoke Our Book Store: http://astore.amazon.com/contracross-20

American Radio History Site -- Lots of Radio Magazines

 

Hi Bill,

I wanted to leave you feedback on your podcast.

I love it!  Keep it up.  I travel quite often in my work and listen to
all your podcasts.

Since my early teens in the late 70's I started subscribing to
electronic magazines (which I have still keep all every issue).  I just
found a site that has all the old electronic magazines scanned and
posted for all to read.  What a resource!http://www.americanradiohistory.com 
It has all the old Popular
Electronic Magazines, Radio Electronic Magazines, Modern Electronics,
Electronics Illustrated, etc, in pdf format. Information from the turn
of the century ...  Wow.  Back when radio hobbyists made their own
chassis for their valve radios.  Just google American Radio History and
it will be a top link.  You might want to share this link with your
friends, and listeners.

I have purchased your Soldersmoke book from Lulu -- Thumbs  up!! Great Book.

Thanks again for sharing your experience with radio and the knack.

Greg Self
N8YCB
ps:
I have always called  kluge -  KLOO-guh ..  and I don't know why. ;)

Our book: "SolderSmoke -- Global Adventures in Wireless Electronics" http://soldersmoke.com/book.htm Our coffee mugs, T-Shirts, bumper stickers: http://www.cafepress.com/SolderSmoke Our Book Store: http://astore.amazon.com/contracross-20

SolderSmoke Podcast 173: Pete's LBS Triumph and Bill's Tale of QRO Woe

SolderSmoke Podcast #173 is available:

http://soldersmoke.com/soldersmoke173.mp3

7 March 2015

Bench Report:   Pete's Progress on the Let's Build Something Rig:
http://www.jessystems.com/LBS_Detail.html
Ben's cool case for his LBS rig
Bill's Tale of Woe:  QRO troubles with the BITX 40
    -- QRO amplifier taking off on 40 (but not 17)
    -- Criticism and public humiliation on 40
    -- Troubleshooting
    -- Suggestions from Allison
    -- A sad realization about my VFO frequency selection
    -- Exorcism needed
    -- Pete suggests a digital solution
    -- Wow, my 'scope has an FFT!  Almost a spectrum analyzer!
    -- Some thoughts on trouble shooting
    -- On the meaning of "BASTA!"
The Spring 2015 Issue of Hot Iron http://www.walfords.net
More on Pete's KX3
Encouraging other hams to build

 

Our book: "SolderSmoke -- Global Adventures in Wireless Electronics" http://soldersmoke.com/book.htm Our coffee mugs, T-Shirts, bumper stickers: http://www.cafepress.com/SolderSmoke Our Book Store: http://astore.amazon.com/contracross-20

Navassa Island 1972

The K1N DX-pedition is currently on Navassa Island (between Jamaica and Haiti).   This made me think of one of my earliest ham radio memories:  The 73 Magazine article on a 1972 operation on that island.   Here is a short video on that trip.  It is kind of wacky and fun. 

Our book: "SolderSmoke -- Global Adventures in Wireless Electronics" http://soldersmoke.com/book.htm Our coffee mugs, T-Shirts, bumper stickers: http://www.cafepress.com/SolderSmoke Our Book Store: http://astore.amazon.com/contracross-20

A Thatched Roof, Some Palm Trees, A Dipole, and a Homebrew Rig

 

Look at the drawing above.  That is the banner logo of Rod Newkirk's column in QST magazine.  For many years Rod regaled us with exciting reports on the activities of intrepid foreign radio amateurs, transmitting from exotic locations using ingeniously devised homebrew radio equipment.  Look at the picture on the left side.  See the palm trees?  See the thatched roof shack with the dipole antenna?  Well, that's pretty close to what it was like for me out on the Samana Peninsula in the Dominican Republic last month. 

I set up the station under the thatched roof in this picture:

The red pins mark the spot:

Here I am, tuning the rig while looking across Bahia Rincon: 

The rig was my Azores-built, oft-modified, NE602-based, ceramic resonator DSB transceiver with a recently added India-designed BITX IRF510 RF amplifier chain.  A little article I wrote about the ceramic resonator VXO was featured in SPRAT 127.  My antenna was a half wave dipole strung up in the thatched roof. Power came from 10 AA Batteries.  So this was the Double A, Double Sideband, Dipole DX-pedition.   

I had given some thought to building an SSB rig for this trip, but because of the efforts of Peter Parker, VK3YE, I felt compelled to take a DOUBLE Sideband rig with me to the beach. 

Here is an old (2006) video on the rig.  The power amplifier has been significantly modified: 




Here is some more information on the rig, including a schematic for the receiver and the SPRAT article on the Variable Ceramic Oscillator:

http://www.gadgeteer.us/PORTABLE.html
 
Here is the log book for my contacts.   

17 DECEMBER 2014

W1JPR PAUL MT. DESERT ISLAND MAINE

8P6AE (BARBADOS) COULD BARELY HEAR ME, BUT GOOD QSO

18 DECEMBER 2014

N4USA DAVE IN FLOYD, VA. FAIRS NET. (KK4WW.COM)

KE4UGF DON ALSO FAIRS, NICE GUYS. FUN CONTACTS!

KA4ROG ROGER NORTH OF ORLANDO

19 DECEMBER 2014

WB2HPV GUIDO TALKING TO ITALIANS EVERY MORNING FROM WAYNE NJ.  HE HAD TROUBLE HEARING ME.   

CONDITIONS SEEMED POOR, BUT I WAS HEARING AUSTRALIAN STATIONS

W8GEO GEORGE IN THE INTERCON NET.  HEARD ME.  ALSO ON INTERCON: KA4AOQ AND 6Y5MP (JAMAICA) ALSO HEARD ME.

N4PD PAUL

W3JXY/4 NAT IN KEY WEST

N1FM TOM, NORTH OF MIAMI SOLID QSO.

KM4MA PAUL IN ORLANDO WITH MARITIME MOBILE NET.

20 DECEMBER 2014

NA2LF LLOYD IN NY

WB8YWR JIM IN DALLAS 

KM4MA.

W1AW/3 IN MARYLAND (TOOK ME A WHILE TO GET HIM)

21 DECEMBER 2014   NICE 4 WAY SPANISH LANGUAGE QSO:

KI4PZE MIGUEL

CO8OT JUAN IN SANTIAGO DE CUBA

WA4RME RAFA IN CHARLESTON S.C.

C08KB MARCO IN CUBA

Here is a short video showing the station and the location.  Note the little birds (Golondrinas or Swallows) flying by.  They nest in the thatched roof.   They often got confused and flew inside the house.  Billy and Maria rescued many of them.  Whales breed in this bay in January and February.  There are also  manatees.  It is really a beautiful place. 

There were obviously other attractions (!) so I didn't spend a lot of time on the radio -- just a half hour or so every now and then.  But it was really very satisfying to carry this little homebrew device with me, set it up in this amazing place, and use it to send my voice across mountains and hundreds of miles of ocean.   I built this rig in the Azores and have used it in the UK, France, Italy and the Dominican Republic.  It contains circuits devised by members of the British QRP club and by my friend Farhan in India.  The ceramic resonator circuit is something I cooked up on my own.  The microphone is from my old Sony Walkman and the pen that serves as its support is from that wonderful magazine "Electric Radio."  In short, there is a lot of soul in this little machine.  And it was a lot of fun to take it to the beach.  

Thanks to Elisa for finding us this wonderful place.  And to Rod Newkirk and QST for the DX inspiration. 


Our book: "SolderSmoke -- Global Adventures in Wireless Electronics" http://soldersmoke.com/book.htm Our coffee mugs, T-Shirts, bumper stickers: http://www.cafepress.com/SolderSmoke Our Book Store: http://astore.amazon.com/contracross-20

A Very Simple and Stable VFO

From the November 1964  issue of 73 Magazine, by way of a compendium book sent to me from New York City by Dave W2DAB, comes words of wisdom about how to make a simple, super-stable VFO. Lots of great ideas in this article.  My favorite was running the thing off D cell batteries and leaving it on all the time!  The article was written by Roger Taylor, K9ALD. 

Here is the article: 

http://archive.org/stream/73-magazine-1964-11/11_November_1964#page/n11/mode/1up

Thanks to Dave, Roger, Wayne Green and the Internet Archive. 

Our book: "SolderSmoke -- Global Adventures in Wireless Electronics" http://soldersmoke.com/book.htm Our coffee mugs, T-Shirts, bumper stickers: http://www.cafepress.com/SolderSmoke Our Book Store: http://astore.amazon.com/contracross-20

Building a Better Diode Ring Balanced Modulator (with Knack Karma)

So yesterday Pete and I were talking about Dave W2DAB's Michigan Mighty Mite malady. Dave is tantalizingly close to the joy of oscillation.  Wizard that he is, I think Pete diagnosed the problem with his eyes closed from 3000 miles away.  I sent Dr. Juliano's prescription to Dave this morning and expect the concrete canyons of Upper Manhattan to be ringing with pure 800 Hz tones as soon as Dave fires up his soldering iron. 

Anyway, I then told Pete that I'd been looking through my bookshelf for something suitable for my 11 year-old nephew Sebastian.  I found something for him, but I also came across a book that was too advanced for the young fellow:   "The Master Handbook of Ham Radio Circuits." TAB Books, 1977.  By "The Editors of 73 Magazine."   Between turkey sandwiches I started looking through this book.  I immmediately found an article of interest:  "A Better Balanced Modulator."   The author (unnamed) looks closely at the performance of our beloved and much-used diode ring mixer with dual trifilar transformers.  He concludes that the unbalanced input and output coils (in the traditional configuration) detracts from the balance needed for optimum carrier suppression.  He suggest the use of baluns at input and output (see above) and claims significant improvement in carrier suppression.   Very interesting. (If anyone wants to dig into this, e-mail me.)  There is also a very simple solid-state VFO circuit that promises phenomenal stability.   

Anyway,  I found myself trying to remember where this great book came from.  Then I remembered someone sending it to me.  A quick check of my e-mail revealed the source:  Dave W2DAB sent it to me three years ago.  Thanks again Dave!  


Our book: "SolderSmoke -- Global Adventures in Wireless Electronics" http://soldersmoke.com/book.htm Our coffee mugs, T-Shirts, bumper stickers: http://www.cafepress.com/SolderSmoke Our Book Store: http://astore.amazon.com/contracross-20

Some Inspiration on Receiver Building

As a result of all the recent toob talk with Pete Juliano I've been going to work with old copies of Electric Radio in my backpack.  Yesterday, somewhere in the tunnel under the Potomac River, I read these inspiring words from master receiver builder Bob Dennison, W2HBE (SK): 

"Part of the fun in the radio building hobby is tearing up a set after a short period of use so its parts can be used again in a bigger and better set. Another order is sent to Allied Radio for an audio transformer, an RF choke, a vernier dial and some of those exquisitely beautiful Hammarlund variable condensers.  Oh what a joy it is! You just haven't lived until you've built a whole series of progressively more exotic receivers.  Give it a try!"  (ER, March 1993) 

Our book: "SolderSmoke -- Global Adventures in Wireless Electronics" http://soldersmoke.com/book.htm Our coffee mugs, T-Shirts, bumper stickers: http://www.cafepress.com/SolderSmoke Our Book Store: http://astore.amazon.com/contracross-20

WA0RBR's Fun-Rig

Last night I called CQ on 20 CW (with my Arduino keying the homebrew transmitter!) and was answered by Mark, WA0RBR.   I Googled the call and found that Mark is quite a homebrewer.  He wrote a nice series of articles for 73 magazine in the early 80's.   Here they are:

http://mikeyancey.com/73mag/listauthor.php?Author=WA0RBR


Our book: "SolderSmoke -- Global Adventures in Wireless Electronics" http://soldersmoke.com/book.htm Our coffee mugs, T-Shirts, bumper stickers: http://www.cafepress.com/SolderSmoke Our Book Store: http://astore.amazon.com/contracross-20

DSB Audio -- Why Worry?

In a recent post I mentioned my concern about shaping the audio frequency response of my DSB transmitters.   This concern was sparked by an article in the May 1993 issue of "Electric Radio" magazine.   John Staples, W6BM,  had an article (the first in a three part series) entitled "Good Audio." The article (like most of ER) was focused on AM rigs and, it seems to me, contains a lot of technical wisdom.  Here is the part I found most relevant: 

"Good hamband AM audio is not the same as hi-fi audio. A broadcast-quality transmitter fed with a broadcast quality mike would sound flabby and under modulated. The highs would be lost in the narrow bandwidth of the receiver. The low frequency component would dominate the modulation power, but would be lost to the low frequency roll-off in the receiver.  What's left of the mid-range would sound weak, and the signal would lack punch.  Proper response shaping results in audio that sounds powerful, natural and undistorted." 

This seems to apply to DSB (suppressed carrier) audio just as well. 

Our book: "SolderSmoke -- Global Adventures in Wireless Electronics" http://soldersmoke.com/book.htm Our coffee mugs, T-Shirts, bumper stickers: http://www.cafepress.com/SolderSmoke Our Book Store: http://astore.amazon.com/contracross-20

Il Fido -- A Simple Receiver from Italy

As part of a refresher course in Italian, I am reading a bunch of old radio magazines from Italy sent to me by Stephen.   There are some really wonderful projects in these magazines and I feel compelled to share them with the SolderSmoke community.  No full translations yet, but perhaps that would provide a good language learning opportunity.  For now, just schematics and drawings (aren't they beautiful?).   

This one is a simple crystal receiver with one stage of AF amplification.  It covers the AM broadcast band, the HF bands, and (apparently) VHF using a switch and three different coil/capacitor combinations.  You could make it a lot simpler by just building it for one band.  Looks to me like a nice rig for an Altoid tin. 

Our book: "SolderSmoke -- Global Adventures in Wireless Electronics" http://soldersmoke.com/book.htm Our coffee mugs, T-Shirts, bumper stickers: http://www.cafepress.com/SolderSmoke Our Book Store: http://astore.amazon.com/contracross-20

GE Ham News -- All of Them! (1946-1963)

Walter, AJ4UM, alerted us to this. Here's yet another treasure trove of ham radio literature.  I'm going to have to retire just to make time to read all the stuff that is coming on line! 
http://n4trb.com/AmateurRadio/GE_HamNews/ge_ham_news.htm


Our book: "SolderSmoke -- Global Adventures in Wireless Electronics" http://soldersmoke.com/book.htm Our coffee mugs, T-Shirts, bumper stickers: http://www.cafepress.com/SolderSmoke Our Book Store: http://astore.amazon.com/contracross-20

EDN Article on Performance of Modern Ham Transceivers

Mike, KC7IT, alerted us to a very interesting EDN article about the performance of modern ham transceivers:
http://www.edn.com/article/521690-High_performance_HF_transceiver_design_A_ham_s_perspective.php?cid=Newsletter+-+EDN+Fun+Friday


On the phase noise, how do old fashioned LC or crystal oscillators compare to modern PLL or DDS circuits?


And congrats to Elecraft for the high ratings on their K3.



Our book: "SolderSmoke -- Global Adventures in Wireless Electronics" http://soldersmoke.com/book.htm Our coffee mugs, T-Shirts, bumper stickers: http://www.cafepress.com/SolderSmoke Our Book Store: http://astore.amazon.com/contracross-20

73 Magazine -- Online!

Some of my earliest ham radio memories are of 73 Magazine. Perhaps this has something to do with the electro-erotica cover shots of the early 1970s! I used to buy copies at "Electronics 59" in Spring Valley, New York. I remember struggling to understand the magazine: Why were these guys so obsessed about going to Navassa Island? Why was there a column entitled "Never Say Die?" Why was the classified section entitled "Caveat Emptor?" In time, all this would become clear to me. Occasionally, I'll come across an old issue and will suddenly remember it from when it first came out. I must have read these things cover-to-cover. (Jean Shepherd recalled reading even the grommet ads in the old QSTs.)

I really liked 73. It always had a zany, edgy, kind of "out-there" feel to it. Of course, near the end it went too far off the reservation (Bio-electrifiers? Faked moon walks?)

This morning QRP-L brings us the news that all the back issues are available on-line:

http://www.archive.org/search.php?query=collection%3A73-magazine&sort=-publicdate

I'm hoping that somewhere in there we will be able to find that early 70's article about the varactor-tuned DC receiver that I tried to build but couldn't get working.

Our book: "SolderSmoke -- Global Adventures in Wireless Electronics"http://soldersmoke.com/book.htmOur coffee mugs, T-Shirts, bumper stickers: http://www.cafepress.com/SolderSmokeOur Book Store: http://astore.amazon.com/contracross-20